Title:
Axial Load-Bending Moment (P-M) Interactions of Geopolymer Concrete Columns Reinforced with and without Steel Fiber
Author(s):
Nabeel A. Farhan, M. Neaz Sheikh, and Muhammad N. S. Hadi
Publication:
Structural Journal
Volume:
117
Issue:
1
Appears on pages(s):
133-144
Keywords:
analytical modeling; columns; geopolymer; P-M interaction diagram; steel fiber
DOI:
10.14359/51720206
Date:
1/1/2020
Abstract:
In this paper, the layer-by-layer integration method was used to analytically establish and investigate the axial load-bending moment (P-M) interactions of geopolymer concrete (GPC) columns reinforced with and without steel fibers. The developed analytical model was validated with experimental results. The developed analytical method provided reliable estimates of the maximum axial load and bending moment capacities of GPC columns reinforced with and without steel fibers. A parametric study was also conducted to investigate the influence of the compressive strength of GPC, longitudinal steel bar reinforcement ratio, and aspect ratio of steel fibers on the P-M interactions of GPC columns.
Related References:
1. Duxson, P.; Fernández-Jiménez, A.; Provis, J. L.; Lukey, G. C.; Palomo, A.; and van Deventer, J. S., “Geopolymer Technology: The Current State of the Art,” Journal of Materials Science, V. 42, No. 9, 2007, pp. 2917-2933. doi: 10.1007/s10853-006-0637-z
2. Hadi, M. N. S.; Farhan, N. A.; and Sheikh, M. N., “Design of Geopolymer Concrete with GGBFS at Ambient Curing Condition Using Taguchi Method,” Construction and Building Materials, V. 140, 2017, pp. 424-431. doi: 10.1016/j.conbuildmat.2017.02.131
3. Turner, L. K., and Collins, F. G., “Carbon Dioxide Equivalent (CO2-E) Emissions: A Comparison between Geopolymer and OPC Cement Concrete,” Construction and Building Materials, V. 43, 2013, pp. 125-130. doi: 10.1016/j.conbuildmat.2013.01.023
4. Habert, G.; d’Espinose de Lacaillerie, J. B.; and Roussel, N., “An Environmental Evaluation of Geopolymer Based Concrete Production: Reviewing Current Research Trends,” Journal of Cleaner Production, V. 19, No. 11, 2011, pp. 1229-1238. doi: 10.1016/j.jclepro.2011.03.012
5. McLellan, B. C.; Williams, R. P.; Lay, J.; Van Riessen, A.; and Corder, G. D., “Costs and Carbon Emissions for Geopolymer Pastes in Comparison to Ordinary Portland Cement,” Journal of Cleaner Production, V. 19, No. 9-10, 2011, pp. 1080-1090. doi: 10.1016/j.jclepro.2011.02.010
6. Lai, M.; Hanzic, L.; and Ho, J. C., “Fillers to Improve Passing Ability of Concrete,” Structural Concrete, V. 20, No. 1, 2019, pp. 185-197. doi: 10.1002/suco.201800047
7. Maybury, J.; Ho, J. C. M.; and Binhowimal, S. A. M., “Fillers to Lessen Shear Thickening of Cement Powder Paste,” Construction and Building Materials, V. 142, 2017, pp. 268-279. doi: 10.1016/j.conbuildmat.2017.03.076
