Title:
Effect of Preconditioning on Durability Indices of Alkali-Activated Concretes
Author(s):
Maxim Kovtun
Publication:
Symposium Paper
Volume:
326
Issue:
Appears on pages(s):
19.1-19.6
Keywords:
alkali-activated concrete; chloride conductivity; compressive strength, durability; oxygen permeability index (OPI); preconditioning procedure; sorptivity
DOI:
10.14359/51711001
Date:
8/10/2018
Abstract:
According to literature, alkali-activated concretes can show poor durability performance during laboratory testing which can be caused by aggressive preconditioning procedure used in existing durability tests. In this study, effect of two preconditioning methods on results of durability tests was investigated. Along with the standard elevated temperature drying method, "vacuum-acetone" drying method was studied. Mixture of unclassified fly ash and ground granulated blast-furnace slag, 1:1 weight ratio, was used for preparation of alkali-activated concretes. Sodium hydroxide and sodium metasilicate solutions were used as sole activators. Oxygen permeability index, water sorptivity and chloride conductivity were determined for produced concretes. Results show that alkali-activated concretes are more sensitive to testing procedure than Portland cement concrete is. Existing durability tests can lead to misleading results on durability performance of alkali-activated concretes if specimens are aggressively preconditioned at elevated temperatures. In future, new methods should be developed for testing durability performance of alkali-activated concretes putting special emphasis on samples preparation procedure which would not alter material’s structure affecting its performance indicators.
Related References:
1. Friedlingstein, P., et al., “Update on CO2 emissions,” Nature Geoscience, V. 3, No. 12, 2010, pp. 811-812. doi: 10.1038/ngeo1022
2. Palomo, A., et al., “Alkali-activated fly ashes: A cement for the future,” Cement and Concrete Research, V. 29, No. 8, 1999, pp. 1323-1329. doi: 10.1016/S0008-8846(98)00243-9
3. Shi, C., et al., “New cements for the 21st century: The pursuit of an alternative to Portland cement,” Cement and Concrete Research, V. 41, No. 7, 2011, pp. 750-763. doi: 10.1016/j.cemconres.2011.03.016
4. Pratt, P. L., et al., “Alkali-activated slag cement and concrete: a review of properties and problems,” Advances in Cement Research, V. 7, No. 27, July 1995, pp. 93-102. doi: 10.1680/adcr.1995.7.27.93
5. Provis, J. L., and Bernal, S. A., “Geopolymers and Related Alkali-Activated Materials,” Annual Review of Materials Research, V. 44, No. 1, 2014, pp. 299-327. doi: 10.1146/annurev-matsci-070813-113515
6. Van Deventer, J. S. J., et. al., “Technical and commercial progress in the adoption of geopolymer cement,” Minerals Engineering, V. 29, 2012, pp. 89-104. doi: 10.1016/j.mineng.2011.09.009
7. Aperador, W., et. al., “Steel corrosion behaviour in carbonated alkali-activated slag concrete,” Corrosion Science, V. 51, No. 9, 2009, pp. 2027-2033. doi: 10.1016/j.corsci.2009.05.033
8. Zhu, H., et al., “Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars,” Construction and Building Materials, V. 65, 2014, pp. 51-59. doi: 10.1016/j.conbuildmat.2014.04.110
9. Monticelli, C., et al., “A study on the corrosion of reinforcing bars in alkali-activated fly ash mortars under wet and dry exposures to chloride solutions,” Cement and Concrete Research, V. 87, 2016, pp. 53-63. doi: 10.1016/j.cemconres.2016.05.010
10. Bernal, S. A., and Provis, J. L., “Durability of alkali-activated materials: Progress and perspectives,” Journal of the American Ceramic Society, V. 97, No. 4, 2014, pp. 997-1008. doi: 10.1111/jace.12831
11. Provis, J. L., et al., “Advances in understanding alkali-activated materials,” Cement and Concrete Research, V. 78, 2015, pp. 110-125. doi: 10.1016/j.cemconres.2015.04.013
12. Zhang, J., et al., “Durability of alkali-activated materials in aggressive environments: A review on recent studies,” Construction and Building Materials, V. 152, 2017, pp. 598-613. doi: 10.1016/j.conbuildmat.2017.07.027
13. Ismail, I., et al., “Drying-induced changes in the structure of alkali-activated pastes,” Journal of Materials Science, V. 48, No. 9, 2013, pp. 3566-3577. doi: 10.1007/s10853-013-7152-9
14. Arbi, K., et al., “A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives,” Industrial and Engineering Chemistry Research, V. 55, No. 19, 2016, pp. 5439-5453. doi: 10.1021/acs.iecr.6b00559
15. Ismail, I., et al., “Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes,” Construction and Building Materials, V. 48, 2013, pp. 1187-1201. doi: 10.1016/j.conbuildmat.2013.07.106
16. Alexander, M.G., et. al., “Concrete durability index testing manual,” Department of Civil Engineering, University of Cape Town, University of Witwatersrand, research monograph No. 4, 1999.
17. Ben Haha, M., et al., “Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags,” Cement and Concrete Research, V. 41, No. 3, 2011, pp. 301-310. doi: 10.1016/j.cemconres.2010.11.016
18. Shekhovtsova, J., “Using South African fly ash as a component of alkali- activated binder,” PhD Thesis, University of Pretoria, Pretoria, 2015.
19. Beushausen, H., and Alexander, M.G., “The South African durability index tests in an international comparison,” Journal of South African Institution of Civil Engineering, V. 50, No. 1, 2008, pp. 25-31.
20. Alexander, M.G., and Magee, B.J., “Durability performance of concrete containing condensed silica fume,” Cement and Concrete Research, V. 29, 1999, pp. 917-922.
21. Olorunsogo, F.T., and Padaychee, N., “Performance of recycled aggregate concrete monitored by durability indexes,” Cement and Concrete Research, V. 32, 2002, pp. 179-185.
22. Kovtun, M., and, Ingram, A., “The use of electric arc furnace slag as a coarse aggregate in alkali-activated concretes,” fib Symposium 2016. Performance-based approaches for concrete structures, Cape Town, South Africa, November 2016, CD-ROM..
23. Parrott, L.J., “Moisture conditioning and transport properties of concrete test specimens,” Materials and Structures, V. 27, 1994, pp. 460-468. doi:10.1007/BF02473450
24. Bakharev, T., “Durability of geopolymer materials in sodium and magnesium sulfate solutions,” Cement and Concrete Research, V. 35, No. 6, 2005, pp. 1233-1246. doi: 10.1016/j.cemconres.2004.09.002
25. Bakharev, T., “Resistance of geopolymer materials to acid attack,” Cement and Concrete Research, V. 35, No. 4, 2005, pp. 658-670. doi: 10.1016/j.cemconres.2004.06.005
26. Yang, K., et al., “Establishment of a preconditioning regime for air permeability and sorptivity of alkali-activated slag concrete,” Cement and Concrete Composites, V. 73, 2016, pp. 19-28. doi: 10.1016/j.cemconcomp.2016.06.019