Title:
After Two Hundred Years of Estimating Evaporation, It Is Still a Mystery
Author(s):
Kenneth C. Hover
Publication:
Symposium Paper
Volume:
338
Issue:
Appears on pages(s):
10-28
Keywords:
Bleeding, Cracking, Curing, Drying, Evaporation, Finishing, Shrinkage, Weather
DOI:
10.14359/51724723
Date:
3/1/2020
Abstract:
PCA researchers interested in the problem of evaporation of bleed water from concrete surfaces borrowed an equation developed by hydrologists to predict evaporation from Lake Hefner in Oklahoma. PCA’s graphical representation of that equation, subsequently modified to its present form by NRMCA, was later incorporated into
multiple ACI documents, and is known by concrete technologists world-wide as the “Evaporation Rate Nomograph.” The most appropriate use of this formulation in concrete construction is to estimate the evaporative potential of atmospheric conditions (known as “evaporativity”). Since the difference between actual and estimated evaporation rate can be in the range of ± 40% of the estimate, best use of the equation as routinely applied is as a
semi-quantitative guide to estimate risk of early drying and inform decisions about timing and conduct of concrete placing and finishing operations. Use of the “Nomograph” and related “Apps” in specifications is more problematic, however, given: 1.) the inherent uncertainty in its underlying equation, 2.) the difficulty in obtaining input data that appropriately characterize jobsite microclimate, and 3.) establishing a mixture-specific criterion for tolerable evaporation rate.
Related References:
Abtew,W., Melesse,A., Evaporation and Evapotranspiration: Measurements and Estimations Springer, 2013, 206 pp.
ACI Committee 302,”Guide to Concrete Floor and Slab Construction, 302R.1R-15,”American Concrete Institute, Detroit, 2015, 20 pp.
ACI Committee 305,”Hot Weather Concreting,” ACI 305R-99, American Concrete Institute, Detroit, 1999, 20 pp.
ACI Committee 308, “Guide to Curing Concrete,” ACI 308R-01, American Concrete Institute, Detroit, 2001, 31 pp.
ACI Committee 308, 308R-16 Guide to External Curing of Concrete, American Concrete Institute, Detroit, 2016, 40 pp.
Al-Fadhala, M., Hover, K.C., “Rapid Evaporation from freshly cast concrete and the Gulf Environment,” Construction and Building Materials (Edinburgh), Vol. 15, No.1., January 2001, pp 1-7.
ASTM C232/C232M–14, “Standard Test Method for Bleeding of Concrete, ASTM International, West Conshohocken, PA, 2017, 3 pp.
ASTM C1064/C1064M-17 “Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete,” ASTM International, West Conshohocken, PA, 2017, 3 pp.
Brutseart, W. (1982): Evaporation into the atmosphere: theory, history and application. D. Reidel Publ.Co., Boston. 299p.
Brutsaert, W., Yeh, G-T. (1970). Implications of a Type of Empirical Evaporation Formula for Lakes and Pans. Water Resources Research. 6. doi: 10.1029/WR006i004p01202
Cornell University, Cayuga Lake Weather Plots, Remote Underwater Sampling Station, Ithaca, NY, 2018, http://www.cayugalake.cornell.edu
CRC Handbook of Chemistry and Physics, 68th Edition, 1987
Dalton, J., 1802, “Experimental Essays on Evaporation,” Manchester Literary and Philosophical Society, Proceedings, V. 5, pp. 536-602.
Dilley, A. C., "On the Computer Calculation of Vapor Pressure and Specific Humidity Gradients from Psychometric Data." J. Appl. Meteor., Aug. 1968.
Hillel, Soil and Water Physical Principles and Processes, Academic Press, New York, 1971, p.184.
Hover, K.C., “Evaporation of Surface Moisture: A Problem in Concrete Technology and Human Physiology,” Concrete in Hot Climates, M. J. Walker, ed., Proceedings of the Third International RILEM Conference on Concrete in Hot Climates, Torquay, England, Sept., E&FN Spon Publishers, London, 1992, pp. 13-24.
