Title: Effect of Secondary Cracks for Cracking Analysis of Reinforced Concrete Tie

Author(s): Pier Giorgio Debernardi, Matteo Guiglia, and Maurizio Taliano

Publication: Materials Journal

Volume: 110

Issue: 2

Appears on pages(s): 207-214

Keywords: bond stress; crack width and spacing; cracking; reinforced concrete.

DOI: 10.14359/51685535

Date: 3/1/2013

Abstract:
To obtain adequate serviceability and good durability of structures, international standards limit the crack width either through a direct calculation or by adopting specific measures. However, cracking behavior is very complex because of the large number of parameters that can have a significant effect on it. This complexity is also confirmed by the high scattering of the test results or by the several formulas that are adopted to theoretically govern the phenomenon. The cracking behavior of reinforced concrete (RC) structures under bending, with or without axial forces, can be described with a model based on the bond stress-slip relationship, t-s, between concrete and steel. A model of this type based on the bond law proposed by CEB-FIP Model Code 1990 was developed in the literature to predict the mechanical behavior of an RC tie subjected to monotonic loading, both in the crack formation phase and the stabilized cracking phase. However, the adoption of the bond stress-slip relationship as it is fails to comply with the equilibrium condition and contradicts the experimental condition of the fixed crack pattern. These inconsistencies can be overcome considering the effect of the so-called Goto cracks or secondary cracks, which leads to a decreasing trend of the bond stresses around the crack. The effect of secondary cracks on the cracking behavior of an RC tie in the stabilized cracking phase is also analyzed through a parametric analysis, which highlights how and to what extent their influence zone varies as a function of the axial force, the concrete strength, the reinforcement ratio, and the bar diameter.