International Concrete Abstracts Portal

  

Related References:

ANSI A118.1, 2019, “American National Standard Specifications for Dry-Set Cement Mortar,” American National Standards Institute, New York, NY.

ANSI A118.4, 2019, “American National Standard Specifications for Modified Dry-Set Cement Mortar,” American National Standards Institute, New York, NY.

Anvarsamarin, A.; Rofooei, F. R.; and Nekooei, M., 2018, “Soil-Structure Interaction Effect on Fragility Curve of 3D Models of Concrete Moment-Resisting Buildings,” Shock and Vibration, V. 2018, Article ID 7270137, 13 pp. doi: 10.1155/2018/7270137

ASCE/SEI 7-16, 2016, “Minimum Design Loads for Buildings and Other Structures,” American Society of Civil Engineers, Reston, VA, 800 pp.

ASCE/SEI 41-17, 2017, “Seismic Evaluation and Retrofit of Existing Buildings,” American Society of Civil Engineers, Reston, VA, 550 pp.

ASTM C1314-18, 2018, “Standard Test Method for Compressive Strength of Masonry Prism,” ASTM International, West Conshohocken, PA, 9 pp.

ASTM C1693, 2011, “Standard Specification for Autoclaved Aerated Concrete (AAC),” ASTM International, West Conshohocken, PA, 7 pp.

Banerjee, A. K.; Pramanik, D.; and Roy, R., 2016, “Seismic Structural Fragilities: Proposals for Improved Methodology per Spectral Matching of Accelerogram,” Engineering Structures, V. 111, Mar., pp. 538-551. doi: 10.1016/j.engstruct.2016.01.002

Basha, S. H., and Kaushik, H. B., 2015, “Evaluation of Nonlinear Material Properties of Fly Ash Brick Masonry under Compression and Shear,” Journal of Materials in Civil Engineering, ASCE, V. 27, No. 8, Aug., p. 04014227. doi: 10.1061/(ASCE)MT.1943-5533.0001188

Basha, S. H., and Kaushik, H. B., 2016, “Suitability of Fly Ash Brick Masonry as Infill in Reinforced Concrete Frames,” Materials and Structures, V. 49, No. 9, Sept., pp. 3831-3845. doi: 10.1617/s11527-015-0757-5

Bhosale, A.; Zade, N. P.; Davis, R.; and Sarkar, P., 2019, “Experimental Investigation of Autoclaved Aerated Concrete Masonry,” Journal of Materials in Civil Engineering, ASCE, V. 31, No. 7, July, p. 04019109. doi: 10.1061/(ASCE)MT.1943-5533.0002762

Bhosale, A. S.; Davis, R.; and Sarkar, P., 2018, “Seismic Safety of Vertically Irregular Buildings: Performance of Existing Indicators,” Journal of Architectural Engineering, ASCE, V. 24, No. 3, Sept., p. 04018013. doi: 10.1061/(ASCE)AE.1943-5568.0000319

BS EN 1052-3:2002, 2002, “Methods of Test for Masonry-Part 3: Determination of Initial Shear Strength,” British Standards Institution, London, UK, 18 pp.

Carvalho, E. C.; Coelho, E.; and Campos-Costa, A., 1999, “Preparation of the Full-Scale Tests on Reinforced Concrete Frames-Characteristics of the Test Specimens, Materials and Testing Conditions,” ICONS Report, Innovative Seismic Design Concepts for New and Existing Structures, European TMR Network, LNEC.

