Title:
Mix-Design of a Long-Term Durable Concrete for the Reinforced Foundations in the Bridge on the Straits of Messina, Italy
Author(s):
Mario Collepardi, Silvia Collepardi, Roberto Troli
Publication:
Symposium Paper
Volume:
355
Issue:
Appears on pages(s):
413-422
Keywords:
concrete mixture design; corrosion of steel; heat of cement hydration; slag cement
DOI:
10.14359/51736049
Date:
7/1/2022
Abstract:
The present paper shows the study of a mixture design of the concrete used in the reinforced foundations of the bridge on the Straits of Messina in Italy. A cube compressive characteristic strength of 35 MPa (5,075 psi) is required for the foundation concrete. Due to the peculiar shape of the concrete foundations (completely embedded in the excavated ground), the damages caused by the thermal stress, the steel corrosion, and the alkali-silica reaction cannot be monitored and repaired. Therefore, a concrete structure must be designed without any damage for at least 200 years due to the very important role of this structure from a social point of view. In order to guarantee this long-term durability, there are two problems to be faced and solved: 1) the heat of cement hydration could cause cracks inside the foundation due to thermal gradients between the hotter nucleus of the massive structure and the colder peripheral areas; 2) the corrosion of the metallic reinforcements caused by the reaction between the metallic iron and the oxygen (O2) present in the air to an extent of about 20%; 3) the alkali-silica reaction causing a local disruption in the concrete. All these problems can be solved using a blast-furnace slag cement such as CEM III B 32.5 R characterized by a very small heat of hydration and adopting a ground coarse aggregate with a maximum size as large as 32 mm (1.28 in): the choice of this aggregate produces a reduction in the amount of mixing water and then of the cement content and reduces the volume of the entrapped air at about 1.3% by concrete volume. This amount of O2 would cause the corrosion of a negligible amount of iron corresponding to only 10 to 13 g (0.4 to 0.5 oz) of steel in 1 m3 (1.31 yd3) of concrete of each foundation. In order to prevent any ingress of air from the environment, the top of the foundation should be protected by self-compacting, self-compressing, and self-curing concrete.
Related References:
1. EN 197-1 “Cement composition, specification and conformity criteria for common cements”, 1993.
2. EN 206-1, “Concrete – Specification, performance, production and conformity”, December 2016.
3. M. Collepardi, S. Collepardi and R. Troli, Concrete Mix Design, pg. 41, Publisher Grafiche Tintoretto, Villorba (Italy), 2007.
4. M. Collepardi, The New Concrete, Second Edition, pp. 212-215, Publisher Grafiche Tintoretto, Villorba (Italy, 2010.
5. I. Lyse, ”Tests in consistency and strength of concrete having constant water content”, Proceedings A.S.T.M. 32, pp. 629-636, 1932.
6. M. Collepardi, The New Concrete, Second Edition, pg. 112, Publisher Grafiche Tintoretto, Villorba (Italy), 2010.
7. M. Collepardi, S. Collepardi and R. Troli, Concrete Mix Design, pg. 54, Publisher Grafiche Tintoretto, Villorba (Italy), 2007.
8. Eurocode 2, ”Design of concrete structures – Part 1-1: General rules and rules for buildings”, 2015.
9. M. Collepardi, S. Collepardi and R. Troli, The New Concrete (in Italian), Sixth Edition, pg. 259, Publisher Grafiche Tintoretto, Villorba (Italy), 2010.
10. M. Collepardi, “Self-Consolidating Concrete in the Presence of Fly-ash for Massive Structures”, Proceedings of Second International Symposium on Concrete Technology for Sustainable Development with Emphasis on Infrastructure, Hyderabad, India, 27 February – 3 March (2005) pp. 597-604.
11. M. Collepardi, S. Collepardi and R. Troli, The New Concrete (in Italian), Sixth Edition, pp. 260-262, Publisher Grafiche Tintoretto, Villorba (Italy), 2010.
12. M. Collepardi, S. Collepardi, G. Marchese and R. Troli, “The MAXXI Building in Rome with the Long, Inclined and Curvilinear Reinforced Concrete Walls after 16 Years from their Construction”, Thirteenth International Conference on Superplasticizers and Other Chemical Admixtures in Concrete, November,1-3 2021, Milan, Italy.
13. P. Pedeferri, “Corrosion Science and Engineering”, Published by Springer Switzerland, Edited by L. Lazzari and M. Pedeferri, pp.29-30, (2018).