ABOUT THE INTERNATIONAL CONCRETE ABSTRACTS PORTAL

  • The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

International Concrete Abstracts Portal

  


Title: Alternative Design Procedures for Torsion in ACI 318-19: A Comparative Study

Author(s): Allan Kuan, Edvard P.G. Bruun, Evan C. Bentz, and Michael P. Collins

Publication: Symposium Paper

Volume: 344

Issue:

Appears on pages(s): 64-91

Keywords: reinforced concrete; prestressed concrete; torsion; design codes; shear; moment

Date: 10/1/2020

Abstract:
Although the torsion design procedures in ACI 318-19 are simple and broadly applicable, the resulting designs tend to be conservative. To address this, clause 9.5.4.6 in ACI 318-19 permits the use of an alternative design procedure when designing members with an aspect ratio ≥ 3 for torsion, provided that the alternative procedure has been shown to agree with the results of comprehensive tests. This paper evaluates and compares the torsion design procedures in CSA A23.3:19 and the PCI Design Handbook 8th edition with those in ACI 318-19. Each of the three methods are found to show good agreement with 282 tests found in the literature. A comparison of the three concludes that the designs obtained using the ACI method generally require the most reinforcement. More economical designs for members subjected to relatively low and high torques can be obtained by using the PCI and CSA methods respectively. A design example of a spandrel beam using the three methods is presented, and then further conclusions are stated to guide practicing engineers on the relative strengths and weaknesses of each procedure.




  

Please enter this 5 digit unlock code on the web page.