• The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

International Concrete Abstracts Portal


Title: High Pressure Steam Curing of Reactive-Powder Mortars

Author(s): L. Massidda, U. Sanna, E. Cocco, and P. Meloni

Publication: Symposium Paper

Volume: 200


Appears on pages(s): 447-464

Keywords: fibre-reinforced systems; mechanical properties; porosi-ty; reactive powder concrete; steam curing

DOI: 10.14359/10594

Date: 6/1/2001

We have studied the effects of autoclaving under saturated vapour at 18OOC on the physical and mechanical properties of reactive-powder mor-tars reinforced with brass coated steel fibres. The system consisted of portland cement (ASTM Type V), silica fume, natural silica sand (maximum grain size <1 mm) an acrylic super-plasticizer, and brass coated steel fibres (L= 13mm, 0= O.l8nm); a water-to-cement of 0.255 was used to obtain a flowable sys-tem. Specimens were subjected to high pressure steam curing for 3 hours after preliminary curing at normal temperatures and for different times. Samples pre-cured at normal temperature for 24 hours and 3 days were autoclaved for up to 12 hours. Autoclaving generally produced beneficial effects on the mechanical properties both in terms of flexural and compression strength. High pressure steam curing for 3 hours of specimens pre-cured at ambient temperature for 3 days yielded flexural strength of 30 MPa and compression strength of 200 MPa. The strengthening mechanisms depend only in part on the greater degree of hydration as the hydrated phases that form in the systems prepared with low w/c are highly impermeable. The main effect appears to be the result of modifications to the microstructure that manifests itself as a reduction in porosity and hence in better mechanical properties.