SP-193: Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction - Pro

Price: $ 83.50 USD

Choose Product Language

Choose Product Units

Choose Product Format



Note: The individual papers are also available as .pdf downloads. Please click on the previous link to view the papers available, or call 248.848.3800 to order.

Editor: V.M.Malhotra


In September 2000, the American Concrete Institute sponsored the ACI Fourth International Conference in Seoul, Korea. Sixty-two papers are included in this publication.


Document Details

Publication Year: 2000

Pages: 1096

ISBN: 9780870316913

Categories: Repair

Formats: PDF

Table of Contents

Curing of High-Performance Concrete for Strength-What is Sufficient?

By N.J. Carino and K.W. Meeks.

Slurries for Restoration of Historical Brickwork Buildings in Northern Germany

by K.G. Bottger and D. Knofel

Application of Fiber-Reinforced Shotcrete in Repair of Tunnel Linings in Hong Kong

by A.P.-C Sze and C.T.-W. Chan

Influence of Latex Paint Compositions on Concrete Against Chloride Penetration

by K.L. Uemoto and V. Agopyan

Experimental Study on Crack Repair by Electrochemical Method

by J.S. Ryu, No. Otsuki, and H.Y. Moon

Assessment of Diffusion Coefficient of Chloride Ions in Mortars Using Different Types of Binders

by N. Otsuki, M. Hisada, H. Minagawa, and S. Miyazato

Reproduction of Ancient Cementious Material used in China 5000 Years Ago

by K. Asaga, M. Daimon, Z.X. Li, and Y. Furusawa

Study of Electrochemical Rehabilitation of Chloride Contaminated Reinforced Concrete

by K. Ishibashi, M. Kanda, Y. Furukawa, and T. Mihara

Repair of Deteriorated Reinforced Concrete Slabs

by T. Yamamoto

Repair Methods of Chloride-Induced Corrosion of Reinforced Concrete During 10 Years' Exposure

by H. Edahiro, K. Fujii, Y. Masuda, T. Kemi, T. Inoue, and H. Jitousono

Effect of Ground Granulated Blast-Furnace Slag on Properties of Autoclaved and Combined Wet/Dry Cured Polymer-Modified Mortars.

By M. Joo, Y. Ohama, and K. Demura

Identification of Cracking Damages of Concrete Structures Using Acoustic Emission

by B.H. Oh, K.S. Kim, and E.J. Kim

Long-Term Effects of Corrosion Inhibitors for Mortar Specimens Made of Natural Sea Sand and Sea Water

by K.J. Kim, J.G. Nam, J.A. Jeoung, and D.H. Jeon

Effect of Aluminum Oxide-Isocy Anate Coating Material for Protection of Steel Reinforcement in Concrete Against Corrosion

by H.Y. Moom, S.S. Kim and H.S. Kim

Scaling Resistance of Ordinary and Very Early Strength Concrete Reinforced with Polypropylene Fibers

by K.K. Yun, J.H. Lee, C.W. Hong, and J.S. Park

Tension Stiffening Model for Steel Fiber-Reinforced Concrete Members

by C.W. Hong, K.K. Yun, B.H. Lee, and J.H. Lee

Influence of Different Curing Conditions on Strength and Durability of High-Performance Concrete

by M.F.M. Zin, Md. Safiuddin, and K.M. Yusof

Repair and Rehabilitation of Lae City Port in Papau New Guinea

by A.K. Aggarwal and L.K. Niap

Fireproof Concrete Masses for Lining in Foundry

by S. Pavlenko and I. Rekhtin

Performance Evaluation of Cement-Based Surface Coatings

by S.U. Al-Dulaijan, M. Maslehuddin, M.M. Al-Zahrani, e.A. Al-Juraifani,

S.H. Al-Idi, and M. Al-Mehthel

Substrate Absorption and it's Influence on Plastic Shrinkage of Repair Material

by K.C.G. Ong, W. Xu, and P. Paramasivam

Ferrocement in Structural Upgrading and Rehabilitation- an Overview

by P. Paramasivam, C.T.E. Lim, and K.G.G. Ong

Interactions Between Surface Coatings and Their Concrete Substrate

D.W.S. Ho and S.L. Mak

Surface Applied Corrosion Inhibitor

T.A. Burge

Application of Roller-Compacted Concrete for Rehabilitation of Dams

by T.C. Liu and J.E. McDonald

Repair of High-Strength Concrete Walls Using Low-Pressure spray-Up Techniques

by G.C. Hoff

Development of Performance Criteria for Dimensionally Compatible Cement-Based Repair Materials

by J.E. McDonald, P.H. Emmonds, A.M. Vaysburd, and D.W. Scott

Application of Lightweight Concrete with Expanded Polystyrene Granules for Concrete Slab Construction

by D. Vasovic and T. Vasovic

Influence of Steel Fibers on Cracking Behavior of Ordinary Reinforced Concrete Structures

by L. Vandewalle

Upgrading Reinforced Concrete Columns by Jacketing with Carbon Fiber-Reinforced Plastic (CFRP) Sheets

by M.N. Darwish

Role of Fibers in Controlling Failure Modes of High-Strength Concrete Beams

by M. Imam and L. Vandewalle

Shear Repair of Reinforced Concrete Beams Using Post-Tensioning

by A.R. Khaloo

Bonding Shear Strength of Adhesives Between Precast Concrete Elements

by M. Ali, S. Kurihara, and S. Matsui

Simplified Design Method for Ultimate Capacities of Circularly Confined High-Strength Concrete Columns

by S. Yuping and S. Kenji

Enhancement of Shear Strength for Reinforced Concrete Beams Using Externally Bonded Fiber-Reinforced Polymer Sheet