Celarec, D.; Ricci, P.; and Dolšek, M., 2012, “The Sensitivity of Seismic Response Parameters to the Uncertain Modelling Variables of Masonry-Infilled Reinforced Concrete Frames,” Engineering Structures, V. 35, Feb., pp. 165-177. doi: 10.1016/j.engstruct.2011.11.007

Celik, O. C., 2016, “Effect of AAC Infill Walls on Structural System Dynamics of a Concrete Building,” Journal of Earthquake Engineering, V. 20, No. 5, pp. 738-748. doi: 10.1080/13632469.2015.1104757

Celik, O. C., and Ellingwood, B. R., 2010, “Seismic Fragilities for Non-Ductile Reinforced Concrete Frames–Role of Aleatoric and Epistemic Uncertainties,” Structural Safety, V. 32, No. 1, Jan., pp. 1-12. doi: 10.1016/j.strusafe.2009.04.003

Chandrappa, A. K., and Biligiri, K. P., 2017, “Flexural-Fatigue Characteristics of Pervious Concrete: Statistical Distributions and Model Development,” Construction and Building Materials, V. 153, Oct., pp. 1-15. doi: 10.1016/j.conbuildmat.2017.07.081

Chen, X.; Wu, S.; and Zhou, J., 2014, “Variability of Compressive Strength of Concrete Cores,” Journal of Performance of Constructed Facilities, ASCE, V. 28, No. 4, Aug., p. 06014001. doi: 10.1061/(ASCE)CF.1943-5509.0000513

Chopra, A. K., 2007, Dynamics of Structures: Theory and Applications to Earthquake Engineering, Higher Education Press, Beijing, China.

Cornell, C. A.; Jalayer, F.; Hamburger, R. O.; and Foutch, D. A., 2002, “Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame Guidelines,” Journal of Structural Engineering, ASCE, V. 128, No. 4, Apr., pp. 526-533. doi: 10.1061/(ASCE)0733-9445(2002)128:4(526)

Di Trapani, F.; Macaluso, G.; Cavaleri, L.; and Papia, M., 2015, “Masonry Infills and RC Frames Interaction: Literature Overview and State of the Art of Macromodeling Approach,” European Journal of Environmental and Civil Engineering, V. 19, No. 9, pp. 1059-1095. doi: 10.1080/19648189.2014.996671

Dolšek, M., and Fajfar, P., 2008, “The Effect of Masonry Infills on the Seismic Response of a Four-Storey Reinforced Concrete Frame—A Deterministic Assessment,” Engineering Structures, V. 30, No. 7, July, pp. 1991-2001. doi: 10.1016/j.engstruct.2008.01.001

EasyFit version 5.6 [computer software], MathWave Technologies, Dnipro, Ukraine.

Ellingwood, B., and Tallin, A., 1985, “Limit States Criteria for Masonry Construction,” Journal of Structural Engineering, ASCE, V. 111, No. 1, Jan., pp. 108-122. doi: 10.1061/(ASCE)0733-9445(1985)111:1(108)

Ellingwood, B. R., 2001, “Earthquake Risk Assessment of Building Structures,” Reliability Engineering & System Safety, V. 74, No. 3, Dec., pp. 251-262. doi: 10.1016/S0951-8320(01)00105-3

EN 1998-1:2005, 2005, “Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings,” European Committee for Standardization, Brussels, Belgium, 229 pp.

FEMA-306, 1999, “Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings: Basic Procedures Manual,” Applied Technology Council (ATC-43) Project, The Partnership for Response and Recovery, Federal Emergency Management Agency, Washington, DC, 270 pp.

FEMA P695, 2009, “Quantification of Building Seismic Performance Factors,” Federal Emergency Management Agency, Washington, DC, 421 pp.

Hak, S.; Morandi, P.; Magenes, G.; and Sullivan, T. J., 2012, “Damage Control for Clay Masonry Infills in the Design of RC Frame Structures,” Journal of Earthquake Engineering, V. 16 No. sup1, pp. 1-35.

IS 456:2000, 2000, “Plain and Reinforced Concrete — Code of Practice,” Bureau of Indian Standards, New Delhi, India, 114 pp.

IS 875-1:1987, 1987, “Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures-Part 1: Dead Loads — Unit Weights of Building Materials and Stored Materials,” Bureau of Indian Standards, New Delhi, India, 44 pp.

IS 13920:2016, 2016, “Ductile Design and Detailing of Reinforced Concrete Structures Subjected to Seismic Forces - Code of Practice (First Revision),” Bureau of Indian Standards, New Delhi, India.

