Title:
Performance of Ultra-High-Performance Concrete in Harsh Marine Environment for 21 Years
Author(s):
Edward G. Moffatt, Michael D. A. Thomas, Andrew Fahim, and Robert D. Moser
Publication:
Materials Journal
Volume:
117
Issue:
5
Appears on pages(s):
105-112
Keywords:
chloride ingress; corrosion; durability; marine exposure; ultra-high-performance concrete
DOI:
10.14359/51727022
Date:
9/1/2020
Abstract:
This paper presents the durability performance of ultra-high-performance concrete (UHPC) exposed to a marine environment for up to 21 years. Concrete specimens (152 x 152 x 533 mm [6 x 6 x 21 in.]) were cast using a water-cementitious materials ratio (w/cm) in the range of 0.09 to 0.19, various types and lengths of steel fibers, and the presence of conventional steel reinforcement bars in select mixtures. Laboratory testing included taking cores from each block and determining the existing chloride profile, compressive strength, electrochemical corrosion monitoring, and microstructural evaluation. Regardless of curing treatment and w/cm, the results revealed that UHPC exhibits significantly enhanced durability performance compared with typical high-performance concrete (HPC) and normal concretes. UHPC prisms exhibited minimal surface damage after being exposed to a harsh marine environment for up to 21 years. Chloride profiles revealed penetration to a depth of approximately 10 mm (0.39 in.) regardless of exposure duration.
Electrochemical corrosion monitoring also showed passivity for reinforcement at a cover depth of 25 mm (1 in.) following 20 years.
Related References:
1. Shi, C.; Wu, Z.; Xiao, J.; Wang, D.; Huang, Z.; and Fang, Z., “A Review of Ultra-High-Performance Concrete: Part I. Raw Materials and Mixture Design,” Construction and Building Materials, V. 101, 2015, pp. 741-751. doi: 10.1016/j.conbuildmat.2015.10.088
2. Gołaszewski, J., and Szwabowski, J., “Influence of Superplasticizers on Rheological Behaviour of Fresh Cement Mortars,” Cement and Concrete Research, V. 34, No. 2, 2004, pp. 235-248. doi: 10.1016/j.cemconres.2003.07.002
3. Zhang, Y. S.; Sun, W.; Liu, S. F.; Jiao, C. J.; and Lai, J. Z., “Preparation of C200 Green Reactive Powder Concrete and its Static–Dynamic Behaviors,” Cement and Concrete Composites, V. 30, No. 9, 2008, pp. 831-838. doi: 10.1016/j.cemconcomp.2008.06.008
4. Masse, S.; Zanni, H.; Lecourtier, J.; Roussel, J. C.; and Rivereau, A., “29Si Solid State NMR Study of Tricalcium Silicate and Cement Hydration at High Temperature,” Cement and Concrete Research, V. 23, No. 5, 1993, pp. 1169-1177. doi: 10.1016/0008-8846(93)90177-B
5. Yazıcı, H., “The Effect of Curing Conditions on Compressive Strength of Ultra High Strength Concrete with High Volume Mineral Admixtures,” Building and Environment, V. 42, No. 5, 2007, pp. 2083-2089. doi: 10.1016/j.buildenv.2006.03.013
6. Abbas, S.; Nehdi, M. L.; and Saleem, M. A., “Ultra-High-Performance Concrete: Mechanical Performance, Durability, Sustainability and Implementation Challenges,” International Journal of Concrete Structures and Materials, V. 10, No. 3, 2016, pp. 271-295. doi: 10.1007/s40069-016-0157-4
7. Heinz, D., and Ludwig, H., “Heat Treatment and the Risk of DEF Delayed Ettringite Formation in UHPC,” Proceedings of the International Symposium on UHPC, 2004, Kassel, Germany, pp. 717-730.
8. Muller, U.; Kuhne, H.; Fontana, P.; Meng, B.; and Nemecek, J., “Micro Texture and Mechanical Properties of Heat Treated and Autoclaved Ultra-High-Performance Concrete (UHPC),” Proceedings of the 2nd International Symposium on UHPC, Kassel, Germany, 2008, pp. 213-220.
