Table of Contents
117-10 Reapproved 2015 Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary, Part 1
117.1R-14 Guide for Tolerance Compatibility in Concrete Construction, Part 1
121R-08 Guide for Concrete Construction Quality Systems in Conformance with ISO 9001, Part 1
121.1R-16 Guide to Quality Management Auditing in the Concrete Industry, Part 1
122R-14 Guide to Thermal Properties of Concrete and Masonry Systems, Part 1
130R-19 Report on the Role of Materials in Sustainable Concrete Construction, Part 1
131.1R-14 Information Delivery Manual (IDM) for Cast-in-Place Concrete, Part 1
131.2R-17 Guide to Use of Industry Foundation Classes in Exchange of Reinforcement Models, Part 1
132R-14 Guide for Responsibility in Concrete Construction, Part 1
201.1R-08 Guide for Conducting a Visual Inspection of Concrete in Service, Part 1
201.2R-16 Guide to Durable Concrete, Part 1
201.3T-19 Joint Deterioration and Chloride-Based Deicing Chemicals, Part 1
207.1R-05 Reapproved 2012 Guide to Mass Concrete, Part 1
207.2R-07 Report on Thermal and Volume Change Effects on Cracking of Mass Concrete, Part 1
207.3R-18 Report on Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions, Part 1
207.4R-20 Report on Cooling and Insulating Systems for Mass Concrete, Part 1
207.5R-11 Report on Roller-Compacted Mass Concrete, Part 1
207.6R-17 Report on the Erosion of Concrete in Hydraulic Structures, Part 1
209R-92 Reapproved 2008 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, Part 1
209.2R-08 Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete, Part 1
211.1-91 Reapproved 2009 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, Part 1
211.4R-08 Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials, Part 1
211.5R-14 Guide for Submittal of Concrete Proportions, Part 1
211.6T-14 Aggregate Suspension Mixture Proportioning Method, Part 1
211.7R-20 Guide for Proportioning Concrete Mixtures with Ground Calcium Carbonate and Other Mineral Fillers, Part 1
211.8R-15 Guide to Troubleshooting Concrete Mixture Issues as Influenced by Constitutive Materials, Jobsite Conditions, or Testing Practices, Part 1
211.9R-18 Guide to Selecting Proportions for Pumpable Concrete, Part 1
212.3R-16 Report on Chemical Admixtures for Concrete, Part 1
213R-14 Guide for Structural Lightweight-Aggregate Concrete, Part 1
214R-11 Reapproved 2019 Guide to Evaluation of Strength Test Results of Concrete, Part 1
PRC-214.4-21 Obtaining Cores and Interpreting Core Compressive Strength Results—Guide, Part 1
216.1-14 Reapproved 2019 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies, Part 1
221R-96 Reapproved 2001 Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete, Part 1
221.1R-98 Reapproved 2008 Report on Alkali-Aggregate Reactivity, Part 1
222R-19 Guide to Protection of Reinforcing Steel in Concrete against Corrosion, Part 1
222.2R-14 Report on Corrosion of Prestressing Steels, Part 1
222.3R-11 Guide to Design and Construction Practices to Mitigate Corrosion of Reinforcement in Concrete Structures, Part 1
PRC-223-21 Shrinkage-Compensating Concrete—Guide, Part 2
224R-01 Reapproved 2008 Control of Cracking in Concrete Structures, Part 2
224.1R-07 Causes, Evaluation, and Repair of Cracks in Concrete Structures, Part 2
224.2R-92 Reapproved 2004 Cracking of Concrete Members in Direct Tension, Part 2
224.3R-95 Reapproved 2013 Joints in Concrete Construction, Part 2
224.4R-13 Guide to Design Detailing to Mitigate Cracking, Part 2
225R-19 Guide to the Selection and Use of Hydraulic Cements, Part 2
225.1T-20 TechNote: Removal of Optional Alkali Limit in Standard Specifications for Portland Cement, Part 2
228.1R-19 Report on Methods for Estimating In-Place Concrete Strength, Part 2
228.2R-13 Report on Nondestructive Test Methods for Evaluation of Concrete in Structures, Part 2
229R-13 Report on Controlled Low-Strength Materials, Part 2
230.1R-09 Report on Soil Cement, Part 2
231R-10 Reapproved 2020 Report on Early-Age Cracking: Causes, Measurement, and Mitigation, Part 2
232.1R-12 Report on the Use of Raw or Processed Natural Pozzolans in Concrete, Part 2
232.2R-18 Report on the Use of Fly Ash in Concrete, Part 2
232.3R-14 Report on High-Volume Fly Ash Concrete for Structural Applications, Part 2
232.4T-20 TechNote: Limits on the Proportions of Fly Ash in Concrete, Part 2
233R-17 Guide to the Use of Slag Cement in Concrete and Mortar, Part 2
234R-06 Reapproved 2012 Guide for the Use of Silica Fume in Concrete, Part 2
237R-07 Reapproved 2019 Self-Consolidating Concrete, Part 2
PRC-237.2-21 Self-Consolidating Concrete Form Pressure: Primary Factors and Prediction Models—Report, Part 2
