Title:
Self-Consolidating Concrete using FRAP and High Volume of Supplementary Cementitious Materials
Author(s):
Yasser Khodair, Arif Iqbal, and Mohammed Hussaini
Publication:
Symposium Paper
Volume:
334
Issue:
Appears on pages(s):
136-152
Keywords:
self-consolidating concrete; cementitiuous materials; shrinkage; recycled asphalt pavement; fly ash, slag, fresh properties, hardened properties
DOI:
10.14359/51720257
Date:
9/30/2019
Abstract:
This study discusses the results of an experimental program conducted to study the fresh, hardened and unrestrained shrinkage characteristics of self-consolidating concrete (SCC)
using fine recycled asphalt pavement (FRAP) and high volume of supplementary cementitious materials (SCMs) including class C fly-ash (FA) and slag (S). Sixteen mixtures were prepared
with different percentages of FA, S, and FRAP. SCC mixtures were divided into four groups where each group had a different percentage of FRAP replacing fine aggregate (10%, 20%, 30%, 40%) and Portland cement being replaced by different percentages of SCMs. The water to cementitious material (w/cm) ratio of 0.4 was used for SCC mixtures with a target slump flow higher than 500 mm. The flowability, deformability, filling capacity and resistance to segregation were measured to determine the fresh properties of the mixtures. Moreover, the compressive strength at 14, 28, and 90 days and split tensile strength at 28 days were determined
and durability characteristics including unrestrained shrinkage up to 90 days were tested. Analysis of experimental data showed that most of the mixtures satisfied the SCC fresh
properties requirements. The addition of FRAP had an adverse effect on the compressive, tensile strength and unrestrained free shrinkage of SCC mixtures.
Related References:
1. ACI Committee 237, 237R-2007, “Self-Consolidating Concrete,” ACI International, Farmington Hills, MI, http://www.concrete.org.
2. Khodair, Y. and Luqman, 2017. “Self-Compacting Concrete using Recycled Asphalt Pavement and Recycled Concrete Aggregate,” Journal of Building Engineering, Vol. 12, pp. 282–287.
3. Khodair, Y., and Raza, M. 2017, “Sustainable Self-Consolidating Concrete using Recycled Asphalt Pavement and High Volume of Supplementary Cementitious
Materials,” Construction and Building Materials, Vol. 131, pp. 245-253.
4. Modarres, A., and Hosseini, Z. 2014, “Mechanical Properties of Roller Compacted Concrete Containing Rice Husk Ash with Original and Recycled Asphalt Pavement
Material,”Materials and Design, Vol. 64, pp. 227–236.
5. Mahmoud,E., Ibrahim, A., El-Chabib, H, and Patibandla, V., 2013, “Self-Consolidating Concrete Incorporating High Volume of Fly Ash, Slag, and Recycled Asphalt Pavement,” International Journal of Concrete Structures and Materials, Vol. 7 No. 2, pp. 155–163.
6. Fidelis O. OKAFOR, 2010, “Performance of Recycled Asphalt Pavement as Coarse Aggregate in Concrete,” Leonardo Electronic Journal of Practices and Technologies,
Vol. 17, pp. 47-58.
7. K. M. A. Hossain, and M. Lachemi, 2010, “Fresh, Mechanical, and Durability Characteristics of Self Consolidating Concrete Incorporating Volcanic Ash, Journal of
Materials in Civil Engineering, ASCE, Vol. 7, pp. 651-657.
8. ASTM C192–07, 2007, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory,”. American Society for Testing and Materials, Vol. 4, No.
02, pp. 117–123.
9. ASTM C 150/C150M-11, 2011 “Standard Specification for Portland Cement,” American Society for Testing and Materials,” West Conshohocken, Pennsylvania, USA.
10. ASTM C 1611/C 1611 M-09b, 2009, “Standard test method for slump flow of selfconsolidating concrete,” American Society for Testing and Materials, West
Conshohocken, PA.
11. ASTM C 1621/ C 1621M-09b, 2009, “Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring, American Society for Testing and Materials,
Pennsylvania, 370 PA.
12. ASTM C 39/ C39M-10, 2010, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Society for Testing and Materials,
Pennsylvania, PA,
13. ASTM C496 / C496M – 11, 2011, “Standard Test Method for Splitting Tensile Strength Of Cylindrical Concrete Specimens Cement Concrete & Aggregates,” Australia-
CCAA. Use of Recycled Aggregates in Construction. Sydney, Australia: CCAA; 2008 Construction and Building Materials, Vol. 22, No. 9, 1963–1971.
14. ASTM C 490/C 490M-2009, “Standard Practice for Use of Apparatus for the Determination of Length Change of hardened Cement Paste, Mortar, and Concrete,”
American Society for Testing and Materials, Pennsylvania, PA.