Title:
Comparison of Existing Approaches for Computing Deflection of Reinforced Concrete
Author(s):
Peter H. Bischoff
Publication:
Structural Journal
Volume:
117
Issue:
1
Appears on pages(s):
231-240
Keywords:
beams; deflection; effective moment of inertia; minimum thickness; slabs
DOI:
10.14359/51718072
Date:
1/1/2020
Abstract:
This paper evaluates the approach adopted by ACI 318-19 for computing deflection of reinforced concrete. Comparison is made with the European approach and Branson’s approach used in previous editions of ACI 318. The adopted approach uses a rational expression for the effective moment of inertia, Ie, with a reduced cracking moment that gives greater values of computed deflection for lightly reinforced slabs. The impact of this change on member stiffness and minimum thickness requirements related to immediate and long-term deflection limits for serviceability is evaluated for beams and one-way slabs. Appropriate limits for maximum service load and member span are provided for slabs, and more stringent requirements are needed for minimum thickness of beams. Information about two-way slabs is also provided.
Related References:
ACI Committee 318, 1963, “Building Code Requirements for Reinforced Concrete (ACI 318-63),” American Concrete Institute (ACI), Farmington Hills, MI, 144 pp.
ACI Committee 318, 1971, “Building Code Requirements for Reinforced Concrete (ACI 318-71),” American Concrete Institute (ACI), Farmington Hills, MI, 78 pp.
ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), American Concrete Institute (ACI),” Farmington Hills, MI, 519 pp.
ACI Committee 318, 2019, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19),” American Concrete Institute (ACI), Farmington Hills, MI, 624 pp.
ACI Committee 435, 2000, “Control of Deflection in Concrete Structures (ACI 435R-95(00)),” American Concrete Institute, Farmington Hills, MI, 77 pp.
Bartlett, F. M., 2016, “Deflections,” Concrete Design Handbook, Cement Association of Canada, Ottawa, ON, Canada, pp. 6-1 to 6-36.
Bertero, R., and Bertero, A., 2018, “Statistical Evaluation of Minimum Thickness Provisions for Slab Deflection Control,” ACI Structural Journal, V. 115, No. 6, Nov., pp. 1659-1670. doi: 10.14359/51706926
Bischoff, P. H., 2005, “Revaluation of Deflection Prediction for Concrete Beams Reinforced with Steel and Fiber-Reinforced Polymer Bars,” Journal of Structural Engineering, ASCE, V. 131, No. 5, pp. 752-767. doi: 10.1061/(ASCE)0733-9445(2005)131:5(752)
Bischoff, P. H., 2007, “Rational Model for Calculating Deflection of Reinforced Concrete Beams and Slabs,” Canadian Journal of Civil Engineering, V. 34, No. 8, pp. 992-1002. doi: 10.1139/L07-020
Bischoff, P. H., 2018, “Service Load Deflection of Tilt-Up Concrete Wall Panels,” Canadian Journal of Civil Engineering, V. 45, No. 8, pp. 684-689. doi: 10.1139/cjce-2017-0319
Bischoff, P. H., and Gross, S. P., 2011, “Design Approach for Calculating Deflection of FRP Reinforced Concrete,” Journal of Composites for Construction, ASCE, V. 15, No. 4, pp. 490-499. doi: 10.1061/(ASCE)CC.1943-5614.0000195
Bischoff, P. H., and Scanlon, A., 2007, “Effective Moment of Inertia for Calculating Deflections of Concrete Members Containing Steel Reinforcement and FRP Reinforcement,” ACI Structural Journal, V. 104, No. 1, Jan.-Feb., pp. 68-75.
Bischoff, P. H., and Veysey, S., 2011, “Minimum Thickness Requirements Needed to Satisfy Deflection Limits for One-Way Reinforced Concrete Construction,” CSCE 2011 General Conference, Ottawa, ON, Canada, GC-023-1/10.
Branson, D. E., 1965, “Instantaneous and Time-Dependent Deflections of Simple and Continuous Reinforced Concrete Beams,” HPR Report No. 7, Part 1, Alabama Highway Department, Bureau of Public Roads, Montgomery, AL.
Comité Euro-International du Béton (CEB), 1985, CEB Design Manual on Cracking and Deformations, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland.
CSA Group, 2014, “Design of Concrete Structures (CSA A23.3-14),” Canadian Standards Association, Toronto, ON, Canada.
European Committee for Standardization (CEN), 2004, “Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings (Eurocode 2),” European Standard BS EN 1992-1-1, Brussels, Belgium.
Favre, R., and Charif, H., 1994, “Basic Model and Simplified Calculations of Deformations According to the CEB-FIP Model Code 1990,” ACI Structural Journal, V. 91, No. 1, Jan.-Feb., pp. 169-177.
Fédération Internationale du Béton (FIB), 2013, “fib Model Code for Concrete Structures 2010,” fib, John Wiley & Sons, Inc., New York.
Gilbert, R. I., 1999, “Deflection Calculation for Reinforced Concrete Structures - Why We Sometimes Get It Wrong,” ACI Structural Journal,
V. 96, No. 6, Nov.-Dec., pp. 1027-1032.
Gilbert, R. I., 2007, “Tension Stiffening in Lightly Reinforced Concrete Slabs,” Journal of Structural Engineering, ASCE, V. 133, No. 6, pp. 899-903. doi: 10.1061/(ASCE)0733-9445(2007)133:6(899)
Scanlon, A., and Bischoff, P. H., 2008, “Shrinkage Restraint and Loading History Effects on Deflection of Flexural Members,” ACI Structural Journal, V. 105, No. 4, July-Aug., pp. 498-506.
Stivaros, P. C., 2012, “Control of Deflection in Concrete Slabs and Effects of Construction Loads,” Andy Scanlon Symposium on Serviceability and Safety of Concrete Structures: From Research to Practice, SP-284, P. H. Bischoff and E. Musselman, eds., American Concrete Institute, Farmington Hills, MI, pp. 17-10 – 17-22.
Tang, J., and Lubell, A. S., 2008, “Influence of Longitudinal Reinforcement Strength on One-Way Slab Deflection,” Canadian Journal of Civil Engineering, V. 35, No. 10, pp. 1076-1087. doi: 10.1139/L08-050
Wang, C.-K., and Salmon, C. G., 1965, Reinforced Concrete Design, International Textbook Co., Scranton, PA, 754 pp.