Sessions & Events

 

Please note: All sessions and events take place in Central Daylight Time: CDT (UTC-5).

H=Hyatt Regency Dallas; U=Union Station

Convention Highlights

Monday, October 24, 2022


6:30 AM - 8:00 AM

ACI technical committee Chairs are expected to attend this breakfast workshop to meet with fellow Chairs, TAC members, and ACI staff to hear updates on important recent developments of interest to ACI technical committee Chairs. There will be table discussions and short presentations. If you are unable to attend, please ask the Secretary of your committee or another committee member to represent you in your absence. Attendance is by invitation only.


7:00 AM - 8:30 AM

Three-person panel will lead a discussion related to teaching methods that proved successful during COVID-19. Attendees will hear perspectives from a university faculty member, a university student, and an ACI staff member who was teaching certification courses. The speakers will share lessons learned and compare the methods they adopted during COVID-19 to those historically used during in-person teaching. The learning objective is to become aware of the latest teaching methods that proved successful when in-person learning transitioned to learning in a virtual setting.

Speakers:
- Jacob Henschen (Faculty)
- Madeleine Murphree (Student at University of Florida)
- Frances Griffith (University of Arkansas)


7:30 AM - 9:00 AM

Chapter Officers are invited to come and enjoy a delicious hot breakfast, while networking with peers from around the world. A special guest speaker, Gary Cornillie, Vice President of Hylant, will be available to answer any general liability and optional insurance questions.


8:30 AM - 10:30 AM

Moderator: F Alan Wiley

This session will present requirements of ACI CODE-307 - Standardization Requirements for Reinforced Concrete Chimneys - Code and Commentary. This revision has been completely reorganized to follow the current ACI 318 format. Additionally, technical changes for the along-wind load, across-wind load, and seismic design and detailing will be discussed.

The session will also present a history of concrete chimneys within ACI, as well as a proposed variable strength reduction factor for design of chimneys.

Attendees would include designers and contractors.

Learning Objectives:
(1) Discuss the historical development of the ACI 307 committee;
(2) Recognize the organizational and technical differences between ACI 307-08 and ACI 307-22;
(3) Explain how wind and seismic load information from ASCE 7-16 is applied to chimneys in ACI 307-22;
(4) Interpret how combined flexural and axial strength is determined in ACI 307-22 and understand the limitations of the method used.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


8:30 AM - 10:30 AM

Moderator: David G Tepke

Billions of dollars are spent each year in the United States addressing damage to concrete structures caused by corrosion of embedded reinforcing steel. Costs to address damage from corrosion can increase exponentially as damage becomes prevalent and considerable life-cycle cost savings can be achieved through preventative maintenance and proactive mitigation of ongoing corrosion prior to the onset of extensive damage. A variety of techniques are available for protecting structures from deleterious exposures and impeding corrosion once initiated. These sessions will present some of the newer trends and technologies for protecting concrete and mitigating on-going corrosion.
Who should attend: Contractors, Engineers, Researchers, Manufacturers
Learning Objectives:
(1) Describe new technologies, trends and applications for mitigating on-going corrosion on existing structures;
(2) Identify the factors that impact service-life modeling for existing structures;
(3) Discuss novel cladding technologies for repair;
(4) Assess galvanic corrosion and cathodic protection systems.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


8:30 AM - 10:30 AM

Moderators: Mohammed Albahttiti, Nishant Garg

This session will feature presentations of original, unpublished results from ongoing research projects and leading-edge concrete technology and research throughout the world.
Learning Objectives:
(1) Recognize ongoing concrete research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to structural and material aspects of concrete research;
(3) Describe engaging ideas in concrete research;
(4) Summarize recent technical information related to concrete materials and structures research.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


8:30 AM - 10:30 AM

Moderators: Andres Matos, Dulce Maria Trejo

This session aims to help Young Professionals have a better understanding of what a career transition entitles. A panel of young professionals with different backgrounds, goals, and scopes on transitioning their careers, will share their experiences with the attendees. The panel will also discuss how to set up professional goals and how to gain, develop and cultivate essential "soft skills" that are key for a smooth professional transition. In addition, the panel will discuss the importance of cultivating interpersonal skills in a highly technical environment.
Learning Objectives:
(1) Discuss experiences of transitions within the industry;
(2) Identify when a career change is needed or could help with professional development;
(3) Analyze the differences, pros, cons, and lessons learned from transitioning from Technical to Management, moving to a different location, serving in a different location, switching from private to public, and from school to work;
(4) Evaluate and explore the lessons learned to help attendees in their transitions as they grow into the profession.


