Title:
Numerical Modeling of Three Reinforced Concrete Bearing Wall Tests Subject to One-Sided Standard Fire
Author(s):
Kevin A. Mueller and Yahya C. Kurama
Publication:
Structural Journal
Volume:
116
Issue:
5
Appears on pages(s):
29-41
Keywords:
numerical modeling; reinforced concrete bearing walls; structural fire engineering
DOI:
10.14359/51716756
Date:
9/1/2019
Abstract:
This paper describes the numerical modeling of the thermal and out-of-plane structural behaviors of three full-scale reinforced concrete (RC) bearing wall specimens under fire. The test specimens were heated on one surface over half of the wall height through the ASTM E119 standard fire time-temperature curve, while simultaneously being subjected to a near-constant axial load and out-of-plane lateral mechanical boundary conditions at the top. Steep thermal gradients developed through the wall thickness, resulting in eccentric out-of-plane loading conditions due to the unsymmetrical degradation of the reinforcing steel and concrete (but with no concrete spalling). The philosophy for the numerical modeling was to evaluate the capability of a commercially available sequential structural fire analysis program to capture the measured temperatures, lateral and axial displacements, and shear forces and bending moments of the walls. Overall, the numerical models were able to capture the wall temperatures reasonably well. The analyses that corresponded to the experimental control scheme for the mechanical boundary conditions at the top of the wall in each test (that is, displacement-controlled or load-controlled) also provided reasonable comparisons with the measured wall displacements, shear forces, and bending moments. Two main sources for discrepancy were the inability of the analyses to accurately model the concrete compression strength and elastic (Young’s) modulus, and to capture the second-order effects from the large axial load applied on each wall.
Related References:
1. NIST, “Final Report on the Collapse of the World Trade Center Towers,” National Institute of Standards and Technology, Gaithersburg, MD, 2005.
2. Mueller, K.; Kurama, Y.; and McGinnis, M., “Out-of-Plane Behavior of Two RC Bearing Walls under Fire: A Full-Scale Experimental Investigation,” ACI Structural Journal, V. 111, No. 5, Sept.-Oct. 2014, pp. 1101-1110. doi: 10.14359/51686814
3. Mueller, K., and Kurama, Y., “Out-of-Plane Behavior and Stability of Five Planar RC Bearing Wall Specimens under Fire,” ACI Structural Journal, V. 112, No. 6, Nov.-Dec. 2015, pp. 701-712. doi: 10.14359/51687908
4. ASTM E119, “Standard Test Methods for Fire Tests of Building Construction and Materials,” ASTM International, West Conshohocken, PA, 2018.
5. Franssen, J., “SAFIR: A Thermal/Structural Program Modelling Structures under Fire,” Engineering Journal (New York), V. 42, No. 3, 2005, pp. 143-158.
6. Franssen, J., “User’s Manual for SAFIR 2013b2: A Computer Program for Analysis of Structures Subjected to Fire,” University of Liège, Liège, Belgium, 2012.
