349.2R-07 Guide to the Concrete Capacity Design (CCD) Method - Embedment Design Examples (Reapproved 2014)

349.2R-07 Guide to the Concrete Capacity Design (CCD) Method - Embedment Design Examples (Reapproved 2014)

Your Price: $94.50 USD

Member Price: $56.00 USD

Save $38.50 USD, Become a Member

Choose Product Language

Choose Product Format


Click here to preview


ACI 349 Appendix B was developed in the mid 1970s following review of design methods and available test data. Since that time there has been extensive additional test data. In 1992, a task group was formed to compare the Appendix B methodology to that of the Concrete Capacity Design (CCD) Method for all available tests results. The review indicated that concrete breakout failures were predicted better (for example, for bolt groups, and edge conditions) by the new prediction equations in the Concrete Capacity Design Method than by the design method of Appendix B. After extensive review, ACI 349 chose to incorporate the Concrete Capacity Design Method to improve the requirements of the previous Appendix B.

Therefore, Appendix D of ACI 349 was developed to better define the design requirements for steel embedments. Revisions are periodically made to the code as a result of on-going research and testing. As with other concrete building codes, the design of steel embedments attempts to assure a ductile failure mode so that the embedment reinforcement yields before the concrete fails. In embedments designed for direct [or tensile] loading, the concrete pullout strength must be greater than the tensile strength of the steel. This report presents a series of design examples of ductile steel embedments. These examples have been updated to include the revision incorporated in Appendix D of ACI 349-06.

Keywords: Anchorage (structural); anchor bolts; anchors (fasteners); concrete capacity design (CCD); embedment; inserts; load transfer; studs.

Document Details

Author: ACI Committee 349

Publication Year: 2007

Pages: 91.00

ISBN: 9780870312632

Categories: Anchors, Nuclear

Formats: PDF

Table of Contents




PART A—Examples: Ductile single embedded element in semi-infinite concrete

Example A1—Single stud, tension only, no edge effects

Example A2—Single stud, shear only

Example A3—Single stud, combined tension and shear

Example A4—Single bolt, combined tension and shear

PART B—Examples: Ductile multiple embedded elements in semi-infinite concrete

Example B1(a)—Four-stud embedded plate, tension only, wide spacing

Example B1(b)—Four-stud embedded plate, tension only, close spacing

Example B1(c)—Four-bolt surface-mounted plate, tension only, close spacing, close to a corner

Example B2(a)—Four-stud embedded plate, combined shear and uniaxial moment

Example B2(b)—Four-anchor surface-mounted plate, combined shear and uniaxial moment

Example B3—Four-threaded anchors and surfacemounted plate, combined axial, shear, and moment

Example B4(a)—Four-stud embedded plate in thin slab, tension only

Example B4(b)—Four-stud rigid embedded plate in thin slab, tension only


Table 1—Materials for headed and threaded anchors

Table 2—Threaded fastener dimensions

Table 3—Required embedment for ductile behavior: free field, single anchor

Table 4—Anchor head and nut dimensions

Table 5—Hardened washer dimensions

Table 6—Stud dimensions

APPENDIX B—ACI 349, Appendix D, Code and Commentary


Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the Manual of Concrete Practice (MCP). For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).