9:00 AM - 10:00 AM

Moderator: Katelyn Low

This session will cover the basics of strengthening with externally bonded carbon fiber reinforcing polymer. Topics will include key strengthening design considerations such as required FRP area, material properties of FRP, spacing of FRP u-wraps, anchorage design/detailing, and constructability. The presentation will include a design example, highlight real-world project examples, and discuss research related to the development of the anchorage provisions. Where this methodology is outlined in ACI 440.2 will be presented.
Learning Objectives:
(1) Review design considerations to determine applicability of strengthening with FRP;
(2) Define requirements for strengthening with FRP;
(3) Summarize best practices for FRP anchorage;
(4) Identify upcoming guidelines for FRP.

This session has been AIA/ICC approved for 1 CEU/PDH credit.


10:30 AM - 12:00 PM

Moderators: Ahmed Al-Rahmani, Raikhan Tokpatayeva

The ACI 123 Concrete Research Poster Session compliments the existing Research in Progress and Open Topic Presentation sessions and provides further opportunity for the presentation of original, unpublished results from ongoing research projects and leading-edge concrete technology throughout the world.
Learning Objectives:
(1) Recognize ongoing concrete research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to structural and material aspects of concrete research one-on-one with the authors;
(3) Describe emerging ideas in concrete research;
(4) Summarize recent technical information related to concrete structures and materials research.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


10:30 AM - 11:30 AM

The ACI Student Forum provides an opportunity for student chapters and competition teams to exchange ideas and best practices. Student speakers will deliver presentations about their university activities and achievements. A limited number of presentations spots are available. Speakers may present as a group or an individual.


11:00 AM - 1:00 PM

Moderator: Maria S Konsta

This session will highlight recent research on nanoscale and microscale interaction mechanisms at the interfaces between the cementitious hydration products and nanomaterials; methods to characterize, control and strengthen these interactions; quantitative analysis of the interfaces and nanoscale texture of interfacial transition zone; and the link between atomic interactions, interfaces, and bulk concrete properties.

Learning Objectives:
(1) Interpret the composition and properties of the interfaces in concrete;
(2) Identify the role of interfaces in predicting the durability and performance of advanced cementitious materials;
(3) Discuss the importance of interfaces in designing multifunctional concrete;
(4) Investigate physicochemical characterization of interfaces in advanced cementitious materials.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


11:00 AM - 1:00 PM

Moderator: AHM Muntasir Billah

Bridge infrastructure serves as the backbone of the transportation industry, playing an often-overlooked role in the economy until service is disrupted. The sophistication of seismic design practices continues to improve and holds an expanding stake in maximizing service life of bridges in the research and engineering community alike. Multi-shock ground motion effects such as Mainshock-Aftershock earthquake sequences present another design challenge, as aftershocks typically occur within a time period where repairs to the initial damage incurred during the mainshock are not able to be realized. Most of the recent major earthquakes around the world were followed by aftershock events, and showed that structures’ vulnerability to higher levels of damage envisaged during design increases under multiple ground motion effects. Observations from recent earthquakes have shown that, when subjected to aftershocks, structures can experience greater damage as a result of significant reduction of stiffness and strength in structural components from mainshocks. Development and implementation of innovative analysis and assessment methods, design of bridges considering the MS-AS sequence are expected to improve the bridge seismic resilience and minimize traffic interruption.
Learning Objectives:
(1) Relate ongoing research studies on the performance of bridges under MS-AS sequences;
(2) Discuss the new experimental and numerical approaches for bridge analysis and design considering MS-AS ground motions;
(3) Discuss the new experimental and numerical approaches for bridge analysis and design considering MS-AS ground motions;
(4) Identify suitable ground motion selection techniques, proper intensity measures and demand parameters selection for bridge performance evaluation considering MS-AS sequences.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


11:00 AM - 1:00 PM

Moderator: David G Tepke

Billions of dollars are spent each year in the United States addressing damage to concrete structures caused by corrosion of embedded reinforcing steel. Costs to address damage from corrosion can increase exponentially as damage becomes prevalent and considerable life-cycle cost savings can be achieved through preventative maintenance and proactive mitigation of ongoing corrosion prior to the onset of extensive damage. A variety of techniques are available for protecting structures from deleterious exposures and impeding corrosion once initiated. These sessions will present some of the newer trends and technologies for protecting concrete and mitigating on-going corrosion.
Who should attend: Contractors, Engineers, Researchers, Manufacturers
Learning Objectives:
(1) Discuss modeling to address the presence of chlorides not removed before repairs;
(2) Explain mitigation of corrosion using surface sealers;
(3) Investigate case studies of repairs to mitigate corrosion;
(4) Assess the items of consideration when selecting a service-life extension method.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


