Title:
Controlling Mass Concrete Effects in Large-Diameter Drilled Shafts Using Full-Length Central Void
Author(s):
Gray Mullins, Kevin R. Johnson, and Danny Winters
Publication:
Structural Journal
Volume:
115
Issue:
5
Appears on pages(s):
1475-1483
Keywords:
differential temperature; drilled shaft; mass concrete; peak temperature; voided shaft
DOI:
10.14359/51702376
Date:
9/1/2018
Abstract:
Mass concrete defines elements where heat formation due to exothermic hydration reactions can induce tension cracking as a result of excessive temperature differentials upon cooling. These conditions are anticipated in dams, large footings, and, in some cases, pier columns and caps where internal cooling systems can be used to moderate the effects. Until 2006, drilled shafts were not recognized by the Florida Department of Transportation as mass concrete due to the relatively small diameters (4 ft [1.2 m] diameter being the most common) and/or the perception that the surrounding environment was not conducive to producing mass concrete conditions. This paper presents the results of a full-scale shaft demonstration project where a 9 ft (2.74 m) diameter shaft was constructed with a 3.8 ft (1.17 m) diameter central void to control temperature and reduce costs. Peak and differential temperatures were shown to stay well within specified limits without the need for internal cooling systems.
Related References:
1. FDOT, “Structures Design Guidelines,” FDOT Structures Manual, Volume 1, Section 1.4.4, Mass Concrete,” Florida Department of Transportation, Tallahassee, FL, 2017, 346 pp.
2. ACI Committee 207, “Guide to Mass Concrete (ACI 207.1R-05) (Reapproved 2012),” American Concrete Institute, Farmington Hills, MI, 2012, 30 pp.
3. FDOT, “Standard Specifications for Road and Bridge Construction, Section 346-3.3 Mass Concrete,” Florida Department of Transportation, Tallahassee, FL, 2010, 996 pp.
4. FDOT, “Standard Specifications for Road and Bridge Construction, Section 346-3.3 Mass Concrete,” Florida Department of Transportation, Tallahassee, FL, 2017, 1226 pp.
5. Whitfield, T. T., “Effect of C3S Content on Expansion Due to Ettringite Formation,” master’s thesis, University of South Florida, Tampa, FL, 2006, 77 pp.
6. FDOT, “Structures Design Guidelines, Section 3.9, Mass Concrete,” Florida Department of Transportation, Tallahassee, FL, 2007, 221 pp.
7. Johnson, K. R., “Temperature Prediction Modeling and Thermal Integrity Profiling of Drilled Shafts,” Proceedings from ASCE Geo-Congress, V. 2014, 2014, pp. 1781-1794. doi: 10.1061/9780784413272.175
8. Mullins, G., “Thermal Integrity Profiling of Drilled Shaft,” DFI Journal, V. 4, No. 2, Dec. 2010, pp. 54-64. doi: 10.1179/dfi.2010.010
9. Johnson, K. M., and Mullins, G., “Concrete Temperature Control via Voiding Drilled Shafts,” Contemporary Issues in Deep Foundations, ASCE Geo Institute, GSP, V. I, No. 158, 2007, pp. 1-12.
10. Mullins, G.; Winters, D.; and Johnson, K. M., “Attenuating Mass Concrete Effects in Drilled Shafts,” Final Report, FDOT Project BD-544-39, University of South Florida, Tampa, FL, Sept. 2009, 148 pp.
11. Mullins, G., and Kranc, S., “Thermal Integrity Testing,” Final Report, FDOT Project BD544-20, University of South Florida, Tampa, FL, Dec. 2007, 214 pp.
12. AASHTO, “LRFD Bridge Design Specifications, U.S. Customary Units, seventh edition 2014 with interim revisions thru 2016,” American Association of State Highway and Transportation Officials, Washington, DC, 2016.
13. Mullins, G.; Winters, D.; and Collins, J., “Foundation Health Monitoring,” Final Report submitted to FHWA, University of South Florida, Tampa, FL, June 2009, 334 pp.
14. Schindler, A. K., and Folliard, K. J., “Temperature Control during Construction to Improve the Long Term Performance of Portland Cement Concrete Pavements,” Center for Transportation Research, The University of Texas at Austin, Austin, TX, 2004, 538 pp.
15. Farouki, O., “Physical Properties of Granular Materials with Reference to Thermal Resistivity,” Highway Research Record 128, National Research Council, Washington, DC, 1966, pp. 25-44
16. Johansen, O., “Thermal Conductivity of Soils,” U.S. Army Corps of Engineers Cold Regions Research and Engineering Laboratory, Hanover, NH, 1977, pp. 1-46
17. Kersten, M. S., “Thermal Properties of Soils,” University of Minnesota Institute of Technology, Engineering Experiment Station, V. LII, No. 21, 1949, 233 pp.
18. Mindess, S.; Young, J.; and Darwin, D., Concrete, second edition, Prentice Hall, Pearson Education, Inc., Upper Saddle River, NJ, 2003, 657 pp.
19. Mullins, G., and Johnson, K., “Voided Drilled Shafts,” U.S. Patent No. 8,206,064 B2, 2012.