Self-Compacting Concrete (SCC) Made from Supersulfated Cements (SSC)

International Concrete Abstracts Portal

The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

  


Title: Self-Compacting Concrete (SCC) Made from Supersulfated Cements (SSC)

Author(s): Jefferson T. O. Homrich, Letícia Volkweis, Julia Beatriz Milani, Guilherme Holub Camargo, Caroline Angulski da Luz, and José Ilo Pereira Filho

Publication: Symposium Paper

Volume: 326

Issue:

Appears on pages(s): 36.1-36.8

Keywords: supersulfated cement, self-compacting concrete, ettringite, heat oh hydration, shrinkage, expansion

DOI: 10.14359/51711018

Date: 8/10/2018

Abstract:

Considerable attention has been given to special cements, capable of reducing CO2 emissions, energy and limestone consumption. Supersulfated cements (SSC) are primarily comprised of blast-furnace slag, (90-80%), calcium sulfate (10-20%) and an alkaline activator, which is often Portland cement, though in a relative small quantity (around 5%) or hydroxide (KOH). Besides requiring less energy and greenhouse gas emissions in its production, supersulfated cement (SSC) can provide a lower heat of hydration and lower shrinkage. These characteristics are desired mainly in self-compacting concrete (SCC) whose consumption of cement is high, then it is subject to present a higher heat of hydration. The goal of this paper was to study the suitability of supersulfated cement to produce a self-compacting concrete. Therefore, SSC was obtained from 85 % of GBFS, 15% of calcium sulfate (phosphogypsum) and 5% of Portland cement. The concrete was produced and investigated in relation to fluidity properties, heat of hydration, length variation and compressive strength at 7 and 28 days. A sample of SCC made with Portland cement with a lower heat of hydration was also made as comparison. The results showed that SCC made with SSC presented a lower compressive strength but showed better fluidity properties, a lower heat of hydration and no shrinkage.

Related References:

1. Neville, A. M., Brooks, J. J. Tecnologia do Concreto. Porto Alegre: Bookman, 2013.

2. Mehta, P. K., Monteiro, P. J. M. Concreto. Microestrutura, Propriedades e Materiais. 3ª. ed. São Paulo: Ibracon, 2008.

3. Kristiawan, S. A., Aditya, M. T. M., “Effect of high volume fly ash on shrinkage of self-compacting concrete”. Procedia Engineering - The 5th International Conference of Euro Asia Civil Engineering Forum, 2015, pp. 705-712.

4. Neville, A. M. Propriedades do concreto. 5ª. ed. Porto Alegre: Bookman, 2016.

5. Yang, K.-H., Moon, G.-D., Jeon, Y.-S. “Implementing ternary supplementary cementing binder for reduction of the heat of hydration of concrete”, Journal of Cleaner Production, 2016, pp. 845-852.

6. Kavalerova, E. Alkaline cements, and concretes: economical, ecological and legislative aspects. Internacional Conference alkali activated Materials – Research, Production and Utilization, 2007, pp. 293-302.

7. Gruskovnjak, A. et al. “Hydration mechanisms of super sulphated slag cement”. Cement and Concrete Research, 2008, pp. 983-992.

8. Angulski da Luz, C., Hooton R. D., “Influence of curing temperature on the process of hydration of supersulfated cements at early age”, Cement and Concrete Research, V. 77, 2015, pp. 69-75

9. Evju, C., Hansen, S., “Expansive properties of ettringite in a mixture of calcium aluminate cement, Portland cement and b-calcium sulfate hemihydrate”, Cement and Concrete Research, 2001. pp. 257-261.

10. Gracioli, Bruna et al. Influência da temperatura de calcinação do fosfogesso no desempenho de cimentos supersulfatados. 2016. Dissertação de Mestrado. Universidade Tecnológica Federal do Paraná.

11. Associação Brasileira de Normas Técnicas - NBR. 15823: Concreto auto-adensável. Rio de Janeiro, 2010.