IS 1893-1:2016, 2016, “Criteria for Earthquake Resistant Design of Structures-Part 1: General Provisions and Buildings,” Bureau of Indian Standards, New Delhi, India, 44 pp.

IS 2185-3:2005, 2005, “Concrete Masonry Units-Part 3: Autoclaved Cellular Aerated Concrete Blocks,” Bureau of Indian Standards, New Delhi, India.

Jeon, J.-S.; Park, J.-H.; and DesRoches, R., 2015, “Seismic Fragility of Lightly Reinforced Concrete Frames with Masonry Infills,” Earthquake Engineering & Structural Dynamics, V. 44, No. 11, pp. 1783-1803. doi: 10.1002/eqe.2555

Kaushik, H. B.; Rai, D. C.; and Jain, S. K., 2006, “Code Approaches to Seismic Design of Masonry-Infilled Reinforced Concrete Frames: A State-of-the-Art Review,” Earthquake Spectra, V. 22, No. 4, pp. 961-983. doi: 10.1193/1.2360907

Kilinc, K.; Celik, A. O.; Tuncan, M.; Tuncan, A.; Arslan, G.; and Arioz, O., 2012, “Statistical Distributions of In-Situ Microcore Concrete Strength,” Construction and Building Materials, V. 26, No. 1, pp. 393-403. doi: 10.1016/j.conbuildmat.2011.06.038

Lawrence, S. J., 1985, “Random Variations in Brickwork Properties,” 7th International Brick Masonry Conference, Melbourne, Australia, pp. 537-547.

Lee, T.-H., and Mosalam, K. M., 2004, “Probabilistic Fiber Element Modeling of Reinforced Concrete Structures,” Computers & Structures, V. 82, No. 27, Oct., pp. 2285-2299. doi: 10.1016/j.compstruc.2004.05.013

Lilliefors, H. W., 1967, “On the Kolmogorov-Smirnov Test for Normality with Mean and Variance Unknown,” Journal of the American Statistical Association, V. 62, No. 318, June, pp. 399-402. doi: 10.1080/01621459.1967.10482916

Liu, Y. S., and Li, G. Q., 2004, “Behavior of Steel Frames With and Without AAC Infilled Walls Subjected to Static and Cyclic Horizontal Loads,” 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, Paper No. 1112, 11 pp.

Liu, Y.-S., and Li, G.-Q., 2005, “Experimental and Theoretical Research on Lateral Load Resistance of Steel Frames with Infilled Walls,” Journal of Building Structures, V. 26, No. 3, pp. 78-84.

Mander, J. B.; Priestley, M. J. N.; and Park, R., 1988, “Theoretical Stress-Strain Model for Confined Concrete,” Journal of Structural Engineering, ASCE, V. 114, No. 8, Sept., pp. 1804-1826. doi: 10.1061/(ASCE)0733-9445(1988)114:8(1804)

Mazzoni, S.; McKenna, F.; Scott, M. H.; and Fenves, G. L., 2006, “OpenSees Command Language Manual,” Open System for Earthquake Engineering Simulation (OpenSees), Pacific Earthquake Engineering Research (PEER) Center, 465 pp.

McKenna, F.; McGann, C.; Arduino, P.; and Harmon, J. A., 2018, “OpenSEES Laboratory,” Open System for Earthquake Engineering Simulation (OpenSees), Pacific Earthquake Engineering Research (PEER) Center, Berkeley, CA.

Memari, A. M.; Aghakouchak, A. A.; Ghafory Ashtiany, M.; and Tiv, M., 1999, “Full-Scale Dynamic Testing of a Steel Frame Building during Construction,” Engineering Structures, V. 21, No. 12, pp. 1115-1127. doi: 10.1016/S0141-0296(98)00068-6

Menegotto, M., and Pinto, P. E., 1973, “Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and Non-Elastic Behaviour of Elements under Combined Normal Force and Bending,” IABSE Reports of the Working Commissions, International Association of Bridge and Structural Engineering, V. 13, pp. 15-22. doi: 10.5169/seals-13741

Milanesi, R. R.; Morandi, P.; Penna, A.; and Magenes, G., 2018, “Seismic Performance of AAC Masonry Infill: From Traditional Systems to Innovative Solutions,” ce/papers, V. 2, No. 4, 311-317.