B.B. Adhikary and H. Mutsuyoshi

Development of Optical Fiber Sensor for Monitoring Concrete Performance

by H. Hamada, T. Yamaji, K. Hayakawa, and H. Yamashita

Seismic Retrofitting of Reinforced Concrete Bridge Piers and Concrete Members Using Thermographic Technique

by T. Kamada, T. Kawase, M. Kunieda, and K. Rokugo

Detection of Interfacial Flaws Between Steel Plates and Concrete Members Using Thermographic Technique

by T. Kamada, T. Kawase, M. Kunieda, and K. Rokugo

Improvement In Water Resistance of Polymer-Modified Gypsum-Based Composites

by Y. Ohama, K. Demura, M. Joo, T. Katsuhata, D. Sugawara, and D.W. Fowler

Deformation Demand of Precast Concrete Frame Building with Ductile Connection

by S.Y. Seo, N.M. Hawkins, and L.H. Lee

Nonlinear Strut-Tie Model Approach in Structural Concrete Deep Beams

by Y.M. Yun

Cyclic Inelastic Strut-Tie Modeling of Shear-Critical Reinforced Concrete Members

by J.H. Kim and J.B. Mander

Analaysis of Shear Damage Accumulation of Reinforced Concrete Beams Under Repetitive Fatigue Loadings

by B.H. Oh and S.H. Han

Durability Assessment of Concrete Bridge Slab Rehabilitated by Joint-Elimination Method

Mechanical Anchorage of Bars with Screw-Type Coupler and Perforated Plates in Precast Concrete Beam-Column Joint

by Y.C. You, K.D. Choi, K.H. Kim, and L.H. Lee

Analytical Evaluation of Structural Performance of Reinforced Concrete Beams Considering Degree of Reinforcing Bar Corrosion

by H.S. Lee and T. Noguchi, and F. Tomosawa

Strength Reduction Factors for Flexural Design of Concrete Beams Prestressed with Fiber-Reinforced Plastic Tendons

by S.M. Jeong

Shear Behavior of Beams Without Transverse Reinforcement

by S. H. Cho and L.H. Lee

Capactity Evaluation of Repaired Structural Walls Having Special Detailing for Moderate Seismic Zone

by S.W. Han, Y.M Lee, C.H. Oh, and L.H. lee

Proposal for Development of Positive Moment Reinforcement

by S.G. Hong and D.J. Kim

Overview of Anchorage Problems of Reinforcing Bars in High-Performance Silica Fume Concrete

by B.S. Hamad

Macro-Versus Micro-Mechanical Behavior of Plain and Steel Fiber Concrete Subjected to Internal Deformations

by P. Stroeven, D.H. Dalhuisen, and A.T. Moczko

Ferrocement Repaired Reinforced Concrete Beams Subjected to Quasi-Static and Cyclic Loadings

by C.T.E. Lim, K.C.G. Ong, and P. Paramasivam

Bridge Spatial Displacement Monitoring with Fiber Optic Deformatins Sensors

by S. Vurpillot, P. Kronenberg, and D. Inaudi

Strengthening of Reinforced Concrete Beams Using Prestressed Glass Fiber-Reinforced Plastic

by Y.L. Huang, T. Yen, J.H. Wu, and C.L. Ong

Rehabilitation of Moderately Damaged Reinforced Concrete Buildings After June 27, 1998 Ceyhan Earthquake

by G. Ozcebe, H. Sucuoglu, M.O. Spmivar, and T. Gir

Flexural Strength of Continuous Reinforced Concrete Beams with Externally Bonded Carbon Fiber-Reinforced Polymer Reinforcment

by S.A. El-Refaie, A.F. Ahour, and S.W. Garrity

Formulation of Optimal Strut-and-Tie Models in Design of Reinforced Concrete Structures

by M.A. Ali and R.N. White

Strengthening of Concrete Structures with Carbon Fiber-Reinforced Polymer and Results from Nondestructive Evaluation

by J.G. Parzych and P. Mtenga

Use of Stainless Steels 316LN and Duplex 2205 In Bridge Deck Construction in North America

by B.N. Neuhart

Influence of Corrosion on Bon Behavior of Reinforcement Bars

by Y. Auyeung, P. Balaguru, and L. Chung

Tensile Strength and Durability Performance of Cement-Based FRP Composite Wrapped Specimens

by H.A. Toutanji


Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).