Title:
Investigating Various Factors Affecting the Long-Term Compressive Strength of Heat-Cured Fly Ash Geopolymer Concrete and the Use of Orthogonal Experimental Design Method
Author(s):
Hongen Zhang, Lang Li, Prabir Kumar Sarker, Tao Long, Xiaoshuang Shi, Qingyuan Wang
Publication:
IJCSM
Volume:
14
Issue:
Appears on pages(s):
Keywords:
orthogonal experimental design (OED), geopolymer concrete, mortar–aggregate interface zone (MAIZ), Na2O/SiO2 molar ratios, Si/Al molar ratio
DOI:
10.1186/s40069-019-0375-7
Date:
1/31/2020
Abstract:
This work quantified the hierarchy of the influence of three common mixture design parameters on the compressive strength and the rate of strength increase over the long term of low-calcium fly ash geopolymer concrete (FAGC) through designing 16 mixtures by the orthogonal experimental design (OED) method. The parameters used in the study were liquid to fly ash (L/FA) ratio, sodium hydroxide concentration (SHC) and sodium silicate solution to sodium hydroxide solution (SS/SH) ratio. The L/FA ratio showed little effect on compressive strength when it was varied from 0.40 to 0.52. SHC showed the greatest influence on compressive strength with little impact on the rate of strength increase after the initial heat curing. Even though the SS/SH ratio showed a small effect on the initial compressive strength, it had a considerable influence on the rate of strength increase over the long term. It was found that the
compressive strength at 480 days was positively related to the Na2O/SiO2 molar ratio when it was varied from 0.49 to 0.80 and the Si/Al molar ratio was increased up to 1.87. Analysis of the failure types of specimens demonstrated that compressive strength of FAGC was associated with the strength of the mortar–aggregate interface zone (MAIZ).