Durability of Two-Stage (Pre-Placed Aggregate) Concrete to Sulfate Attack

International Concrete Abstracts Portal

The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

  


Title: Durability of Two-Stage (Pre-Placed Aggregate) Concrete to Sulfate Attack

Author(s): M. F. Najjar, A. M. Soliman, T. M. Azabi and M. L. Nehdi

Publication: Symposium Paper

Volume: 317

Issue:

Appears on pages(s): 1-16

Keywords: chemical; ettringite; physical; sodium sulfate; sulfate attack; supplementary cementitious materials; thaumasite; two-stage concrete.

DOI: 10.14359/51700844

Date: 6/1/2017

Abstract:
Sulfate attack is one of the aggressive damage mechanisms that can jeopardize the durability of concrete structures. Several research studies have investigated the positive influence imparted by supplementary cementitious materials (SCMs) regarding the resistance of conventional concrete to sulfate exposure. However, the effects of SCMs on the sulfate resistance of two-stage concrete (TSC) has not been duly explored. In this paper, the durability of TSC mixtures incorporating different SCMs, including fly ash (FA), silica fume (SF) and metakaolin (MK), as partial replacement for ordinary portland cement (OPC) was investigated. Two different sodium sulfate exposure regimes were simulated: full immersion (conducive to chemical sulfate attack) and partial immersion combined with cyclic temperature and relative humidity (conducive to physical salt attack). Results show that TSC specimens incorporating FA achieved acceptable resistance to chemical sulfate attack, while incurring severe surface scaling under physical salt attack. Moreover, TSC specimens made with MK exhibited adequate resistance to both chemical and physical attacks. Surprisingly, TSC specimens incorporating SF deteriorated significantly due to abundant thaumasite formation. An attempt is made herein to delineate the mechanisms that result in deterioration.

Related References:

Abdelgader, H. S. 1996. “Effect of Quantity of Sand on the Compressive Strength of Two-Stage Concrete,” Magazine of Concrete Research, V. 48, No. 177, pp. 353-360.

Abdelgader, H. S., Najjar, M. F. and Azabi, T. M., 2010,“Study of underwater concrete using two-stage (pre-placed aggregate) concrete in Libya,” Journal of Structural Concrete, V. 11, No. 3, pp.161-165.

ACI 201.2R-08, 2008 “Guide to Durable Concrete,” American Concrete Institute, Farmington Hills, USA.

ACI 304.1, 2005, “Guide for the use of preplaced aggregate concrete for structural and mass concrete applications,” American Concrete Institute, Farnington Hills, USA

ASTM D4404, 2010, Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry, American Society for Testing and Materials, West Conshohocken, PA.

Aye, T.; and Oguchi, C. T., 2011, “Resistance of Plain and Blended Cement Mortars Exposed to Severe Sulfate Attacks,” Construction and Building Materials, V. 25, No. 6, pp. 2988-2996.

Basista, M.; and Weglewski, W., 2008, “Micromechanical Modeling of Sulphate Corrosion in Concrete: Influence of Ettringite Forming Reaction,” Theoretical and Applied Mechanics, V. 35, No.1-3, pp. 29-52.

Bassuoni, M. T.; and Nehdi, M. L., 2009, “Durability of Self-Consolidating Concrete to Different Exposure Regimes of Sodium Sulphate Attack,” Materials and Structures, V. 42, No. 8, pp. 1039-1057.

Berndt, M., 2012, “Long–Term Durability of Preplaced Aggregate Concrete Piles,” Concrete International, ACI, V. 34, No. 12, pp. 36-42.

Crammond, N., 2002, “The Occurrence of Thaumasite in Modern Construction – a Review," Cement and Concrete Composites, V. 24, No. 3, pp. 393-402.

Gesoglu, M.; Güneyisi, E.; Özturan, T.; and Mermerdas, K., 2014, “Permeability Properties of Concretes with High Reactivity Metakaolin and Calcined Impure Kaolin,” Materials and Structures, V. 47, No. 4, pp.709-728.

Haynes, H.; and Bassuoni, M. T., 2011, “Physical Salt Attack on Concrete,” Concrete International, ACI, V. 33, No. 11, pp. 38-42

Haynes, H.; O’Neill, R.; Neff, M.; and Mehta, P. K., 2008, “Salt Weathering Distress on Concrete Exposed to Sodium Sulphate Environment,” ACI Materials Journal, V. 105, No. 1, pp. 35-43.

Hooton, R. D., 1993, “Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali-silica reactivity”, ACI Materials Journal, V. 90, No. 2, pp. 143–151.

Juel, I., Herfort, D., Gollop, R., Konnerup-Madsen, J., Jakobsen, H. and Skibsted, J., 2003, “A Thermodynamic Model for Predicting the Stability of Thaumasite”, Cement and Concrete Composites, V. 25, pp. 867-872.

Khatib, J. M.; and Clay, R. M., 2004, “Absorption Characteristics of Metakaolin Concrete,” Cement and Concrete Research, V. 34, No. 1, pp. 19-29.