Hover, K.C., Burlingame, S.E., Lautz, C., “Opportunities and Challenges in Concrete with Thermal Imaging,” Concrete International, Vol. 26, No. 12, December, 2004, pp 23-2
Hover, K.C., “Evaporation of Water from Concrete Surfaces, ACI Materials Journal, Vol. 103, No. 5, Sept/Oct. 2006, pp. 384-389.
Hover, K.C., “Observed Variability in Tests of Fresh Concrete Properties from the FHWA Highway Materials Engineering Course,” Transportation Research Record: Journal of Transportation Research Board, Issue 2342, September 2013, p 61–75.
Jalota, S.K., and Prihar, S.S., 1998, Reducing Soil Water Evaporation with Tillage and Straw Mulching, Iowa State University Press, Ames, 142 pp.
Jones, F.E., Evaporation of Water with Emphasis on Applications and Measurements, CRC Press, 2018.
Kohler, M.A, “Lake and Pan Evaporation,” Water Loss Investigations: Lake Hefner Studies, Geological Survey Circular 229, U.S. Government Printing Office, Washington, 1952.
Kohler, M.A, “Lake and Pan Evaporation,” Water Loss Investigations: Lake Hefner Studies, Technical Report, Geological Survey Professional Paper 269, U.S. Government Printing Office, Washington, 1954, pp 127-148.
Kohler, M.A, Nordenson, T.J., Fox, W.E., “Evaporation from Pans and Lakes,” Research Paper no. 38, U.S. Department of Commerce, Washington, May, 1955.
Kosmatka, S.H., 1994, “Bleeding,” Significance of Tests and Properties of Concrete and Concrete-Making Materials, ASTM STP 169C, Paul Klieger and Joseph Lamond, eds., American Society for Testing Materials, Philadelphia, Pa., pp. 88-111.
Lerch, W., , “Plastic Shrinkage,” ACI Journal, Proceedings, V. 53, Feb. 1957, pp. 797-802.
Mills, G. A., “A Comparison of Some Formulae for the Calculation of Saturation Vapor Pressure Over Water." Meteorological Note No. 82, Bureau of Meteorology, Australia, Nov. 1975.
Menzel, C.A., 1954, “Causes and Prevention of Crack Development in Plastic Concrete,” Proceedings, Portland Cement Association Annual Meeting, pp. 130-136.
Murray, F. W, "On the Computation of Saturation Vapor Pressure." Appl. Meteor., V. 6, Feb. 1967.
National Ready Mixed Concrete Association, “Plastic Cracking of Concrete,” Engineering Information, NRMCA, Silver Spring, Md., July, 1960, 2 pp.
NOAA, “Wind Speed Measurements,” National Oceanic and Atmospheric Administration, US Department of Commerce (NOAA), 2018, https://www.ncdc.noaa.gov/crn/measurements.
Senbetta, E., and Brury, M.A., 1991, “Control of Plastic Shrinkage Cracking in Cold Weather,” Concrete International, V. 13, No. 3, Mar., pp. 49-53.
Snell, L., Rutledge, R., Wallace, N. “Evaluating Concrete Curing Conditions,” Southern Illinois University at Edwardsville, 1984, revised by Luke Snell and Marc Robertson, 1992.
Tang,R., Etzion,Y. “Comparative studies on the water evaporation rate from a wetted surface and that from a free water surface,” Building and Environment 39 (2004) 77 – 86
Tetens, O., "Uber einige meteorologische Begriffe 2.," Geophys. Y. 1930, pp.297-309.
Uno, P.J., 1998, “Plastic Shrinkage Cracking and Evaporation Formulas,” ACI Materials Journal, V. 95, No. 4, July-Aug., pp. 365-375.
Veihmeyer, F.J., 1964, “Evapotranspiration,” Handbook of Applied Hydrology, V.T. Chow, ed., McGraw Hill, pp. 11-1 to 11-38.
Virginia Department of Transportation, 1997, Specifications for Highway and Bridge Construction