7. O’Meagher, A., and Bennetts, I., “Modelling of Concrete Walls in Fire,” Fire Safety Journal, V. 17, No. 4, 1991, pp. 315-335. doi: 10.1016/0379-7112(91)90026-U
8. Lee, C.; Lee, S.; and Kim, H., “Experimental Observations on Reinforced Concrete Bearing Walls Subjected to All-Sided Fire Exposure,” Magazine of Concrete Research, V. 65, No. 2, 2013, pp. 82-92. doi: 10.1680/macr.12.00013
9. Lee, S., and Lee, C., “Fire Resistance of Reinforced Concrete Bearing Walls Subjected to All-Sided Fire Exposure,” Materials and Structures, V. 46, No. 6, 2013, pp. 943-957. doi: 10.1617/s11527-012-9945-8
10. Lakhani, H.; Kamath, P.; Bhargava, P.; Sharma, U.; and Reddy, G., “Thermal Analysis of Reinforced Concrete Structural Elements,” Journal of Structural Fire Engineering, V. 4, No. 4, 2013, pp. 227-243. doi: 10.1260/2040-2317.4.4.227
11. Dwaikat, M., and Kodur, V., “Hydrothermal Model for Predicting Fire-induced Spalling in Concrete Structural Systems,” Fire Safety Journal, V. 44, No. 3, 2008, pp. 425-434. doi: 10.1016/j.firesaf.2008.09.001
12. Dotreppe, J., and Franssen, J., “Use of Numerical Models for the Fire Analysis of Reinforced Concrete and Composite Structures,” Engineering Analysis, V. 2, No. 2, 1985, pp. 67-74. doi: 10.1016/0264-682X(85)90056-5
13. Bratina, S.; Cas, B.; Saje, M.; and Planinc, I., “Numerical Modelling of Behavior of Reinforced Concrete Columns in Fire and Comparison with Eurocode 2,” International Journal of Solids and Structures, V. 42, No. 21-22, 2005, pp. 5715-5733. doi: 10.1016/j.ijsolstr.2005.03.015
14. Dotreppe, J.; Franssen, J.; and Vanderzeypen, Y., “Calculation Methods for Design of Reinforced Concrete Columns Under Fire Conditions,” ACI Structural Journal, V. 96, No. 1, Jan.-Feb. 1999, pp. 9-18.
15. Terro, M., “Numerical Modeling of the Behavior of Concrete Structures in Fire,” ACI Structural Journal, V. 95, No. 2, Mar.-Apr. 1998, pp. 183-193.
16. Bažant, Z.; Chern, J.; and Thonguthai, W., “Finite Element Program for Moisture and Heat Transfer in Heated Concrete,” Nuclear Engineering and Design, V. 68, No. 1, 1981, pp. 61-70. doi: 10.1016/0029-5493(82)90040-1
17. Chung, J., and Consolazio, G., “Numerical Modeling of Transport Phenomena in Reinforced Concrete Exposed to Elevated Temperatures,” Cement and Concrete Research, V. 35, No. 3, 2005, pp. 597-608. doi: 10.1016/j.cemconres.2004.05.037
18. Selih, J.; Sousa, A.; and Bremner, T., “Moisture and Heat Flow in Concrete Walls Exposed to Fire,” Journal of Engineering Mechanics, ASCE, V. 120, No. 10, 1994, pp. 2028-2043. doi: 10.1061/(ASCE)0733-9399(1994)120:10(2028)
19. Tenchev, R.; Li, L.; and Purkiss, J., “Finite Element Analysis of Coupled Heat and Moisture Transfer in Concrete Subjected to Fire,” Numerical Heat Transfer, Part A,” Applications, V. 39, No. 7, 2001, pp. 685-710. doi: 10.1080/10407780152032839
20. Davie, C.; Pearce, C.; and Bicanic, N., “Coupled Heat and Moisture Transport in Concrete at Elevated Temperatures—Effects of Capillary Pressure and Adsorbed Water,” Numerical Heat Transfer, Part A,” Applications, V. 49, No. 8, 2006, pp. 733-763. doi: 10.1080/10407780500503854
21. Gawin, D.; Pesavento, F.; and Schrefler, B., “Modeling of Hygro-thermal Behaviour of Concrete at High Temperature with Thermo-chemical and Mechanical Material Degradation,” Computer Methods in Applied Mechanics and Engineering, V. 192, No. 13-14, 2003, pp. 1731-1771. doi: 10.1016/S0045-7825(03)00200-7
22. Tenchev, R., and Purnell, P., “An Application of a Damage Constitutive Model to Concrete at High Temperature and Prediction of Spalling,” International Journal of Solids and Structures, V. 42, No. 26, 2005, pp. 6550-6565. doi: 10.1016/j.ijsolstr.2005.06.016
23. Bažant, Z., and Kaplan, M., Concrete at High Temperatures: Material Properties and Mathematical Models, Longman, Harlow, UK, 1996.
