Analysis and Comparison of EBR Techniques Applied to Masonry Vaults

International Concrete Abstracts Portal

The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

  


Title: Analysis and Comparison of EBR Techniques Applied to Masonry Vaults

Author(s): Elvis Cescatti, Francesca da Porto, Claudio Modena

Publication: Symposium Paper

Volume: 324

Issue:

Appears on pages(s): 12.1-12.16

Keywords: CFRP, SRG, TRM, Vaults, In-situ testing, analytical models, limit analysis, masonry arches

DOI: 10.14359/51702364

Date: 4/1/2018

Abstract:
The use of Externally Bonded Reinforcement (EBR) techniques is widely increasing in the last decades to strengthen both masonry and RC constructions. The use of different EBR configurations is well established also in the refurbishment of historical masonry constructions. The performance of different EBR techniques applied on existing historic masonry vaults was investigated in this work by means of in-situ destructive tests. The brick barrel vaults were located in Castel San Pietro, Verona (Italy) and were 5.6 m span, 1.1 m rise and 27 cm thick. The research focuses on inorganic applications by textiles and lime mortar matrix. In one case by steel reinforce grout and in the other with basalt textile reinforced mortar. Another system was based on common organic matrix. In addition to the experimental results of the static destructive tests of each vault that are discussed in order to evaluate the different response of such applications in terms of strengthening and ductility, a discussion on analytical models regarding the cross section and than the entire vaults are also provided with the aim to define the ultimate load reached by a strengthened vault. Such unique in-field opportunity allowed also some considerations in terms of efficacy and workability of mortar matrices.

Related References:

1. Heyman, J. 1996. Arches, Vaults and Buttresses: Masonry Structures and their Engineering, Variorum, Aldershot, Great Britain.

2. Cescatti, E. 2016. Combined experimental and numerical approaches to the assessment of historical masonry structures PhD Thesis, University of Trento.

3. Valluzzi, M.R., Valdemarca, M., Modena, C. 2001. Behaviour of brick masonry vaults strengthened by FRP laminates. Journal of Composites for Construction. ASCE, 5(3):163-169.

4. Foraboschi, P. 2001. Strength assessment of masonry arch retrofitted using composite reinforcements. Journal of British Masonry Society. University of Edinburgh, 15(1): 17–25.

5. Basilio, I., Oliveira, D., and Lourenço, P. 2010. Experimental Behavior of FRP Strengthened Masonry Arches. Journal of Composites for Construction. ASCE, 14(3):312-322.

6. Borri, A., Casadei, P., Castori, G., Hammond, J. 2009. Strengthening of Brick Masonry Arches with Externally Bonded Steel Reinforced Composite. Journal of Composites for Construction. ASCE,

13(6):468-475.

7. Girardello, P., Pappas, A., da Porto, F., Valluzzi M.R., 2013. Experimental testing and numerical modelling of masonry vaults. In: Proceedings of international conference on rehabilitation and restoration of structures, Chennai, India, 117–127.

8. Garmendia, L., Larrinaga, P., San-Mateos, E. and San-José, J.T. 2015. Strengthening masonry vaults with organic and inorganic composites: An experimental approach. Materials & Design. Elsevier, 85: 102-114.

9. Cescatti, E., Wasilewski, K., Modena, C. and Dalla Benetta M. 2016. In-situ destructive testing of strengthened masonry vaults. In proceedings of 10th International Conference on Structural Analysis of Historical Constructions, Leuven, Belgium, September 13-15.

10. Hegger J, Will N, Bentur A, Curbach M, Jesse F, Mobasher B, Peled A and Wastiels, J. 2006. Mechanical behaviour of textile reinforced concrete. Textile Reinforced Concrete. In: Brameshuber W (ed) State-ofthe-Art report of RILEM technical committee 201-TRC. RILEM, France, pp.135.

11. de Felice, G., De Stantis, S., Garmendia, L., Ghiassi, B, Larringa, P., Lourenço, P., Oliveira, D., Paolacci, F. and Papanicolaou, C. 2014. Mortar-based systems for externally bonded strengthening of masonry. Materials and Structures. Springer, 47(12): 2021–2037.

12. Ghiassi, B, Macari, G., Oliveira, D. and Lourenço, P.B. 2012. Numerical analysis of bond behavior between masonry bricks and composite materials. Elsevier, Engineering Structures, 43:210-220.

13. Valluzzi, M.R., Oliveira, D. V., Caratelli, A., Castori, G., Corradi, M., de Felice, G., Garbin, E., Garcia, D., Garmendia, L., Grande, E., Ianniruberto, U., Kwiecien, A., Leone, M., Lignola, G.P., Lourenço, P., Malena, M., Micelli, F., Panizza, M., Papanicolaou, C.G., Prota, A., Sacco, E., Triantafillou, T., Viskovic, A., Zajac, B. and Zuccarino, 2012. Round Robin Test for composite-to-brick shear bond characterization, Material and Structures. Springer, 45 (12): 1761-1791.

14. Lu, X.Z., Teng, J.G., Ye, L.P. and Jiang, J.J. 2005. Bond–slip models for FRP sheets/plates bonded to concrete. Engineering Structures. Elsevier, 27(6):920-937.

15. De Santis, S., Carozzi, F.G., de Felice, G., Poggi, C. 2017. Test methods for Textile Reinforced Mortar Systems. Composites Part B: Engineering. Elsevier, 127:121-132.

16. Triantafillou, T. 1998. Strengthening of Masonry structures using Epoxy-Bonded FRP laminates. Journal of Composites for Construction. ASCE, 2(2): 96-104.

17. Foraboschi, P. 2004. Strengthening of masonry arches with Fiber-Reinforced Polymer Strips. Journal of Composites for Construction. ASCE, 8(3):191-202.

18. Alecci, V., Focacci, F., Rovero, L., Stipo, G. and De Stefano, M. 2016. Extrados strengthening of brick masonry arches with PBO–FRCM composites: Experimental and analytical investigations; Composite Structures. Elsevier, 149:184-196.

19. Orduña Bustamante, A. 2003. Seismic Assessment of Ancient Masonry Structures by Rigid Blocks Limit Analysis. PhD Thesis, University of Minho.

20. Gilbert. M. 2005. RING Theory and modelling guide. Computational limit analysis and design unit. University of Sheffield, Sheffield

21. d'Ambrisi, A., Feo, L., Focacci, F., 2013. Masonry arches strengthened with composite unbonded tendons. Elsevier, Composite structures, 98:323-329.

22. Chen, Y., Ashour, A.F. and Garrity, S.W. 2007. Modified four-hinge mechanism analysis for masonry arches strengthened with near-surface reinforcement. Engineering Structures. Elsevier, 29(8):1864-1871.

23. Gilbert, M. 2007. Limit analysis applied to masonry arch bridges: state-of-the-art and recent developments. In proceeding of 5th International Conference on Arch Bridges, 12-14 September, Madeira, Portugal.

24. Roca, P., López-Almansa, F., Miquel, J. and Hanganu, A. 2007. Limit analysis of reinforced masonry vaults. Engineering Structures. Elsevier, 29(3): 431–439.

25. Garmendia, L., Marcos, I., Garbin, E. and Valluzzi, M.R. 2014. Strengthening of masonry arches with Textile-Reinforced Mortar: experimental behaviour and analytical approaches; Materials and Structures. Springer, 47(12):2067–2080.