Title:
Effects of Pre-Damage on Stress-Strain Relationship of Partially Confined Concrete
Author(s):
I. A. Tijani, Yu-Fei Wu, and C. W. Lim
Publication:
Structural Journal
Volume:
118
Issue:
1
Appears on pages(s):
61-72
Keywords:
confinement; pre-damage; repair; stress-strain relationship
DOI:
10.14359/51728089
Date:
1/1/2021
Abstract:
Existing studies have demonstrated that fiber-reinforced polymer (FRP) confinement is an effective way of enhancing the strength and ductility of damaged columns. An experimental and analytical exploration is undertaken to study the mechanical behavior of damaged columns and then subsequently repaired with FRP strips. The effectiveness of the repair technique on the strength and transition stress, initial, and hardening modulus is examined by using an existing model for the stress-strain parameters of FRP-confined pre-damaged concrete. These models enable the effectiveness to be scrutinized in terms of confinement pressure and damage degree. The current study has highlighted that the lateral confinement pressure affects the dilation phenomenon of FRP-confined pre-damaged concrete. The study also divulged that the classical model of confined concrete by the previous studies is not only applicable to the original form of the structures but also applicable to its damaged state. Furthermore, the current work extends the application of the energy balance method to the FRP-confined pre-damaged concrete.
Related References:
1. Wu, Y. F.; Yun, Y.; Wei, Y. Y.; and Zhou, Y. W., “Effect of Predamage on the Stress-Strain Relationship of Confined Concrete under Monotonic Loading,” Journal of Structural Engineering, ASCE, V. 140, No. 12, 2014, p. 04014093 doi: 10.1061/(ASCE)ST.1943-541X.0001015
2. Li, P.; Sui, L.; Xing, F.; Li, M.; Zhou, Y. W.; and Wu, Y. F., “Stress–Strain Relation Of Frp-Confined Predamaged Concrete Prisms With Square Sections of Different Corner Radii Subjected To Monotonic Axial Compression,” Journal of Composites for Construction, ASCE, V. 23, No. 2, 2019, p. 04019001 doi: 10.1061/(ASCE)CC.1943-5614.0000921
3. Tsonos, A. G., “Effectiveness of Cfrp-Jackets and Rc-Jackets in Post-Earthquake and Pre-Earthquake Retrofitting of Beam–Column Subassemblages,” Engineering Structures, V. 30, No. 3, 2008, pp. 777-793. doi: 10.1016/j.engstruct.2007.05.008
4. Ghernouti, Y.; Li, A.; and Rabehi, B., “Effectiveness of Repair On Damaged Concrete Columns By Using Fiber-Reinforced Polymer Composite and Increasing Concrete Section,” Journal of Reinforced Plastics and Composites, V. 31, No. 23, 2012, pp. 1616-1629. doi: 10.1177/0731684412458552
5. Iacobucci, R. D.; Sheikh, S. A.; and Bayrak, O., “Retrofit of Square Concrete Columns With Carbon Fiber-Reinforced Polymer for Seismic Resistance,” ACI Structural Journal, V. 100, No. 6, Nov.-Dec.2003, pp. 785-794.
6. Li, G.; Hedlund, S.; Pang, S. S.; Alaywan, W.; Eggers, J.; and Abadie, C., “Repair of Damaged RC Columns using Fast Curing FRP Composites,” Composites. Part B, Engineering, V. 34, No. 3, 2003, pp. 261-271. doi: 10.1016/S1359-8368(02)00101-4
7. Guo, Y. C.; Xiao, S. H.; Luo, J. W.; Ye, Y. Y.; and Zeng, J. J., “Confined Concrete in Fiber-Reinforced Polymer Partially Wrapped Square Columns: Axial Compressive Behavior and Strain Distributions by a Particle Image Velocimetry Sensing Technique,” Sensors (Switzerland), V. 18, No. 12, 2018, pp. 1-27. doi: 10.3390/s18124118
8. Ghanem, S. Y., and Harik, I. E., “Concentrically Loaded Circular RC Columns Partially Confined With FRP,” International Journal of Concrete Structures and Materials, V. 12, No. 1, 2018, p. 12 doi: 10.1186/s40069-018-0283-2
9. Zeng, J. J.; Guo, Y. C.; Gao, W. Y.; Li, J. Z.; and Xie, J. H., “Behavior of Partially And Fully FRP-Confined Circularized Square Columns under Axial Compression,” Construction and Building Materials, V. 152, 2017, pp. 319-332. doi: 10.1016/j.conbuildmat.2017.06.152
10. Wang, W.; Sheikh, M. N.; Al-Baali, A. Q.; and Hadi, M. N. S., “Compressive Behaviour of Partially FRP Confined Concrete: Experimental Observations and Assessment of the Stress-Strain Models,” Construction and Building Materials, V. 192, 2018, pp. 785-797. doi: 10.1016/j.conbuildmat.2018.10.105
11. Al-Abadi, H.; Paton-Cole, V.; Patel, V. I.; and Thai, H. T., “Axial Strength and Elastic Stiffness Behaviour of Partially Confined Concrete Columns,” Construction and Building Materials, V. 196, 2019, pp. 727-741. doi: 10.1016/j.conbuildmat.2018.11.104
12. Ismail, R.; Rashid, R. S. M.; Chan, W. C.; Jaafar, M. S.; and Hejazi, F., “Compressive Behavior of Concrete Cylinder Fully and Partially Confined by Carbon Fibre-Reinforced Polymer (CFRP),” Construction and Building Materials, V. 201, 2019, pp. 196-206. doi: 10.1016/j.conbuildmat.2018.12.095