Liu, Z.; Deng, D.; De Schutter, G.; and Yu, Z., 2012, “Chemical Sulfate Attack Performance of Partially Exposed Cement and Cement Plus Fly Ash Paste,” Construction and Building Materials, V. 28, No. 1, pp. 230-237.

Ma, H.; Tang, S.; and Li, Z., 2015, "New Pore Structure Assessment Methods for Cement Paste," Journal of Materials in Civil Engineering, ASCE, V. 27, No. 2, A4014002.

Mangat, P. S. and Khatib, J. M., 1993, “Influence of Fly Ash, Silica Fume, and Slag on Sulfate Resistance of Concrete”, ACI Materials Journal, V. 92, No. 5, pp. 542-552.

Mehta, P. K., 1992, “Sulfate attack on concrete – a critical review” in J. Skalny (ed.), Material Science of Concrete, American Ceramic Society, Westerville, OH, pp. 105–130.

Mehta, P. K., 2000, “Sulfate Attack on Concrete: Separating Myths from Reality”, Concrete International, V. 22, No. 8, pp. 57-61.

Najjar, F. M., Soliman, A. M., and Nehdi, M. L. 2016. “Two-Stage Concrete Made with Single, Binary and Ternary Binders”. Materials and Structures, V. 49, pp. 317-327.

Najjar, M.; Soliman, A.; and Nehdi, M., 2014, “Critical Overview of Two Stage Concrete: Properties and Applications,” Construction and Building Materials, V. 62, pp. 47-58.

Nehdi, M. L.; Suleiman, A. R.; and Soliman, A. M., 2014, “Investigation of Concrete Exposed to Dual Sulphate Attack,” Cement and Concrete Research, V. 64, pp. 42-53

Nehdi, M.; and Hayek, M., 2005, “Behavior of Blended Cement Mortars Exposed to Sulfate Solutions Cycling in Relative Humidity,” Cement and Concrete Research, V.35, No. 4, pp. 731-742.

Nguyen, H. T., 2011, “Water and Heat Transfer in Cement Based Materials,” PhD thesis, University of Tromso, Tromso, Norway.

Nguyen, V.; Leklou, N.; Aubert, J.; Mounanga, P., 2013, “The Effect of Natural Pozzolan on Delayed Ettringite Formation of the Heat-Cured Mortars,” Construction and Building Materials, V. 48, pp. 479-484.

Nielsen, P.; Nicolai, S.; Darimont, A.; and Kestemont, X., 2014, “Influence of Cement and Aggregate Type on Thaumasite Formation in Concrete,” Cement & Concrete Composites, V. 4, No. 53, pp. 115-126.

O’Malley, J. and Abdelgader, H. S., 2010, “Investigation into the viability of using two stage (pre-placed aggregate) concrete in an Irish setting,” Frontiers of architecture and civil engineering in china, V. 4, No. 1, pp.127-132.

Ramezanianpour, A. M., 2012, “Sulfate Resistance and Properties of Portland- Limestone Cements”, PhD thesis, University of Toronto, Toronto, ON, Canada.

Ramlochan, T.; Zacarias P., Thomas, M. D. A.; and Hooton, R. D., 2003, “The Effect of Pozzolans and Slag on The Expansion of Mortars Cured at Elevated Temperature: Part I: Expansion Behaviour”, Cement and Concrete Research, V. 33, No. 6, pp. 807-814.

Scherer, G. W., 2004, “Stress from Crystallization of Salt,” Cement and Concrete Research, V. 34, No. 9, pp. 1613-1624.

Schmidt, T., Lothenbach, B., Romer, M., Scrivener, K., Rentsch, D. and Figi R., 2008, “A Thermodynamic and Experimental Study of the Conditions of Thaumasite Formation”, Cement and Concrete Research, V.38, pp. 337-349.

Siddique, R.; and Klaus, J., 2009, “Influence of Metakaolin on the Properties of Mortar and Concrete: A Review,” Applied Clay Science, V. 43, No. 3, pp. 392-400.

Skalny, J., Marchand, J. and Odler, I., 2002, “Sulfate attack on concrete”, Spon Press, New York; 217p.

Skaropoulou, A.; Tsivilis, S.; Kakali, G.; Sharp, J. H.; Swamy, R. N., 2009, “Thaumasite Form of Sulfate Attack in Limestone Cement Mortars: A Study on Long Term Efficiency of Mineral Admixtures,” Construction and Building Materials, V. 23, No. 6, pp. 2338-2345.

Torii, K.; Taniguchi, K.; and Kawamura, M., 1995, “Sulfate Resistance of High Fly Ash Content Concrete,” Cement and Concrete Research, 1995, V. 25, No. 4, pp. 759-768.

Weng, T. L.; Lin, W. T.; and Cheng, A., 2013, “Effect of Metakaolin on Strength and Efflorescence Quantity of Cement-Based Composites,” The Scientific World Journal, pp. 1-11.

Wittmann, F. H.; Wittmann, A. D. A.; and Wang, P. G., 2014, “Capillary Absorption of Integral Water Repellent and Surface Impregnated Concrete,” Restoration of Buildings and Monuments, V. 20, No. 4, pp. 281-290.