8. Sufian Badar, M.; Kupwade-Patil, K.; Bernal, S. A.; Provis, J. L.; and Allouche, E. N., “Corrosion of Steel Bars Induced by Accelerated Carbonation in Low and High Calcium Fly Ash Geopolymer Concretes,” Construction and Building Materials, V. 61, 2014, pp. 79-89. doi: 10.1016/j.conbuildmat.2014.03.015
9. Olivia, M., and Nikraz, H., “Properties of Fly Ash Geopolymer Concrete Designed By Taguchi Method,” Materials and Design, V. 36, 2012, pp. 191-198. doi: 10.1016/j.matdes.2011.10.036
10. Part, W. K.; Ramli, M.; and Cheah, C. B., “An Overview on the Influence of Various Factors on the Properties of Geopolymer Concrete Derived from Industrial By-Products,” Construction and Building Materials, V. 77, 2015, pp. 370-395. doi: 10.1016/j.conbuildmat.2014.12.065
11. Zhao, Q.; Nair, B.; Rahimian, T.; and Balaguru, P., “Novel Geopolymer Based Composites with Enhanced Ductility,” Journal of Materials Science, V. 42, No. 9, 2007, pp. 3131-3137. doi: 10.1007/s10853-006-0527-4
12. Ranjbar, N.; Talebian, S.; Mehrali, M.; Kuenzel, C.; Cornelis Metselaar, H. S.; and Jumaat, M. Z., “Mechanisms of Interfacial Bond in Steel and Polypropylene Fiber Reinforced Geopolymer Composites,” Composites Science and Technology, V. 122, 2016, pp. 73-81. doi: 10.1016/j.compscitech.2015.11.009
13. Ganesan, N.; Indira, P. V.; and Santhakumar, A., “Engineering Properties of Steel Fibre Reinforced Geopolymer Concrete,” Advances in Concrete Construction, V. 1, No. 4, 2013, pp. 305-318.
14. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Engineering Properties of Ambient Cured Alkali-Activated Fly Ash–Slag Concrete Reinforced with Different Types of Steel Fiber,” Journal of Materials in Civil Engineering, ASCE, V. 30, No. 7, 2018, p. 04018142. doi: 10.1061/(ASCE)MT.1943-5533.0002333
15. Tanyildizi, H., and Yonar, Y., “Mechanical Properties of Geopolymer Concrete Containing Polyvinyl Alcohol Fiber Exposed to High Temperature,” Construction and Building Materials, V. 126, 2016, pp. 381-387. doi: 10.1016/j.conbuildmat.2016.09.001
16. Reed, M.; Lokuge, W.; and Karunasena, W., “Fibre-Reinforced Geopolymer Concrete with Ambient Curing for In Situ Applications,” Journal of Materials Science, V. 49, No. 12, 2014, pp. 4297-4304. doi: 10.1007/s10853-014-8125-3
17. Natali, A.; Manzi, S.; and Bignozzi, M. C., “Novel Fiber-Reinforced Composite Materials Based on Sustainable Geopolymer Matrix,” Procedia Engineering, V. 21, 2011, pp. 1124-1131. doi: 10.1016/j.proeng.2011.11.2120
18. Dattatreya, J. K.; Rajamane, N. P.; Sabitha, D.; Ambily, P. S.; and Nataraja, M. C., “Flexural Behaviour of Reinforced Geopolymer Concrete Beams,” International Journal of Civil and Structural Engineering, V. 2, No. 1, 2011, p.138.
19. Chang, E. H., “Shear and Bond Behaviour of Reinforced Fly Ash-Based Geopolymer Concrete Beams,” Curtin University of Technology, Perth, Australia, 2009, 382 pp.
