Title:
Suggested Modifications to ASTM C31/C31M for Consolidation by Rodding
Author(s):
Paige Toebben, Kyle Riding, Ahmed Abd El Fattah, and Dimitri Feys
Publication:
Materials Journal
Volume:
122
Issue:
6
Appears on pages(s):
47-58
Keywords:
ASTM C31/C31M; compressive strength; consolidation; density; field specimens; rodding
DOI:
10.14359/51749124
Date:
11/1/2025
Abstract:
ASTM C31/C31M describes the procedure of making concrete specimens in the field. Its origin can be traced to 1920, proposing rodding or stroking each 100 mm thick layer 25 to 30 times. Concrete technology has evolved tremendously over the last century, but specimens are still prepared following this 100-year-old methodology. This paper investigates the density and compressive strength of concrete cylinders for different consolidation procedures. Mixture design variations include paste volume, water-cement ratio (w/c), aggregate grain size distribution, fly ash, and water-reducing agent. An increase in compressive strength of approximately 5 MPa can be obtained if 100 x 200 mm cylinders are rodded in four layers, 25 rods each, if the slump is not over 100 mm. For all other mixtures, the current rodding procedure of two layers, 25 rods each, is recommended. For mixtures with higher slump, two layers with less rodding per layer deliver similar strength values, but the variability is high.
Related References:
1. ASTM International, “Proceedings of the American Society for Testing Materials, Twentieth Annual Meeting, Vol. XVII, Part I,” ASTM International, West Conshohocken, PA, 1917.
2. ASTM International, “Proceedings of the American Society for Testing Materials, Twenty-Third Annual Meeting, Vol. XX, Part I,” ASTM International, West Conshohocken, PA, 1920.
3. ASTM C31/C31M-23, “Standard Practice for Making and Curing Concrete Test Specimens in the Field,” ASTM International, West Conshohocken, PA, 2023, 7 pp.
4. ASTM C1176/C1176M-20, “Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table,” ASTM International, West Conshohocken, PA, 2020, 5 pp.
5. ASTM C1435/C1435M-20, “Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer,” ASTM International, West Conshohocken, PA, 2020, 5 pp.
6. ASTM C1800/C1800M-16, “Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor,” ASTM International, West Conshohocken, PA, 2016.
7. ASTM C1758/C1758M-23, “Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete,” ASTM International, West Conshohocken, PA, 2023, 2 pp.
8. Mikanovic, N.; Leclerc, A.; Ponge, A.; and Khayat, K., “Workability Characteristics and Performance Criteria for Design and Control of Super Workable Concrete,” Design, Production and Placement of Self-Consolidating Concrete, Montreal, QC, Canada, 2010.
9. American Concrete Institute, “ACI CT-23: ACI Concrete Terminology,” American Concrete Institute, Farmington Hills, MI, 2023.
10. Neville, A., Properties of Concrete, fifth edition, Pearson, 2011.
11. Walker, H., “Petrographic Methods of Examining Hardened Concrete: A Petrographic Manual,” Federal Highway Administration, Washington, DC, 1997.
12. Ojala, T.; Ahmed, H.; Vehmas, T.; Chen, Y.; Tauqir, A.; Oey, T.; Al-Neshawy, F.; Leivo, M.; and Punkki, J., “Factors for Compatibility and Risk of Segregation for Concrete - Report for Contract Research Project ‘Compact Air’,” Aalto University, Espoo, Finland, 2021.
13. Ling, Y., and Taylor, P., “Effect of Controlled Vibration Dynamics on Concrete Mixtures,” ACI Materials Journal, V. 118, No. 5, Sept. 2021, pp. 161-172.
14. Banfill, P.; Yongmo, X.; and Domone, P., “Relationship between the Rheology of Unvibrated Fresh Concrete and Its Flow under Vibration in a Vertical Pipe Apparatus,” Magazine of Concrete Research, V. 51, No. 3, 1999, pp. 181-190.
15. Hou, Z.; Yuan, Y.; Yuan, Z.; Liang, Y.; and Zhou, Z., “Study on Vibrational Liquefaction Behavior of Air-Entrained Concrete,” Advanced Materials Research, V. 857, 2014, pp. 20-26.