9. Thomas, M.; Green, B.; O’Neal, E.; Perry, V.; Hayman, S.; and Hossack, A., “Marine Performance of UHPC at Treat Island,” Proceedings of the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 2012, pp. 365-370.
10. Ahlborn, T., and Kollmorgen, G., “Impact of Age and Size on the Mechanical Behavior of Ductal,” Report No. CSD-2004-07, Michigan Technological University, Houghton, MI, 2004.
11. Bonneau, O., “Reactive Powder Concretes: From Theory to Practice,” Concrete International, V. 18, No. 4, Apr. 1996, pp. 47-49.
12. Ozyildirim, C., “Evaluation of Ultra-High-Performance Fiber-Reinforced Concrete,” Report No. FHWA/VCTIR 12-R1, Virginia Center for Transportation Innovation and Research, Federal Highway Administration, McLean, VA, 2011.
13. Bonneau, O.; Vernet, C.; Moranville, M.; and Aïtcin, P. C., “Characterization of the Granular Packing and Percolation Threshold of Reactive Powder Concrete,” Cement and Concrete Research, V. 30, No. 12, 2000, pp. 1861-1867. doi: 10.1016/S0008-8846(00)00300-8
14. Ghafari, E.; Arezoumandi, M.; Costa, H.; and Julio, E., “Influence of Nano-Silica Addition on Durability of UHPC,” Construction and Building Materials, V. 94, 2015, pp. 181-188. doi: 10.1016/j.conbuildmat.2015.07.009
15. Neeley, B. D., and Walley, D. M., “Very-High-Strength-Concrete,” Military Engineering, V. 87, 1998, pp. 36-37.
16. Cargile, J. D.; O’Neil, E. F.; and Neeley, B. D., “Very-High-Strength-Concretes for Use in Blast- and Penetration-Resistant Structures,” AMPTIAC Q., V. 6, No. 4, 2002, pp. 61-66.
17. Richard, P., and Cheyrezy, M., “Composition of Reactive Powder Concretes,” Cement and Concrete Research, V. 25, No. 7, 1995, pp. 1501-1511. doi: 10.1016/0008-8846(95)00144-2
18. Campbell, R. L.; O’Neill, E. F.; Dowd, W. M.; and Dauriac, C. E., “Reactive Powder Concrete for Producing Sewar, Culvert, and Pressure Pipes,” Technical Report CPAR SL-98-3, U.S. Army Corps of Engineers, Washington, DC, 1998.
19. Graybeal, B. A., “Material Property Characterization of Ultra-High-Performance Concrete,” Report FHWA-HRT-06-103, Federal Highway Administration, Washington, DC, 2006.
20. Fahim, A.; Moffatt, E. G.; and Thomas, M. D. A., “Corrosion Resistance of Concrete Incorporating Supplementary Cementing Materials in a Marine Environment,” 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete, SP-320, A. Tagnit-Hamou, ed., American Concrete Institute, Farmington Hills, MI, 2017, 14 pp.
21. Moffatt, E. G.; Thomas, M. D. A.; and Fahim, A., “Performance of High-Volume Fly Ash Concrete in Marine Environment,” Cement and Concrete Research, V. 102, 2017, pp. 127-135. doi: 10.1016/j.cemconres.2017.09.008
22. Malhotra, V. M., and Bremner, T. W., “Performance of Concrete at Treat Island, U.S.A.: CANMET Investigations,” Third CANMET/ACI Intl Conf on Performance of Concrete in Marine Environment, V. M. Malhotra, ed., SP-163, American Concrete Institute, Farmington Hills, MI, 1996, pp. 1-52.