13. ASTM D3039-17, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM International, West Conshohocken, PA, 2017.
14. Jiang, C.; Wu, Y. F.; and Jiang, J. F., “Effect of Aggregate Size on Stress-Strain Behavior of Concrete Confined by Fiber Composites,” Composite Structures, V. 168, 2017, pp. 851-862. doi: 10.1016/j.compstruct.2017.02.087
15. Zhou, Y. W., and Wu, Y. F., “General Model for Constitutive Relationships of Concrete and Its Composite Structures,” Composite Structures, V. 94, No. 2, 2012, pp. 580-592. doi: 10.1016/j.compstruct.2011.08.022
16. Peter, D., Introductory Statistics with R., Springer-Verlag New York Inc., 2008.
17. Béton, F. Externally Bonded FRP Reinforcement for RC Structures: Technical Report on the Design and use of Externally Bonded Fibre Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures, 2001.
18. Candappa, D. C.; Sanjayan, J. G.; and Setunge, S., “Complete Triaxial Stress-Strain Curves of High-Strength Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 13, No. 3, 2001, pp. 209-215. doi: 10.1061/(ASCE)0899-1561(2001)13:3(209)
19. Li, Y. F., and Sung, Y. Y., “A Study on The Shear-Failure of Circular Sectioned Bridge Column Retrofitted by Using CFRP Jacketing,” Journal of Reinforced Plastics and Composites, V. 23, No. 8, 2004, pp. 811-830. doi: 10.1177/0731684404032865
20. Jiang, J. F., and Wu, Y. F., “Characterization of Yield Surfaces For FRP-Confined Concrete,” Journal of Engineering Mechanics, ASCE, V. 140, No. 12, 2014, pp. 1-13. doi: 10.1061/(ASCE)EM.1943-7889.0000811
21. Ozbakkaloglu, T.; Gholampour, A.; and Lim, J. C., “Damage-Plasticity Model For FRP-Confined Normal-Strength and High-Strength Concrete,” Journal of Composites for Construction, ASCE, V. 20, No. 6, 2016, p. 04016053 doi: 10.1061/(ASCE)CC.1943-5614.0000712
22. Mohammadi, M., and Wu, Y. F., “Modified Plastic-Damage Model for Passively Confined Concrete Based on Triaxial Tests,” Composites. Part B, Engineering, V. 159, 2019, pp. 211-223. doi: 10.1016/j.compositesb.2018.09.074
23. Yu, T.; Teng, J. G.; Wong, Y. L.; and Dong, S. L., “Finite Element Modeling of Confined Concrete-Ii: Plastic-Damage Model,” Engineering Structures, V. 32, No. 3, 2010, pp. 680-691. doi: 10.1016/j.engstruct.2009.11.013
24. Richart, F. E.; Brandtzaeg, A.; and Brown, R. L., The Failure of Plain and Spirally Reinforced Concrete in Compression. Bull. 190, Univ. Illinois, Eng. Exp. Station. Champaign, (1929).
25. Jiang, J. F., and Wu, Y. F., “Identification of Material Parameters for Drucker–Prager Plasticity Model for FRP Confined Circular Concrete Columns,” International Journal of Solids and Structures, V. 49, No. 3-4, 2012, pp. 445-456. doi: 10.1016/j.ijsolstr.2011.10.002
26. Wu, Y. F., and Zhou, Y. W., “Unified Strength Model Based on Hoek-Brown Failure Criterion for Circular and Square Concrete Columns Confined by FRP,” Journal of Composites for Construction, ASCE, V. 14, No. 2, 2010, pp. 175-184. doi: 10.1061/(ASCE)CC.1943-5614.0000062
27. Tijani, I. A.; Wu, Y. F.; and Lim, C. W., “Aggregate Size Effects and General Static Loading Response on Mechanical Behavior of Passively Confined Concrete,” Construction and Building Materials, V. 205, 2019, pp. 61-72. doi: 10.1016/j.conbuildmat.2019.01.164
28. Lam, L., and Teng, J. G., “Design-Oriented Stress-Strain Model for FRP-Confined Concrete in Rectangular Columns,” Journal of Reinforced Plastics and Composites, V. 22, No. 13, 2003, pp. 1149-1186. doi: 10.1177/0731684403035429
29. Cao, Y. G.; Wu, Y. F.; and Li, X. Q., “Unified Model for Evaluating Ultimate Strain of FRP Confined Concrete Based on Energy Method,” Construction and Building Materials, V. 103, 2016, pp. 23-35. doi: 10.1016/j.conbuildmat.2015.11.042
30. Wu, Y. F., and Cao, Y. G., “Energy Balance Method for Modeling Ultimate Strain of Confined Concrete,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr. 2017, pp. 373-381. doi: 10.14359/51689429
31. Tijani, I. A.; Wu, Y. F.; and Lim, C. W., “Energy Balance Method for Modeling Ultimate Strain of Fiber-Reinforced Polymer-Repaired Concrete,” Structural Concrete, V. 21, No. 2, 2020, pp. 804-820. doi: 10.1002/suco.201900260