11:00 AM - 1:00 PM

Moderators: Mohammed Albahttiti, Nishant Garg

This session will feature presentations of original, unpublished results from ongoing research projects and leading-edge concrete technology and research throughout the world.
Learning Objectives:
(1) Recognize ongoing concrete research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to structural and material aspects of concrete research;
(3) Describe engaging ideas in concrete research;
(4) Summarize recent technical information related to concrete materials and structure research.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


11:30 AM - 1:30 PM

$63.00

Speaker: Vistasp M. Karbhari
Title: Fiber Reinforced Composites – Designer Materials for the Future of Infrastructure
Fiber reinforced composites provide the civil engineer with a palette of options not available with traditional materials due to their light weight, high specific performance attributes, local and global tailorability, ease of placement in the field and relatively high durability. They can be used in applications ranging from the rehabilitation of deteriorating and understrength steel and structural concrete components to the development of new structural systems that can be multifunctional and can integrate form and function far easier than traditional structures. Their tailorability enables the designer to effectively optimize materials and structural systems and could enable the rapid deployment of large scale intelligent structural systems in the future.
All are welcome to register for the lunch. Following the lecture, the results of the student competition will be announced. For additional information on the Student Lunch, please visit www.aciconvention.org.


1:30 PM - 3:30 PM

Moderator: Maria S Konsta

This session will highlight recent research on nanoscale and microscale interaction mechanisms at the interfaces between the cementitious hydration products and nanomaterials; methods to characterize, control and strengthen these interactions; quantitative analysis of the interfaces and nanoscale texture of interfacial transition zone; and the link between atomic interactions, interfaces, and bulk concrete properties.

Learning Objectives:
(1) Discuss the methods for characterizing interfaces at the nanoscale to enhance understanding of concrete properties;
(2) Identify characteristics of the Interfacial Transition Zone at the nano and microscale;
(3) Define the importance of interfacial chemistry in strength and durability;
(4) Recognize the mechanical and fracture properties of the nanofiber-matrix interfaces in concrete.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


1:30 PM - 3:30 PM

Moderator: James H Hanson

You learned the basics of concrete design in your introductory course in college. Now take home some additional design skills you probably did not see there. Audience is senior undergraduates, graduate students, young professionals, practitioners looking for continuing education.
Learning Objectives:
(1) Identify relevant ACI documents to address structural design problems;
(2) Apply relevant ACI documents to address structural design problems;
(3) Recognize resources at ACI headquarters to help with design questions;
(4) Identify relevant ACI technical committees related to a structural design problem.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


1:30 PM - 3:30 PM

Moderator: Yail Jimmy Kim

Korea Concrete Institute
Taiwan Concrete Institute
International Federation for Structural Concrete
The special sessions present recent advances in the design, construction, evaluation, and repair of concrete structures and materials with an emphasis on international perspectives with members from four major concrete institutes around the globe: the American Concrete Institute (ACI), Korea Concrete Institute (KCI), Taiwan Concrete Institute (TCI), and International Federation for Structural Concrete (FIB). Presentations encompass a variety of technical aspects such as the refined analysis and assessment techniques of concrete members, damage detection and mitigation, seismic behavior, durability performance, and repair/strengthening of constructed structures. Both experimental and analytical investigations are of interest. The sessions bring to light state-of-the-art knowledge and provide an opportunity to discuss current challenges and technical demands. Critical information will be provided to those who lead tomorrow’s structural design, construction, evaluation, and repair, including practicing engineers, government officials, and academics.
Learning Objectives:
(1) Discuss the performance of concrete structures under aggressing loadings;
(2) Report the recent advances in research concerning concrete materials and structures;
(3) Recognize a new direction for the design of concrete members;
(4) Relate how research outcomes are translated into practice.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


1:30 PM - 3:30 PM

Moderator: Shahria Alam

The evolution of the seismic design provisions in response to the lessons learned from previous earthquake events has led to the development of new design methodologies such as performance-based design (PBD). A key component of PBD is to lay out the engineering demand parameters identifying the initiation of different damage states (e.g., yielding, spalling, bar fracture, etc.). In this regard, reliable knowledge of structural members’ strength and deformation capacities is required, and it is often obtained through quasi-static cyclic testing programs. The selecting of an appropriate loading protocol is crucial in these programs to achieve.
Learning Objectives:
(1) Summarize existing research and standards on deformation limits and acceptance criteria for different performance levels of reinforced concrete elements and connections;
(2) Compare performance of different structural components tested under different types of quasi-static cyclic loading;
(3) Discuss relationship between quasi-static loading protocols and seismic response and collapse behavior of reinforced concrete columns;
(4) Analyze behavior of dampers using experimental data from real-time hybrid simulations to develop new models using machine learning techniques.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


