Title: Combined use of UHPC and High-Performance Steel to Improve the Blast Performance of Columns with Square Cross-section

Author(s): Sarah De Carufel and Hassan Aoude

Publication: Symposium Paper

Volume: 341

Issue:

Appears on pages(s): 27-47

Keywords: UHPC, High-strength steel, Stainless steel, Columns, Blast, Shock Tube

DOI: 10.14359/51727023

Date: 6/30/2020

Abstract:
This paper presents the results from tests examining the blast performance of columns constructed with ultra-high-performance concrete (UHPC) and high-performance reinforcement (high-strength steel or stainless steel). As part of the study six columns with square cross-sections were tested under simulated blast loads using a shock-tube at the University of Ottawa. Parameters investigated include the effects of concrete type, longitudinal reinforcement type and longitudinal reinforcement ratio. The results demonstrate that the use of UHPC increases the blast performance of reinforced concrete columns by increasing blast capacity and improving control of maximum and residual mid-span displacements by an average of 30% and 40%. Substitution of normal-strength bars with high-strength or stainless steel bars in the UHPC columns resulted in further reductions in displacements, which ranged between 18-43% for maximum deformations and 38-66% for residual deformations. The failure mode of all columns with low steel ratio of 1.24% (4 – No.3 bars) was tension bar rupture, regardless of steel type. Increasing the steel ratio from 1.24% to 1.84% (6 –No.3 bars) increased blast capacity and delayed failure. The use of increased amount of stainless steel bars was particularly effective, and transformed the failure mode from bar rupture to fiber pullout. The analytical study confirms that dynamic inelastic SDOF analysis can be used to reasonably predict the blast response of UHPC columns reinforced with varying steel types.