Description

This publication contains the ASTM standards that are cited and referenced in "Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary." There are 58 ASTM standards included in this publication. The cost of purchasing these standards individually from ASTM is over $2200 - purchase SP-71 from ACI and save thousands; plus, enjoy the convenience of having all ASTM standards in one easy-to-use publication.

Document Details

Publication Year: 2008

Pages: 350

ISBN: 9780870313103

Categories: Design

Table of Contents

Page ASTM Standard Designation

1 A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

5 A184/A184M-06 Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

8 A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

14 A242/A242M-04ε1 Standard Specification for High-Strength Low-Alloy Structural Steel

17 A307-07a Standard Specification for Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength

22 A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

27 A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

31 A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

37 A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

42 A500/A500M-07 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

47 A501-07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

55 A572/A572M-07 Standard Specification for High-Strength Low-Alloy Columbium- Vanadium Structural Steel

59 A588/A588M-05 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

62 A615/A615M-07 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

68 A706/A706M-06a Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

74 A722/A722M-07 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

79 A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

83 A775/A775M-07a Standard Specification for Epoxy-Coated Steel Reinforcing Bars

93 A820/A820M-06 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

97 A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

103 A934/A934M-07 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

119 A955/A955M-07a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

130 A970/A970M-06 Standard Specification for Headed Steel Bars for Concrete Reinforcement

138 A992/A992M-06a Standard Specification for Structural Steel Shapes

141 A996/A996M-06a Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

146 A1022/A1022M-07 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

155 A1035/A1035M-07 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

160 A1044/A1044M-05 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

165 C29/C29M-97(2003) Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

169 C31/C31M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Field

175 C33-03 Standard Specification for Concrete Aggregates

186 C39/C39M-05ε1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

193 C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

199 C94/C94M-06 Standard Specification for Ready-Mixed Concrete

210 C109/C109M-05 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

219 C144-04 Standard Specification for Aggregate for Masonry Mortar

221 C150-05 Standard Specification for Portland Cement

229 C172-04 Standard Practice for Sampling Freshly Mixed Concrete

232 C192/C192M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

240 C231-04 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

249 C260-06 Standard Specification for Air-Entraining Admixtures for Concrete

252 C330-05 Standard Specification for Lightweight Aggregates for Structural Concrete

256 C494/C494M-05a Standard Specification for Chemical Admixtures for Concrete

266 C496/C496M-04 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

271 C567-05a Standard Test Method for Determining Density of Structural Lightweight Concrete

274 C595-07 Standard Specification for Blended Hydraulic Cements

281 C618-05 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

284 C685/C685M-01 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

293 C845-04 Standard Specification for Expansive Hydraulic Cement

296 C989-06 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars

301 C1012-04 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

307 C1017/C1017M-03 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

316 C1116/C1116M-06 Standard Specification for Fiber-Reinforced Concrete

323 C1157-03 Standard Performance Specification for Hydraulic Cement

329 C1218/C1218M-99 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

332 C1240-05 Standard Specification for Silica Fume Used in Cementitious Mixtures

339 C1602/C1602M-06 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

343 C1609/C1609M-06 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading)

ERRATA INFO

Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).