Montazerolghaem, M., 2015, “Analysis of Unreinforced Masonry Structures with Uncertain Data,” PhD thesis, Department of Civil and Architecture, Technische Universität Berlin, Berlin, Germany.

Morandi, P.; Hak, S.; and Magenes, G., 2014, “In-Plane Experimental Response of Strong Masonry Infills,” 9th International Masonry Conference, Guimarães, Portugal, International Masonry Society, 12 pp.

Narayanan, N., and Ramamurthy, K., 2000, “Structure and Properties of Aerated Concrete: A Review,” Cement and Concrete Composites, V. 22, No. 5, Oct., pp. 321-329. doi: 10.1016/S0958-9465(00)00016-0

Nath, S. K., and Thingbaijam, K. K. S., 2012, “Probabilistic Seismic Hazard Assessment of India,” Seismological Research Letters, V. 83, No. 1, pp. 135-149. doi: 10.1785/gssrl.83.1.135

Nowak, A. S., and Collins, K. R., 2000, Reliability of Structures, McGraw-Hill, New York, 360 pp.

Panagiotakos, T. B., and Fardis, M. N., 1996, “Seismic Response of Infilled RC Frames Structures,” 11th World Conference on Earthquake Engineering, Acapulco, Mexico.

Penna, A.; Magenes, G.; Calvi, G. M.; and Costa, A. A., 2008, “Seismic Performance of AAC Infill and Bearing Walls with Different Reinforcement Solutions,” 14th International Brick and Block Masonry Conference, Sydney, Australia, pp. 13-20.

Raj, A., 2020, “Strength Enhancement of Autoclaved Aerated Concrete (AAC) Block and Its Masonry,” PhD thesis, Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, India.

Raj, A.; Borsaikia, A. C.; and Dixit, U. S., 2020, “Evaluation of Mechanical Properties of Autoclaved Aerated Concrete (AAC) Block and its Masonry,” Journal of The Institution of Engineers (India): Series A, pp. 315-325.

Ravichandran, S. S., 2009, “Design Provisions for Autoclaved Aerated Concrete (AAC) Infilled Steel Moment Frames,” PhD thesis, The University of Texas at Austin, Austin, TX, 342 pp.

Ricci, P.; De Risi, M. T.; Verderame, G. M.; and Manfredi, G., 2013, “Influence of Infill Distribution and Design Typology on Seismic Performance of Low- and Mid-Rise RC Buildings,” Bulletin of Earthquake Engineering, V. 11, No. 5, pp. 1585-1616. doi: 10.1007/s10518-013-9453-4

RILEM Technical Committees 78-MCA and 51-ALC, 1993, Autoclaved Aerated Concrete - Properties, Testing and Design, S. Aroni, G. J. de Groot, M. J. Robinson, G. Svanholm, and F. H. Wittman, eds., Taylor & Francis Group, London, UK, 428 pp.

Sahoo, K.; Dhir, P. K.; Teja, P. R. R.; Sarkar, P.; and Davis, R., 2020, “Variability of Silica Fume Concrete and Its Effect on Seismic Safety of Reinforced Concrete Buildings,” Journal of Materials in Civil Engineering, ASCE, V. 32, No. 4, Apr., p. 04020024. doi: 10.1061/(ASCE)MT.1943-5533.0003072

Sahu, S.; Sarkar, P.; and Davis, R., 2019, “Quantification of Uncertainty in Compressive Strength of Fly Ash Brick Masonry,” Journal of Building Engineering, V. 26, Nov., p. 100843. doi: 10.1016/j.jobe.2019.100843

Sahu, S.; Sarkar, P.; and Davis, R., 2020, “Uncertainty in Bond Strength of Unreinforced Fly-Ash Brick Masonry,” Journal of Materials in Civil Engineering, ASCE, V. 32, No. 3, Mar., p. 06020003. doi: 10.1061/(ASCE)MT.1943-5533.0003095

Saneinejad, A., and Hobbs, B., 1995, “Inelastic Design of Infilled Frames,” Journal of Structural Engineering, ASCE, V. 121, No. 4, Apr., pp. 634-650. doi: 10.1061/(ASCE)0733-9445(1995)121:4(634)

Schober, G., 2005, “The Most Important Aspects of Microstructure Influencing Strength of AAC,” Autoclaved Aerated Concrete, M. C. Limbachiya and J. J. Roberts, eds., Taylor & Francis Group, London, UK, pp. 145-153.

