117-06 Specifications for Tolerances for Concrete Construction and Materials and Commentary

117-06 Specifications for Tolerances for Concrete Construction and Materials and Commentary

Currency Display

Your Price: $ 81.50 USD

Member Price: $ 49.00 USD

Save $ 32.50 USD, Become a Member

Choose Product Language

Choose Product Units


Choose Product Format


Notes/Preview

**A newer version of this document exists**

NEW VERSION

 

Description

This specification provides standard tolerances for concrete construction. This document is intended to be used as the reference document for establishing tolerances for concrete construction by specification writers and ACI committees writing standards. The commentary on the Specifications for Tolerances for Concrete Construction and Materials (ACI 117) is intended to be used with ACI 117 for clarity of interpretation and insight into the intent of the committee regarding the application of the tolerances set forth therein.

Keywords: construction; concrete; drilled piers; formwork; foundation; masonry; mass concrete; pier; precast concrete; prestressed concrete; reinforced concrete; reinforcement; specification; splice; tolerances.

 

Document Details

Author: ACI Committee 117

Publication Year: 2006

Pages: 70.00

ISBN: 9780870312212

Categories: Tolerances

Formats: PDF

This document is Historical

Table of Contents

Preface

Introduction

Section 1—General requirements

1.1—Scope

1.2—Requirements

1.3—Definitions

1.4—Referenced standards

Section 2—Materials

2.1—Reinforcing steel fabrication

2.2—Reinforcement location

2.3—Placement of embedded items, excluding dowels in slabs-on-ground

2.4—Concrete batching

2.5—Concrete properties

Section 3—Foundations

3.1—Deviation from plumb

3.2—Deviation from location

3.3—Deviation from elevation

3.4—Deviation from plane

3.5—Deviation from cross-sectional dimensions of foundations

Section 4—Cast-in-place concrete for buildings

4.1—Deviation from plumb

4.2—Deviation from location

4.3—Distance between adjacent elements sectioned by a

vertical plane

4.4—Deviation from elevation

4.5—Deviation from cross-sectional dimensions

4.6—Deviation from sawcut depth or formed opening width or height

4.7—Deviation from relative elevations or widths

4.8—Deviation from slope or plane

Section 5—Precast concrete

This section has been removed.

Section 6—Masonry

This section has been removed.

Section 7—Cast-in-place, vertically slipformed building elements

7.1—Deviation from plumb for buildings and cores

7.2—Horizontal deviation

7.3—Cross-sectional dimensions

7.4—Openings through elements

7.5—Embedded plates

7.6—Deviation from plumb for slipformed and jumpformed silos

Section 8—Mass concrete structures other than building elements

8.1—Deviation from plumb

8.2—Horizontal deviation

8.3—Vertical deviation

8.4—Cross-sectional dimension

8.5—Deviation from plane

Section 9—Canal lining

9.1—Horizontal deviation

9.2—Vertical deviation

9.3—Cross-sectional dimensions

Section 10—Monolithic water-conveying tunnels, siphons, conduits, and spillways

10.1—Horizontal deviation

10.2—Vertical deviation

10.3—Cross-sectional dimensions

10.4—Deviation from plane

Section 11—Cast-in-place bridges

11.1—Deviation from plumb

11.2—Horizontal deviation

11.3—Vertical deviation

11.4—Length, width, or depth of specified elements

11.5—Deviation from plane

11.6—Deck reinforcement cover

11.7—Bearing pads

Section 12—Pavements and sidewalks

12.1—Horizontal deviation

12.2—Vertical deviation of surface

Section 13—Chimneys and cooling towers

13.1—Deviation from plumb

13.2—Outside shell diameter

13.3—Wall thickness

Section 14—Cast-in-place nonreinforced pipe

14.1—Wall thickness

14.2—Pipe diameter

14.3—Offsets

14.4—Surface indentations

14.5—Grade and alignment

14.6—Concrete slump

Foreword to checklists

Mandatory requirements checklist

Optional requirements checklist

ERRATA INFO

Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).