23. Thomas, M. D. A., and Bremner, T. W., “Performance of Lightweight Aggregate Concrete Containing Slag after 25 Years in a Harsh Marine Environment,” Cement and Concrete Research, V. 42, No. 2, 2012, pp. 358-364. doi: 10.1016/j.cemconres.2011.10.009
24. Moffatt, E. G., and Thomas, M. D. A., “Performance of 25-Year-Old Silica Fume and Fly Ash Lightweight Concrete Blocks in a Harsh Marine Environment,” Cement and Concrete Research, V. 113, 2018, pp. 65-73. doi: 10.1016/j.cemconres.2018.07.004
25. Fahim, A.; Ghods, P.; Isgor, O.; and Thomas, M., “A Critical Examination of Corrosion Rate Measurement Techniques Applied to Reinforcing Steel in Concrete,” Materials and Corrosion, V. 69, No. 12, 2018, pp. 1784-1799. doi: 10.1002/maco.201810263
26. Andrade, C., and Gonzalez, J. A., “Quantitative Measurements of Corrosion Rate of Reinforcing Steels Embedded in Concrete Using Polarization Resistance Measurements,” Materials and Corrosion, V. 29, No. 8, 1978, pp. 515-519. doi: 10.1002/maco.19780290804
27. Duprat, F.; Larrard, T.; and Vu, N. T., “Quantification of Tafel Coefficients According to Passive/Active State of Steel Carbonation-Induced Corrosion in Concrete,” Materials and Corrosion, V. 70, No. 11, 2019, pp. 1934-1963. doi: 10.1002/maco.201910962
28. Ge, J., and Isgor, O. B., “Effects of Tafel Slope, Exchange Current Density and Electrode Potential on the Corrosion of Steel in Concrete,” Materials and Corrosion, V. 58, No. 8, 2007, pp. 573-582. doi: 10.1002/maco.200604043
29. Parrott, L. J., “An Examination of Two Methods for Studying Diffusion Kinetics in Hydrated Cements,” Materials and Structures, V. 17, 1984, pp. 131-137.
30. Ngala, V. T., and Page, C. L., “Effects of Carbonation on Pore Structures and Diffusional Properties of Hydrated Cement Pastes,” Cement and Concrete Research, V. 27, No. 7, 07 1997, pp. 995-1007. doi: 10.1016/S0008-8846(97)00102-6
31. Manera, M.; Vennesland, M.; and Bertolini, L., “Chloride Threshold for Rebar Corrosion in Concrete with Addition of Silica Fume,” Corrosion Science, V. 50, No. 2, 2008, pp. 554-560. doi: 10.1016/j.corsci.2007.07.007
32. Angst, U.; Elsener, B.; Larsen, C. K.; and Vennesland, O., “Critical Chloride Content in Reinforced Concrete—A Review,” Cement and Concrete Research, V. 39, No. 12, 2009, pp. 1122-1138. doi: 10.1016/j.cemconres.2009.08.006
33. Angst, U.; Elsener, B.; Larsen, C. K.; and Vennesland, O., “Chloride Induced Reinforcement Corrosion: Electrochemical Monitoring Initiation Stage and Chloride Threshold Values,” Corrosion Science, V. 53, No. 4, 2011, pp. 1451-1464. doi: 10.1016/j.corsci.2011.01.025
34. Sosa, M.; Perez-Lopez, T.; Reyes, J.; Corvo, F.; Camacho-Chab, R.; and Quitana, P., and Aguilar. “D., “Influence of the Marine Environment on Reinforced Concrete Degradation Depending on Exposure Conditions,” International Journal of Electrochemical Science, V. 6, 2011, pp. 6300-6319.
35. Martínez, I., and Andrade, C., “Polarization Resistance Measurements of Bars Embedded in Concrete with Different Chloride Concentrations: EIS and DC Comparison,” Materials and Corrosion, V. 62, No. 10, 2011, pp. 932-942. doi: 10.1002/maco.200905596
36. Alonso, C.; Andrade, C.; and Gonzalez, J., “Relation between Resistivity and Corrosion Rate of Reinforcements in Carbonated Mortar Made with Several Cement Types,” Cement and Concrete Research, V. 18, No. 5, 1988, pp. 687-698. doi: 10.1016/0008-8846(88)90091-9
37. Fahim, A.; Dean, A. E.; Thomas, M. D. A.; and Moffatt, E. G., “Corrosion Resistance of Chromium-Steel and Stainless Steel Reinforcement In Concrete,” Materials and Corrosion, V. 70, No. 2, 2019, pp. 328-344. doi: 10.1002/maco.201709942