24. Gawin, D.; Majorana, C.; and Schrefler, B., “Numerical Analysis of Hydro-thermal Behaviour and Damage of Concrete at High Temperature,” Mechanics of Cohesive-Frictional Materials, V. 4, No. 1, 1999, pp. 37-74. doi: 10.1002/(SICI)1099-1484(199901)4:13.0.CO;2-S
25. Gawin, D.; Pesavento, F.; and Schrefler, B., “Towards Prediction of the Thermal Spalling Risk through a Multi-Phase Porous Media Model of Concrete,” Computer Methods in Applied Mechanics and Engineering, V. 195, No. 41-43, 2006, pp. 5707-5729. doi: 10.1016/j.cma.2005.10.021
26. Witek, A.; Gawin, D.; Pesavento, F.; and Schrefler, B., “Finite Element Analysis of Various Methods for Protection of Concrete Structures Against Spalling during Fire,” Computational Mechanics, V. 39, No. 3, 2007, pp. 271-292. doi: 10.1007/s00466-005-0024-7
27. Davie, C.; Pearce, C.; and Bicanic, N., “A Fully Generalised, Coupled, Multi-phase, Hygro-thermo-mechanical Model for Concrete,” Materials and Structures, V. 43, 2010, pp. 13-33. doi: 10.1617/s11527-010-9591-y
28. Zhang, H., and Davie, C., “A Numerical Investigation of the Influence of Pore Pressures and Thermally Induced Stresses for Spalling of Concrete Exposed to Elevated Temperatures,” Fire Safety Journal, V. 59, 2013, pp. 102-110. doi: 10.1016/j.firesaf.2013.03.019
29. Mounajed, G., and Obeid, W., “A New Coupling FE Model for the Simulation of Thermal-Hydro-Mechanical Behaviour of Concretes at High Temperatures,” Materials and Structures, V. 37, No. 270, 2004, pp. 422-432. doi: 10.1617/13975
30. ASTM A615/A615M, “Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2018.
31. Abaqus/CAE, Vers. 6.9, Providence, RI: Dassault Systèmes Simulia Corporation, 2009.
32. Mueller, K., “Out-of-Plane Strength, Stability, and Behavior of Reinforced Concrete Bearing Walls during and after Elevated Temperatures from Fire,” dissertation, University of Notre Dame, Civil Engineering and Geological Sciences, Notre Dame, IN, 2017.
33. Jowsey, A.; Torero, J.; and Usmani, A., “Modelling of Structures in Fire: An Example of the Boundary Condition,” International Technical Congress, Computational Simulation Models in Fire Engineering and Research, Santander, Spain, 2004, pp. 297-313.
34. Eurocode 1, “General Actions – Actions on Structures Exposed to Fire,” EN1991-1-2, Commission of European Communities, Brussels, Belgium, 2001.
35. SFPE, Handbook of Fire Protection Engineering, fifth edition, Springer, 2016.
36. Eurocode 2, “Design of Concrete Structures. Part 1.2: General Rules – Structural Fire Design,” EN1992-1-2, Commission of European Communities, Brussels, Belgium, 2004.
37. Kodur, V. K. R., and Sultan, M. A., “Effect of Temperature on Thermal Properties of High-Strength Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 15, No. 2, 2003, pp. 101-107. doi: 10.1061/(ASCE)0899-1561(2003)15:2(101)
38. Gernay, T., and Franssen, J., “A Formulation of the Eurocode 2 Concrete Model at Elevated Temperature that includes an Explicit Term for Transient Creep,” Fire Safety Journal, V. 51, 2012, pp. 1-9. doi: 10.1016/j.firesaf.2012.02.001
39. Incropera, F., and DeWitt, D., Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Inc., Hoboken, NJ, 2002.
40. Prakash, V.; Powell, G.; and Campbell, S., “DRAIN-2DX Base Program Description and User Guide; Vers. 1.10,” University of California, Berkeley, Research Report UCB/SEMM-93/17, 1993.