DATE: August 18, 2020
TIME: 1:00 pm to 2:00 pm EDT
Continuing Education Credit: 0.1 CEU (1.0 PDH)
Approved by AIA and ICC
Access Period: 30 days
CEU (PDH) REQUIREMENTS:
To earn CEU (PDH) credit, individuals must purchase the webinar and attend the live webinar for the entire duration (or pass the quiz available after the webinar).
Detailed Webinar Instructions
This guide is intended for the planning, design, and construction of reinforced concrete structures in new low-rise buildings of restricted occupancy, number of stories, and area. The Guide is based ACI 318-14 and ACI IPS-1, “Essential Requirements for Reinforced Concrete Buildings.” The initial drafting of ACI IPS-1 (2002) was motivated by frequent worldwide discussions that reinforced concrete codes might be unnecessarily sophisticated for some applications, such as small low-rise buildings. Although the information presented was developed to produce, when properly used, a reinforced concrete structure with an appropriate margin of safety. For the structure designed by the guide to attain the intended margin of safety, the guide should be used as a whole, and alternative procedures should be used only when explicitly permitted in the guide. The minimum dimensioning prescribed in the guide replace, in most cases, more detailed procedures prescribed in the supporting codes and standards listed in 1.4. This guide presents: (a) Information in the order needed in the course of a design; (b) Explanatory material at appropriate places; (c) Computations only requiring a hand calculator; (d) Graphs and graphical explanations; (e) Design information based on simplified strength models; (f) Other limit states accounted for by minimum dimensions; (g) Conservative loads and simplified analysis guidelines; (h) Simplified geotechnical information to help define soil-bearing capacity; (i) Shear walls as the seismic force-resisting system; and (j) Material and construction guidelines based on commonly available steel grades and medium-strength concrete that can be site mixed.
Table of Contents
1. Describe common reinforcement detailing requirements, such as minimum cover requirements for concrete exposed to earth or weather, bend diameter requirements for deformed bars, and splice length requirements for tension bars and compression bars.
2. Explain the properties of different types of floor systems: flat slab floor system, slab-on-girder floor system, joist floor system, two-way joist system. Explain advantages and disadvantages.
3. Explain dimensional requirements and reinforcement details for columns including how the design should be performed and the requirements for columns in seismic zones should be met.
4. Explain the minimum longitudinal and transverse reinforcement required in structural walls and describe splice requirements of vertical and transverse wall reinforcement, including how the minimum amount of reinforced concrete structural walls for factored lateral-force resistance should be computed.
Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.
Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.
Subscriptions These items are not eligible for return.
Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 – ACICustomerService@concrete.org).