20. Ng, T. S.; Amin, A.; and Foster, S. J., “The Behaviour of Steel-Fibre-Reinforced Geopolymer Concrete Beams in Shear,” Magazine of Concrete Research, V. 65, No. 5, 2013, pp. 308-318. doi: 10.1680/macr.12.00081
21. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; and Mendis, P., “Behavior of Concentrically Loaded Geopolymer-Concrete Circular Columns Reinforced Longitudinally and Transversely with GFRP Bars,” Engineering Structures, V. 117, 2016, pp. 422-436. doi: 10.1016/j.engstruct.2016.03.036
22. Albitar, M.; Mohamed Ali, M. S.; and Visintin, P., “Experimental Study on Fly Ash and Lead Smelter Slag-Based Geopolymer Concrete Columns,” Construction and Building Materials, V. 141, 2017, pp. 104-112. doi: 10.1016/j.conbuildmat.2017.03.014
23. Sumajouw, D. M.; Hardjito, D.; Wallah, S. E.; and Rangan, B. V., “Fly Ash-Based Geopolymer Concrete: Study of Slender Reinforced Columns,” Journal of Materials Science, V. 42, No. 9, 2007, pp. 3124-3130. doi: 10.1007/s10853-006-0523-8
24. Sarker, P. K., “Analysis of Geopolymer Concrete Columns,” Materials and Structures, V. 42, No. 6, 2009, pp. 715-724. doi: 10.1617/s11527-008-9415-5
25. Elchalakani, M.; Karrech, A.; Dong, M.; Mohamed Ali, M. S.; and Yang, B., “Experiments and Finite Element Analysis of GFRP Reinforced Geopolymer Concrete Rectangular Columns Subjected to Concentric and Eccentric Axial Loading,” Structures, V. 14, 2018, pp. 273-289. doi: 10.1016/j.istruc.2018.04.001
26. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Behaviour of Ambient Cured Steel Fibre Reinforced Geopolymer Concrete Columns under Axial and Flexural Loads,” Structures, V. 15, 2018, pp. 184-195. doi: 10.1016/j.istruc.2018.07.001
27. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Behavior of Ambient-Cured Geopolymer Concrete Columns under Different Loads,” ACI Structural Journal, V. 115, No. 5, Sept. 2018, pp. 1419-1429. doi: 10.14359/51702250
28. Collins, M. P., and Mitchell, D., Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, NJ, 1991.
29. Hardjito, D.; Wallah, S. E.; Sumajouw, D. M.; and Rangan, B. V., “The Stress-Strain Behaviour of Fly Ash-Based Geopolymer Concrete,” Development in Mechanics of Structures and Materials, V. 35, 2004, pp. 831-834.
30. Mansur, M. A.; Chin, M. S.; and Wee, T. H., “Stress-Strain Relationship of High-Strength Fiber Concrete in Compression,” Journal of Materials in Civil Engineering, ASCE, V. 11, No. 1, 1999, pp. 21-29. doi: 10.1061/(ASCE)0899-1561(1999)11:1(21)
31. Fernandez-Jimenez, A. M.; Palomo, A.; and Lopez-Hombrados, C., “Engineering Properties of Alkali-Activated Fly Ash Concrete,” ACI Materials Journal, V. 103, No. 2, Mar.-Apr. 2006, pp. 106-112.
32. Sofi, M.; Van Deventer, J. S. J.; Mendis, P. A.; and Lukey, G. C., “Engineering Properties of Inorganic Polymer Concretes (IPCs),” Cement and Concrete Research, V. 37, No. 2, 2007, pp. 251-257. doi: 10.1016/j.cemconres.2006.10.008
33. Bentur, A., and Mindess, S., Fibre Reinforced Cementitious Composites, CRC Press, Boca Raton, FL, 2006.
34. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
35. Yazici, V., and Hadi, M. N. S., “Axial Load-Bending Moment Diagrams of Carbon FRP Wrapped Hollow Core Reinforced Concrete Columns,” Journal of Composites for Construction, ASCE, V. 13, No. 4, 2009, pp. 262-268. doi: 10.1061/(ASCE)CC.1943-5614.0000010
36. Karim, H.; Neaz Sheikh, M.; and Hadi, M. N. S., “Load and Moment Interaction Diagram for Circular Concrete Columns Reinforced with GFRP Bars and GFRP Helices,” Journal of Composites for Construction, ASCE, V. 21, No. 1, 2017, p. 04016076. doi: 10.1061/(ASCE)CC.1943-5614.0000737
37. Khan, Q. S.; Sheikh, M. N.; and Hadi, M. N. S., “Axial-Flexural Interactions of GFRP-CFFT Columns with and without Reinforcing GFRP Bars,” Journal of Composites for Construction, ASCE, V. 21, No. 3, 2017, p. 04016109. doi: 10.1061/(ASCE)CC.1943-5614.0000771