Title:
Requirements of Shear Strength and Hoops for Performance-Based Design of Interior Beam-Column Joints
Author(s):
Hyeon-Jong Hwang and Hong-Gun Park
Publication:
Structural Journal
Volume:
116
Issue:
2
Appears on pages(s):
245-256
Keywords:
bond slip; deformation capacity; energy dissipation ratio; interior beam-column joint; joint hoop bars; joint shear strength; performance- based design
DOI:
10.14359/51713290
Date:
3/1/2019
Abstract:
In reinforced concrete moment frames subjected to cyclic loading, the shear strength of beam-column joints is degraded as the lateral deformation increases. In the present study, design equations of the joint shear strength and hoop were developed for performance-based design of interior beam-column joints. The target drift ratio and bar bond parameters were considered to define the requirements of the joint shear strength and hoop strength. For verification, the proposed design method was applied to 50 existing interior beam-column joint specimens. The proposed method predicted the variance of the joint shear strength according to the target drift ratio. Further, the results of a parametric study were used to simplify the proposed method, and a modification of the current ACI 318 method was proposed for performance-based design.
Related References:
1. Feng, F.; Jiang, K.; Hwang, H. J.; and Yi, W. J., “Earthquake Response of Low-Rise RC Moment Frame Structures According to Energy Dissipation Ratio of Beam-Column Joints,” Journal of Structural Integrity and Maintenance, V. 3, No. 1, 2018, pp. 33-43. doi: 10.1080/24705314.2018.1426171
2. Leon, R. T., “Interior Joints with Variable Anchorage Lengths,” Journal of Structural Engineering, ASCE, V. 115, No. 9, 1989, pp. 2261-2275. doi: 10.1061/(ASCE)0733-9445(1989)115:9(2261)
3. Hakuto, S.; Park, R.; and Tanaka, H., “Effect of Deterioration of Bond of Beam Bars Passing through Interior Beam-Column Joints of Flexural Strength and Ductility,” ACI Structural Journal, V. 96, No. 5, Sept.-Oct. 1999, pp. 858-864.
4. Meinheit, D. F., and Jirsa, J. O., “Shear Strength of Reinforced Concrete Beam-Column Joints,” Report No. 77-1, Department of Civil Engineering, Structures Research Laboratory, University of Texas at Austin, Austin, TX, Jan. 1977.
5. Bonacci, J., and Pantazopoulou, S., “Parametric Investigation of Joint Mechanics,” ACI Structural Journal, V. 90, No. 1, Jan.-Feb. 1993, pp. 61-71.
6. Lee, J. Y.; Kim, J. Y.; and Oh, G. J., “Strength Deterioration of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Loading,” Engineering Structures, V. 31, No. 9, 2009, pp. 2070-2085. doi: 10.1016/j.engstruct.2009.03.009
7. Lee, H. J., and Lin, Y. R., “Preliminary Design Recommendations for RC Beam-Column Joints with High-Strength Reinforcement,” 13th SEEBUS, Seoul, Korea, 2011, pp. 1-10.
8. Hong, S. G.; Lee, S. G.; and Kang, T. H. K., “Deformation-Based Strut-and-Tie Model for Interior Joints of Frames Subject to Load Reversal,” ACI Structural Journal, V. 108, No. 4, July-Aug. 2011, pp. 423-433.
9. Hwang, H. J.; Eom, T. S.; and Park, H. G., “Shear Strength Degradation Model for Performance-Based Design of Interior Beam-Column Joints,” ACI Structural Journal, V. 114, No. 5, Sept.-Oct. 2017, pp. 1143-1154. doi: 10.14359/51700780
10. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
11. Joint ACI-ASCE Committee 352, “Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures (ACI 352R-02),” American Concrete Institute, Farmington Hills, MI, 2002.
12. NZS 3101:2006, “The Design of Concrete Structures,” Standards New Zealand, New Zealand, 2006, 698 pp.
13. BS EN 1998-1:2004, “Eurocode 8: Design of Structures for Earthquake Resistance,” British Standards Institution, London, UK, 2004.
14. FEMA 356, “Prestandard and Commentary for the Seismic Rehabilitation of Buildings,” Federal Emergency Management Agency, Washington, DC, 2000.