3:30 PM - 4:30 PM

Moderators: James R Baty, Kerry E Sutton

Development of new standards is an important part of the ACI mission. Representatives from committees ACI 440 and ACI/TMS 122, will provide a brief overview of their newest documents ACI CODE 440.11-22 and ACI/TMS CODE 122.1-21, challenges in developing the standard; most importantly, why it is needed; where it is intended to be adopted and/or referenced; and future plans to advane this code and other committee activities.
Learning Objectives:
(1) Identify the basis for the new ACI Codes 440.11 and ACI/TMS 122.1;
(2) Recognize the challenges in developing the standards;
(3) Explain where they are intended to be adopted and/or referenced;
(4) Indentify future plans and possible assistance needed to advance the codes.

This session has been AIA/ICC approved for 1 CEU/PDH credit.


4:00 PM - 6:00 PM

Moderator: Yail Jimmy Kim

Korea Concrete Institute
Taiwan Concrete Institute
International Federation for Structural Concrete
The special sessions present recent advances in the design, construction, evaluation, and repair of concrete structures and materials with an emphasis on international perspectives with members from four major concrete institutes around the globe: the American Concrete Institute (ACI), Korea Concrete Institute (KCI), Taiwan Concrete Institute (TCI), and International Federation for Structural Concrete (FIB). Presentations encompass a variety of technical aspects such as the refined analysis and assessment techniques of concrete members, damage detection and mitigation, seismic behavior, durability performance, and repair/strengthening of constructed structures. Both experimental and analytical investigations are of interest. The sessions bring to light state-of-the-art knowledge and provide an opportunity to discuss current challenges and technical demands. Critical information will be provided to those who lead tomorrow’s structural design, construction, evaluation, and repair, including practicing engineers, government officials, and academics.
Learning Objectives:
(1) Discuss the state-of-the-art of sustainable concrete structures;
(2) Identify research needs to advance the knowledge associated with constructed concrete elements;
(3) Recognize the effort to establish a new trend in concrete durability;
(4) Compare laboratory investigations with practical applications.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


4:00 PM - 6:00 PM

Moderators: Kurt D Smith, Shiraz D Tayabji

The use of concrete for roundabouts in the USA is increasing. Jointed concrete pavements (JCP) are widely used in mid-western States in the USA. Texas has constructed several continuously reinforced concrete pavement (CRCP) roundabouts and Virginia has constructed one precast concrete pavement (PCP) roundabout. Recently, the Federal Highway Administration sponsored the development of technical guidelines for design and construction of JCP, CRCP, and PCP roundabouts. This session will present the technical guidelines and experience from actual concrete roundabout projects. The session attendees would include agency staff, design engineers, contractors, and ready-mix suppliers. The attendees will have a good understanding of design and construction of concrete roundabouts.
Learning Objectives:
(1) Identify critical aspects of jointed concrete pavement (JCP) design and construction for roundabout intersections;
(2) List prominent JCP roundabout intersections and describe their peformance;
(3) Describe the features and characteristics of the continuously reinforced concrete pavement (CRCP) roundabout intersections in Texas;
(4) Describe the applicability of precast concrete pavements in roundabout intersections.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


4:00 PM - 6:00 PM

Moderator: Ali Abu-Yosef

Given the increased use of non-traditional materials in the construction and repair of bridges and bridge elements, there is an increased need to develop reliable destructive and non-destructive evaluation methods and techniques to assess their in-service performance. Examples of non-traditional materials include, but are not limited to, fiber-reinforced polymer reinforcement, and ultra-high performance concrete materials. This session will bring to light industry experience in the evaluation techniques and discuss the challenges associated with the assessment of non-traditional materials and current field results. The session will aim to share field experiences and critical information to those involved in the design, evaluation, and inspection of bridges.
Learning Objectives:
(1) Evaluate the reliability of nondestructive testing methods in evaluating performance of non-traditional overlay and reinforcement materials;
(2) Recognize challenges associated with the assessment of non-traditional materials while in service;
(3) Discuss long term performance of non-traditional overlay materials;
(4) Discuss long term performance of non-traditional reinforcement used in concrete bridges.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