Schueremans, L., and Van Gemert, D., 2006, “Probability Density Functions for Masonry Material Parameters – A Way to Go?” Structural Analysis of Historical Constructions, P. B. Lourenço, P. Roca, C. Modena, and S. Agrawal, eds., New Delhi, India, pp. 921-928.

Sherafati, M. A., and Sohrabi, M. R., 2016, “Probabilistic Model for Bed Joint Shear-Sliding Strength of Clay-Brick Walls Based on Field Test Data,” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, V. 2, No. 4, Dec., p. 04016007. doi: 10.1061/AJRUA6.0000879

Shome, N., 1999, “Probabilistic Seismic Demand Analysis of Nonlinear Structures,” PhD dissertation, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA, 320 pp.

Singhal, V., and Rai, D. C., 2014, “Suitability of Half-Scale Burnt Clay Bricks for Shake Table Tests on Masonry Walls,” Journal of Materials in Civil Engineering, ASCE, V. 26, No. 4, Apr., pp. 644-657. doi: 10.1061/(ASCE)MT.1943-5533.0000861

Sorrentino, L.; Infantino, P.; and Liberatore, D., 2016, “Statistical Tests for the Goodness of Fit of Mortar Compressive Strength Distributions,” 16th International Brick and Block Masonry Conference (IBMAC), Padova, Italy, C. Modena, F. da Porto, and M. R. Valluzzi, eds., Taylor & Francis Group, London, UK, pp. 1921-1928.

Stafford Smith, B., and Carter, C., 1969, “A Method of Analysis for Infilled Frames,” Proceedings of the Institution of Civil Engineers, V. 44, No. 1, Sept., pp. 31-48. doi: 10.1680/iicep.1969.7290

Stephens, M. A., 1974, “EDF Statistics for Goodness of Fit and Some Comparisons,” Journal of the American Statistical Association, V. 69, No. 347, Sept., pp. 730-737. doi: 10.1080/01621459.1974.10480196

Sýkora, M., and Holický, M., 2010, “Probabilistic Model for Masonry Strength of Existing Structures,” Engineering Mechanics, V. 17, No. 1, pp. 61-70.

Terzic, V., 2011, “Force-Based Element vs. Displacement-based Element,” OpenSees, NEES, and NEEScomm, University of California, Berkeley, Berkeley, CA, 25 pp.

Vamvatsikos, D., and Cornell, C. A., 2002, “Incremental Dynamic Analysis,” Earthquake Engineering & Structural Dynamics, V. 31, No. 3, pp. 491-514. doi: 10.1002/eqe.141

van Proosdij, A. S. J.; Sosef, M. S. M.; Wieringa, J. J.; and Raes, N., 2016, “Minimum Required Number of Specimen Records to Develop Accurate Species Distribution Models,” Ecography, V. 39, No. 6, pp. 542-552. doi: 10.1111/ecog.01509

Wijaya, H.; Rajeev, P.; Gad, E.; and Amirsardari, A., 2020, “Effect of Infill-Wall Material Types and Modeling Techniques on the Seismic Response of Reinforced Concrete Buildings,” Natural Hazards Review, ASCE, V. 21, No. 3, Aug., p. 04020031. doi: 10.1061/(ASCE)NH.1527-6996.0000395

Žarnić, R., and Gostič, S., 1997, “Masonry Infilled Frames as an Effective Structural Sub-Assemblage,” Seismic Design Methodologies for the Next Generation of Codes, P. Fajfar and H. Krawinkler, eds., Routledge, London, UK, pp. 335-346.