Title:
Development Length of Headed Bar Based on Nonuniform Bond Stress Distribution
Author(s):
Hyeon-Jong Hwang, Hong-Gun Park, and Wei-Jian Yi
Publication:
Structural Journal
Volume:
116
Issue:
2
Appears on pages(s):
29-40
Keywords:
bearing force; bond strength; bond test; development length; headed bar.
DOI:
10.14359/51712274
Date:
3/1/2019
Abstract:
The anchorage capacity of headed bars shows large variations according to design conditions, such as diameter of reinforcing bars, location of anchorage, and the use of fiber-reinforced concrete. In the present study, a design method was studied considering such various design conditions. In the proposed model, the anchorage strength of a headed bar was defined as the sum of the contributions of the straight bar length and the head bearing. Particularly, a nonuniform bond stress distribution model was used for the straight bar length. The proposed method was applied to 361 existing test specimens with various conditions of headed bar anchorage, including compression-compression tension (CCT) node, lap splice, and beam-column joint. The predicted results were compared to the existing test results and the predictions of current design codes including ACI 318 and Model Code 2010. The results showed that the proposed model predicted the test results with reasonable precision.
Related References:
1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
2. fib, “fib Model Code for Concrete Structures 2010,” fib, Ernst & Sohn, Berlin, Germany, 2010, 420 pp.
3. Bashandy, T. R., “Application of Headed Bars in Concrete Members,” PhD dissertation, University of Texas at Austin, Austin, TX, 1996, 302 pp.
4. Wright, J. L., and McCabe, S. L., “The Development Length and Anchorage Behavior of Headed Reinforcing Bars,” SM Report No. 44, University of Kansas Center for Research, Lawrence, KS, Sept. 1997.
5. Choi, D. U.; Hong, S. G.; and Lee, C. Y., “Test of Headed Reinforcement in Pullout,” KCI Concrete Journal, V. 14, No. 3, 2002, pp. 102-110.
6. Choi, D. U., “Test of Headed Reinforcement in Pullout II: Deep Embedment,” International Journal of Concrete Structures and Materials, V. 18, No. 3, 2006, pp. 151-159.
7. Thompson, M. K.; Ziehl, M. J.; Jirsa, J. O.; and Breen, J. E., “CCT Nodes Anchored by Headed Bars-Part 1: Behavior of Nodes,” ACI Structural Journal, V. 102, No. 6, Nov.-Dec. 2005, pp. 808-815.
8. Thompson, M. K.; Jirsa, J. O.; and Breen, J. E., “CCT Nodes Anchored by Headed Bars-Part 2: Capacity of Nodes,” ACI Structural Journal, V. 103, No. 1, Jan.-Feb. 2006, pp. 65-73.
9. Thompson, M. K.; Ledesma, A.; Jirsa, J. O.; and Breen, J. E., “Lap Splices Anchored by Headed Bars,” ACI Structural Journal, V. 103, No. 2, Mar.-Apr. 2006, pp. 271-279.
10. Thompson, M. K.; Jirsa, J. O.; and Breen, J. E., “Behavior and Capacity of Headed Reinforcement,” ACI Structural Journal, V. 103, No. 4, July-Aug. 2006, pp. 522-530.
11. Hong, S. G.; Chun, S. C.; Lee, S. H.; and Oh, B., “Strut-and-Tie Model for Development of Headed Bars in Exterior Beam-Column Joint,” ACI Structural Journal, V. 104, No. 5, Sept-Oct. 2007, pp. 590-600.
12. Chun, S. C., “Lap Splice Tests Using High-Strength Headed Bars of 550 MPa (80 ksi) Yield Strength,” ACI Structural Journal, V. 112, No. 6, Nov.-Dec. 2015, pp. 679-688. doi: 10.14359/51687936
13. Chun, S. C.; Choi, C. S.; and Jung, H. S., “Side-Face Blowout Failure of Large-Diameter High-Strength Headed Bars in Beam-Column Joints,” ACI Structural Journal, V. 114, No. 1, Jan.-Feb. 2017, pp. 161-171. doi: 10.14359/51689161
14. Sim, H. J.; Chun, S. C.; and Choi, S., “Anchorage Strength of Headed Bars in Steel Fiber-Reinforced UHPC of 120 and 180 MPa,” Journal of the Korea Concrete Institute, V. 28, No. 3, 2016, pp. 365-373. (in Korean). doi: 10.4334/JKCI.2016.28.3.365
15. Shao, Y.; Darwin, D.; O’Reilly, M.; Lequesne, R.; Ghimire, K.; and Hano, M., “Anchorage of Conventional and High-Strength Headed Reinforcing Bars,” SM Report No. 117, University of Kansas Center for Research, Inc., 2016, 334 pp.
16. Hwang, H. J.; Park, H. G.; and Yi, W. J., “Nonuniform Bond Stress Distribution Model for Evaluation of Bar Development Length,” ACI Structural Journal, V. 114, No. 4, July-Aug. 2017, pp. 839-849. doi: 10.14359/51689446
17. Hwang, H. J.; Park, H. G.; and Yi, W. J., “Development Length of Standard Hooked Bar Based on Nonuniform Bond Stress Distribution,” ACI Structural Journal, V. 114, No. 6, Nov.-Dec. 2017, pp. 1637-1648. doi: 10.14359/51700918
18. ASTM A970/A970M-15, “Standard Specification for Headed Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2015, 9 pp.
19. Eligehausen, R.; Popov, E. P.; and Bertero, V. V., “Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations,” Earthquake Engineering Research Council Report No. 82/23, University of California, Berkeley, Berkeley, CA, 1983, 169 pp.
20. Viwathanatepa, S.; Popov, E. P.; and Bertero, V. V., “Effects of Generalized Loadings on Bond of Reinforcing Bars Embedded in Confined Concrete Blocks,” Earthquake Engineering Research Council Report No. 79/22, University of California, Berkeley, Berkeley, CA, 1979, 304 pp.
21. Joint ACI-ASCE Committee 408, “Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03),” American Concrete Institute, Farmington Hills, MI, 2003, 49 pp.