16. Kisaku, T.; Yoshida, Y.; Muto, K.; Kurosawa, T.; Ito, Y.; and Fujiyama, C., “Prediction of Effective Vibration Condition under Air Void Reduction Using Mortar Rheological Constant,” Engineering Reports, V. 4, No. 9, 2022, p. e12484.
17. Hanotin, C.; Kiesgen de Richter, S.; Michot, L.; and Marchal, P., “Viscoelasticity of Vibrated Granular Suspensions,” Journal of Rheology, V. 59, No. 1, 2015, pp. 253-273.
18. Sooryanarayana, K.; Hawkins, K.; Stynoski, P.; and Lange, D., “Controlling Three-Dimensional-Printable Concrete with Vibration,” ACI Materials Journal, V. 118, No. 6, Nov. 2021, pp. 353-358.
19. Pattaje Sooryanarayana, K., “Effect of Vibration on Rheological Properties of Concrete and Its Application in Concrete 3D Printing,” PhD dissertation, University of Illinois Urbana-Champaign, Urbana, IL, 2023.
20. Tattersall, G. H., and Banfill, P., The Rheology of Fresh Concrete, Pitman, London, UK, 1983.
21. Roussel, N., Understanding the Rheology of Concrete, Woodhead Publishing Ltd., Cambridge, UK, 2012.
22. Bahmer, V., “Vibrotekniska Undersokningen (Vibration Technique Investigation),” Report I, Malmo-c Stockhim, Swedish Concrete Association, Stockholm, Sweden, 1940.
23. Taylor, P.; Wang, X.; and Wang, X., “Concrete Pavement Mixture Design and Analysis (MDA): Development and Evaluation of Vibrating Kelly Ball Test (VKelly Test) for the Workability of Concrete,” Iowa State University Institute for Transportation, Ames, IA, 2015.
24. Cook, M.; Ley, M.; and Ghaeezadah, A., “A Workability Test for Slip-Formed Concrete Pavements,” Construction and Building Materials, V. 68, 2014, pp. 376-383.
25. Smith, J.; Rampit, R.; and Parey, R., “Characterization of Vibration Effects on the Internal Structure and Strength of Regular and High-Strength Recycled Concrete,” Sixth International Conference on Durability of Concrete Structures, University of Leeds, Leeds, UK, 2018.
26. ASTM C618-22, “Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete,” ASTM International, West Conshohocken, PA, 2022, 5 pp.
27. Yammine, J.; Chaouche, M.; Guerinet, M.; Moranville, M.; and Roussel, N., “From Ordinary Rheology Concrete to Self-Compacting Concrete: A Transition between Frictional and Hydrodynamic Interactions,” Cement and Concrete Research, V. 38, No. 7, 2008, pp. 890-896.
28. ASTM C1064/C1064M-23, “Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete,” ASTM International, West Conshohocken, PA, 2023, 3 pp.
29. ASTM C143/C143M-20, “Standard Test Method for Slump of Hydraulic-Cement Concrete,” ASTM International, West Conshohocken, PA, 2020, 4 pp.
30. Omran, A.; Naji, S.; and Khayat, K., “Portable Vane Test to Assess Structural Buildup at Rest of Self-Consolidating Concrete,” ACI Materials Journal, V. 108, No. 6, Nov.-Dec. 2011, pp. 628-637.
31. ASTM C138/C138M-17a, “Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete,” ASTM International, West Conshohocken, PA, 2017, 6 pp.
32. ASTM C231-22, “Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method,” ASTM International, West Conshohocken, PA, 2022, 10 pp.
33. Feys, D.; Toebben, P.; Zarate, A.; Riding, K.; and Abd El Fattah, A., “How Much Consolidation Energy is Really Required to Create Concrete Specimens?” ACI Foundation, Farmington Hills, MI, 2023.
34. ASTM C1712-20, “Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test,” ASTM International, West Conshohocken, PA, 2020, 5 pp.
35. ASTM C642-21, “Standard Test Method for Density, Absorption, and Voids in Hardened Concrete,” ASTM International, West Conshohocken, PA, 2021, 3 pp.
36. ASTM C39/39M-23, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 2023, 8 pp.