Title:
Low-Carbon Concrete Achieved through Rheology Modification
Author(s):
Lesley Ko, Jeffery Bury, Charles Nmai
Publication:
Symposium Paper
Volume:
362
Issue:
Appears on pages(s):
570-584
Keywords:
chemical admixture, finishability, low-carbon concrete, pumpability, rheology modifying, sustainability
DOI:
10.14359/51741012
Date:
6/14/2024
Abstract:
Maintaining workability can be a challenge when the total cement content of a concrete mixture is minimized in order to lower the carbon footprint. This is especially the case in everyday concrete where Portland cement content is mostly optimized for a targeted strength. Unlike high-performance or self-consolidating concretes (SCC) which commonly have high cement or cementitious materials contents, a minimum paste volume is generally required in normal strength concrete (NSC) mixtures to ensure adequate workability for the application and to be acceptable in the field. In this study, a new generation of rheology-modifying water-reducing admixture that improves concrete rheology is used to further reduce cement content and provide favorable workability for concrete applications. Comparisons to reference concrete are presented for their fresh and hardened properties, including plastic viscosity, dynamic yield stress, finishability, pumpability, and targeted strength. By combining concrete technology and this new rheology modifying water-reducing admixture, an economical, workable low-carbon concrete can be achieved.
Related References:
1. GCCA-Concrete-Future-Roadmap-Document-AW-2022.pdf (gccassociation.org)
2. Kraus, A., Mazanec, O., Dengler, J., Hillesheim, N., and Bokern, J., “Influence of PAE, SMD and PCE Superplasticizers on the Rheological Properties of Mortars and Concrete”, Proceedings pro095: International RILEM Conference on Application of Superabsorbent Polymers and Other
New Admixtures in Concrete Construction, RILEM Publication SARL, 2014, Mechtcherine, V. and Schroefl, C., eds., p. 115-126.
3. ASTM C143/C143M – 20 Standard Test Method for Slump of Hydraulic-Cement Concrete; Annual Book of ASTM Standards 2020, Vol. 04.02; p. 117 – 120.
4. ASTM C138/C138M – 17a. Standard Test Method for Density (Unit Weight), Yield and Air Content (Gravimetric) of Concrete; Annual Book of ASTM Standards 2020, Vol. 04.02; p. 109 – 114.
5. ASTM C231/C231M – 17a. Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method; Annual Book of ASTM Standards 2020, Vol. 04.02; p. 167 – 176.
6. ASTM C39/C39M – 20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens; Annual Book of ASTM Standards 2020, Vol. 04.02; p. 21 – 28.
7. Kaplan, D., de Larrard, F., and Sedran T., “Design of Concrete Pumping circuit”, ACI Material Journal, V. 102, March – April, p. 110-117, 2005.
8. Merchtcherine, V., Nerella, V. N., Kasten K., “Testing Pumpability of Concrete Using Sliding Pipe Rheometer”, Construction and Building Materials, V. 53, p. 312-323, 2014.
9. Bury, M., Bury, J., and Martin, D., “Testing Effects of New Admixtures on Concrete finishing”, Concrete International, Vol. 16, No. 1, p. 26-31, 1994
10. ASTM C403/C403M – 16 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance; Annual Book of ASTM Standards 2020, Vol. 04.02; p. 250 – 256.
11. Tattersall, G. H. and Banfill, P. F. G., The Rheology of Fresh Concrete, Pitman Books Limited, 356p, 198.
12. Wallevik, J. E., “Relationship between the Bingham parameters and slump”, Cement and Concrete Research, v. 36, P. 1214-1221, 2006.