4:00 PM - 6:00 PM

Moderator: Shahria Alam

The evolution of the seismic design provisions in response to the lessons learned from previous earthquake events has led to the development of new design methodologies such as performance-based design (PBD). A key component of PBD is to lay out the engineering demand parameters identifying the initiation of different damage states (e.g., yielding, spalling, bar fracture, etc.). In this regard, reliable knowledge of structural members’ strength and deformation capacities is required, and it is often obtained through quasi-static cyclic testing programs. The selecting of an appropriate loading protocol is crucial in these programs to achieve.
Learning Objectives:
(1) New approaches for the selection of ground motion for experimental tests;
(2) Performance of reinforced concrete structural walls tested under different types of quasi-static cyclic and dynamic loading;
(3) Imposed loading protocols versus damage states and performance criteria for RC structural walls considering uni- and bi-directional loading;
(4) Performance of concrete truss girder connection reinforced with steel or FRP double-headed bars tested under quasi-static cyclic loading.

This session has been AIA/ICC approved for 2 CEU/PDH credits.


5:00 PM - 6:00 PM

Everyone is invited to attend this reception/networking event sponsored by the Women in ACI. It is time for all of us to reconnect face to face, and if you enjoyed our virtual reception, you are sure to be enamored with this in-person networking event. During this reception, the Women in ACI will introduce the winners of the Young Professional Convention Sponsorship, recognize women who have made significant contributions to the industry, and share the history of the Women in ACI. Ice breaker games will provide attendees with the opportunity for fellowship and fun. Plus, you might go home with one of our concrete prizes. This event has a long history at ACI and has grown from a small gathering of women attendees to an event attended by all convention demographics. Attendees will have the opportunity to participate in the Concrete Art Auction Sponsored by Women in ACI. Proceeds from the auction benefit young professionals by providing them with a paid convention registration. Please come join the Women in ACI and support young professionals!
* Please note - the Hyatt Regency Dallas is a cash-free hotel and will only accept credit/debit cards at the cash bar.


6:00 PM - 10:00 PM

$125.00

$125 USD per person
Doors open/Cocktail Reception: 6:00 pm – 7:00 pm
Dinner: 7:00 pm – 8:00 pm
Awards Presentation: 8:00 pm – 9:00 pm
Post-Reception/Red-Carpet Photographs: 9:00 – 10:00 pm

The ACI Excellence in Concrete Construction Awards will showcase and honor some of the most creative concrete projects from around the world nominated by ACI Chapters, ACI International Partners, and new for this year, project team members. Project nominations were judged by industry professionals with technical expertise in each of the seven award categories. First- and second-place awards will be announced in each category, in addition to the concluding overall “Excellence” Award. Following the Awards, celebrate the accomplishments of those recognized at the red-carpet post-reception. A cash bar will be available.
* Please note - the Hyatt Regency Dallas is a cash-free hotel and will only accept credit/debit cards at the cash bar.


6:30 PM - 8:30 PM

Moderators: Robert Thomas, Eric R Giannini

Several key concrete industry organizations have committed to achieving carbon neutrality in the coming decades. ACI established its Center of Excellence for Carbon Neutral Concrete in early 2022. The Portland Cement Association (PCA) released its Roadmap to Carbon Neutrality in late 2021. Advancement and adoption of emerging technologies like direct carbon capture are a step in the right direction, but achieving this lofty goal will also require changes to design codes, standards and specifications. How to implement these changes is a matter of ongoing debate. Codes and standards will also need to change to accommodate nontraditional materials like alternative cements, supplementary cementitious materials, nonmetallic reinforcement, and other emerging technologies that can reduce the carbon footprint of the concrete but are not always compatible with current specifications. This forum will address the strengths and weaknesses of current design codes, standards, and specifications with respect to industry goals for carbon neutraility, and identify opportunities to improve these critical documents to better support the industry's ongoing effort to decarbonize concrete.

A panel of industry experts will discuss the topic from varying perspectives. The session will begin with short presentations by each panelist and conclude with an interactive panel discussion with the audience.

Learning Objectives:
(1) Describe prominent industry efforts to decarbonize concrete;
(2) Give examples of emerging technologies to support carbon-neutral concrete;
(3) Explain the strengths and weaknesses of current codes, standards, and specifications with respect to low carbon concrete;
(4) Identify necessary changes to these documents to support carbon neutrality.

This session has been AIA/ICC approved for 2 CEU/PDH credits.



Upper Level Sponsors

Ash Grove
Baker
Conseal
Controls Group
Euclid Chemical
GCP
Master Builders
PoreShield
PS=0
ACI Northeast Texas Chapter

Please enter this 5 digit unlock code on the web page.