15. Fujii, S., and Morita, S., “Comparison between Interior and Exterior RC Beam-Column Joint Behavior,” Design of Beam-Column Joints for Seismic Resistance, SP-123, American Concrete Institute, Farmington Hills, MI, 1991, pp. 145-166.
16. Park, R.; Tanaka, H.; and Xin, X., “High-Strength Concrete Beam-Column Joints of Moment Resisting Frames,” High-Strength Concrete in Seismic Regions, SP-176, American Concrete Institute, Farmington Hills, MI, 1998, pp. 357-378.
17. Hwang, S. J., and Lee, H. J., “Analytical Model for Predicting Shear Strengths of Interior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI Structural Journal, V. 97, No. 1, Jan.-Feb. 2000, pp. 35-44.
18. Murakami, H.; Fujii, S.; Ishiwata, Y.; and Morita, S., “Shear Strength and Deformation Capacity of Interior R/C Beam-Column Joint Subassemblage,” 12th World Conference on Earthquake Engineering, New Zealand, No. 679, 2000.
19. Park, J. W.; Yun, S. G.; Kim, B. I.; and Lee, J. Y., “A Study for Shear Deterioration of Reinforced Concrete Beam-Column Joints Failing in Shear after Flexural Yielding of Adjacent Beams,” Journal of the Korea Concrete Institute, V. 24, No. 4, 2012, pp. 399-406. doi: (in Korean)10.4334/JKCI.2012.24.4.399
20. Shiohara, H., “New Model for Shear Failure of RC Interior Beam-Column Connections,” Journal of Structural Engineering, ASCE, V. 127, No. 2, 2001, pp. 152-160. doi: 10.1061/(ASCE)0733-9445(2001)127:2(152)
21. Shiohara, H., “Reinforced Concrete Beam-Column Joints: An Overlooked Failure Mechanism,” ACI Structural Journal, V. 109, No. 1, Jan.-Feb. 2012, pp. 65-74.
22. Priestley, M. J. N., “Brief Comments of Elastic Flexibility of Reinforced Concrete Frames and Significance to Seismic Design,” Bulletin of the New Zealand National Society for Earthquake Engineering, V. 31, No. 4, 1998, pp. 246-259.
23. Eom, T. S.; Hwang, H. J.; and Park, H. G., “Energy-Based Hysteresis Model for Reinforced Concrete Beam-Column Connections,” ACI Structural Journal, V. 112, No. 2, Mar.-Apr. 2015, pp. 157-166.
24. Hwang, H. J.; Eom, T. S.; and Park, H. G., “Bond-Slip Relationship of Beam Flexural Bars in Interior Beam-Column Joints,” ACI Structural Journal, V. 112, No. 6, Nov.-Dec. 2015, pp. 827-837. doi: 10.14359/51687708
25. Priestley, M. J. N., “Performance Based Seismic Design,” Proceedings, 12th World Conference on Earthquake Engineering, New Zealand, 2000.
26. Paulay, T., and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, Inc., New York, 1992.
27. Eom, T., and Park, H., “Elongation of Reinforced Concrete Members Subjected to Cyclic Loading,” Journal of Structural Engineering, ASCE, V. 136, No. 9, 2010, pp. 1044-1054. doi: 10.1061/(ASCE)ST.1943-541X.0000201
28. Vecchio, F. J., and Collins, M. P., “Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Structural Journal, V. 83, No. 2, Mar.-Apr. 1986, pp. 219-231.
29. Kim, J., and LaFave, J. M., “Joint Shear Behavior of Reinforced Concrete Beam-Column Connections Subjected to Seismic Lateral Loading,” Newmark Structural Engineering Laboratory-NSEL Report Series, NSEL-020, University of Illinois at Urbana-Champaign, Urbana, IL, 2009, 218 pp.
30. LaFave, J. M., and Kim, J., “Joint Shear Behavior Prediction for RC Beam-Column Connections,” International Journal of Concrete Structures and Materials, V. 5, No. 1, 2011, pp. 57-64. doi: 10.4334/IJCSM.2011.5.1.057