Large Amplitude Oscillatory Shear Protocol Applied to Cement-Based Materials

International Concrete Abstracts Portal

The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

  


Title: Large Amplitude Oscillatory Shear Protocol Applied to Cement-Based Materials

Author(s): Théau Conte and Mohend Chaouche

Publication: Symposium Paper

Volume: 320

Issue:

Appears on pages(s): 42.1-42.18

Keywords: Large Amplitude Oscillatory shear (LAOS), cement pastes, thixotropy, aging.

DOI: 10.14359/51701080

Date: 8/1/2017

Abstract:
Cement pastes exhibit virtually all the rheological features of complex fluids. Thus, several rheological methods and setups have been used in the literature to characterize these materials. In the present investigation Large Amplitude Oscillatory Shear (LAOS) is for the first time exploited for cement pastes. LAOS can be used to characterize all the rheological properties within a single procedure. This technique is tested in the case of three different cement mixes: a Portland cement paste, nanoclay blended cement paste and a cement paste containing a hydro-soluble polymer. These mixes were selected in order to get rheological properties that are different both quantitatively and qualitatively. Indeed, addition of a low amount of nanoclay increased significantly the yield stress and the shear-thinning/thixotropic aspects of the cement paste, whereas addition of cellulose ether led to the decrease of yield stress and thixotropy. These non-linear rheological properties are discussed within the framework of LAOS.

Related References:

1. M.A. Schultz, L.J. Struble, Use of oscillatory shear to study flow behavior of fresh cementpaste, Cement and Concrete Research. 23 (1993) 273–282.

2. O.H. Wallevik, J.E. Wallevik, Rheology as a tool in concrete science: The use of rheographsand workability boxes, Cement and Concrete Research. 41 (2011) 1279–1288.

3. K.H. Khayat, Viscosity-Enhancing Admixtures for Cement-Based Materials - An Overview, Cement and Concrete Composites. 20 (1998) 171–188.

4. N. Roussel, G. Ovarlez, S. Garrault, C. Brumaud, The origins of thixotropy of fresh cementpastes, Cement and Concrete Research. 42 (2012) 148–157.

5. F.A. Cardoso, V.M. John, R.G. Pileggi, P.F.G. Banfill, Characterisation of rendering mortars by squeeze-flow and rotational rheometry, Cement and Concrete Research. 57 (2014) 79–87.

6. F.A. Cardoso, A.L. Fujii, R.G. Pileggi, M. Chaouche, Parallel-plate rotational rheometry ofcement paste: Influence of the squeeze velocity during gap positioning, Cement and ConcreteResearch. 75 (2015) 66–74.

7. O.H. Wallevik, D. Feys, J.E. Wallevik, K.H. Khayat, Avoiding inaccurate interpretations ofrheological measurements for cement-based materials, Cement and Concrete Research. 78(2015) 100–109.

8. A. Saak, S.P. Shah, The influence of wall slip on yield stress and viscoelastic measurementsof cement paste, Cement and Concrete Research. 31 (2001) 205–212.

9. P.C.F. Møller, J. Mewis, D. Bonn, Yield stress and thixotropy: on the difficulty of measuringyield stresses in practice, Soft Matter. 2 (2006) 274.

10. S. Kawashima, M. Chaouche, D.J. Corr, S.P. Shah, Rate of thixotropic rebuilding of cementpastes modified with highly purified attapulgite clays, Cement and Concrete Research. 53(2013) 112–118.

11. A. Kaci, M. Chaouche, P.-A. Andréani, Influence of bentonite clay on the rheologicalbehaviour of fresh mortars, Cement and Concrete Research. 41 (2011) 373–379.

12. R.H. Ewoldt, A.E. Hosoi, G.H. Mckinley, New measures for characterizing nonlinearviscoelasticity in large amplitude oscillatory shear, J. Rheol. 52 (2008) 1427.

13. S.A. Rogers, B.M. Erwin, D. Vlassopoulos, M. Cloitre, A sequence of physical processesdetermined and quantified in LAOS: Application to a yield stress fluid, J. Rheol. 55 (2011)435.

14. C.J. Dimitriou, R.H. Ewoldt, G.H. Mckinley, Describing and prescribing the constitutiveresponse of yield stress fluids using large amplitude oscillatory shear stress (LAOStress), J.Rheol. 57 (2013) 27.

15. K. Hyun, M. Wilhelm, C.O. Klein, K.S. Cho, J.G. Nam, K.H. Ahn, et al., Progress inPolymer Science, Progress in Polymer Science. 36 (2011) 1697–1753.

16. R.H. Ewoldt, P. Winter, J. Maxey, G.H. Mckinley, Large amplitude oscillatory shear ofpseudoplastic and elastoviscoplastic materials, Cambridge, MA, Self-Published. (2009) 1–46.

17. M. Cappellari, A. Daubresse, M. Chaouche, Influence of organic thickening admixtures onthe rheological properties of mortars: Relationship with water-retention, Construction and Building Materials. 38 (2013) 950–961.

18. R.H. Ewoldt, Defining nonlinear rheological material functions for oscillatory shear, J.Rheol. 57 (2013) 177–195.

19. J. Läuger, H. Stettin, Differences between stress and strain control in the non-linear behaviorof complex fluids, Rheol Acta. 49 (2010) 909–930.

20. S. Kawashima, P. Hou, D.J. Corr, S.P. Shah, Modification of cement-based materials withnanoparticles, Cement and Concrete Composites. 36 (2013) 8–15.

21. P. Coussot, Q.D. Nguyen, H.T. Huynh, D. Bonn, Avalanche Behavior in Yield Stress Fluids,Phys. Rev. Lett. 88 (2002) 175501.