238.1R-08 Report on Measurements of Workability and Rheology of Fresh Concrete, Part 2
238.2T-14 Concrete Thixotropy, Part 2
239R-18 Ultra-High-Performance Concrete: An Emerging Technology Report, Part 2
241R-17 Report on the Application of Nanotechnology and Nanomaterials in Concrete, Part 2
301-20 Specifications for Structural Concrete, Part 2
302.1R-15 Guide to Concrete Floor and Slab Construction, Part 2
302.2R-06 Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials, Part 2
303R-12 Guide to Cast-in-Place Architectural Concrete Practice, Part 2
304R-00 Reapproved 2009 Guide for Measuring, Mixing, Transporting, and Placing Concrete, Part 2
304.2R-17 Guide to Placing Concrete by Pumping Methods, Part 2
304.3R-20 Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing, Part 2
304.4R-20 Guide to Placing Concrete with Belt Conveyors, Part 2
304.6R-09 Reapproved 2019 Guide for Use of Volumetric-Measuring and Continuous-Mixing Concrete Equipment, Part 2
305R-20 Guide to Hot Weather Concreting, Part 2
305.1-14 Reapproved 2020 Specification for Hot Weather Concreting, Part 2
306R-16 Guide to Cold Weather Concreting, Part 2
306.1-90 Reapproved 2002 Standard Specification for Cold Weather Concreting, Part 2
307-08 Code Requirements for Reinforced Concrete Chimneys (ACI 307-08) and Commentary, Part 2
308R-16 Guide to External Curing Concrete of Concrete, Part 2
(308-213)R-13 Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight Aggregate, Part 3
308.1-11 Specification for Curing Concrete, Part 3
309R-05 Guide for Consolidation of Concrete, Part 3
309.1R-08 Report on Behavior of Fresh Concrete During Vibration, Part 3
309.2R-15 Guide to Identification and Control of Visible Surface Effects of Consolidation on Formed Concrete Surfaces, Part 3
309.5R-00 Reapproved 2006 Compaction of Roller-Compacted Concrete, Part 3
310R-19 Guide to Decorative Concrete, Part 3
310.1-20 Specification for Polished Concrete Slab Finishes, Part 3
311.4R-05 Guide for Concrete Inspection, Part 3
311.6-18 Specification for Testing Ready Mixed Concrete, Part 3
311.7-18 Specification for Inspection of Concrete Construction, Part 3
313-16 Design Specification for Concrete Silos and Stacking Tubes for Storing Granular Materials (ACI 313-16) and Commentary, Part 3
314R-16 Guide to Simplified Design for Reinforced Concrete Buildings, Part 3
315R-18 Guide to Presenting Reinforcing Steel Design Details, Part 3
318-19 Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19), stand-alone part with Index and Terminology
318.2-19 Building Code Requirements for Concrete Thin Shells (ACI 318.2-19) and Commentary (ACI 318.2R-19), Part 3
325.9R-15 Guide for Construction of Concrete Pavements, Part 3
325.11R-19 Report on Accelerated Techniques for Concrete Paving, Part 3
325.12R-02 Reapproved 2019 Guide for Design of Jointed Concrete Pavements for Streets and Local Roads, Part 3
325.13R-06 Reapproved 2019 Concrete Overlays for Pavement Rehabilitation, Part 3
325.14R-17 Guide for Design and Proportioning of Concrete Mixtures for Pavements, Part 3
327R-14 Guide to Roller-Compacted Concrete Pavements, Part 3
PRC-327.1-21 In-Place Density Testing of Freshly Placed Roller-Compacted Concrete by Nuclear Gauge Testing—TechNote, Part 3
329R-14 Report on Performance-Based Requirements for Concrete, Part 3
329.1T-18 Minimum Cementitious Materials Content in Specifications, Part 3
PRC-330-21 Commercial Concrete Parking Lots and Site Paving Design and Construction—Guide, Part 3
330.1-14 Reapproved 2020 Specification for Unreinforced Concrete Parking Lots and Site Paving, Part 3
330.2R-17 Reapproved 2020 Guide for the Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities, Part 3
332-20 Code Requirements for Residential Concrete (ACI 332-20) and Commentary, Part 3
332.1R-18 Guide to Residential Concrete Construction, Part 3
334.1R-92 Reapproved 2002 Concrete Shell Structures—Practice and Commentary, Part 3
334.3R-05 Reapproved 2020 Construction of Concrete Shells Using Inflated Forms, Part 3
336.1-01 Specification for the Construction of Drilled Piers, Part 3
336.3R-14 Report on Design and Construction of Drilled Piers, Part 3
341.2R-14 Report on Analysis and Design of Seismic-Resistant Concrete Bridge Systems, Part 3
341.3R-07 Seismic Evaluation and Retrofit Techniques for Concrete Bridges, Part 3
341.4R-16 Report on the Seismic Design of Bridge Columns Based on Drift, Part 3
342R-16 Report on Flexural Live Load Distribution Methods for Evaluating Existing Bridges, Part 3
343R-95 Reapproved 2004 Analysis and Design of Reinforced Concrete Bridge Structures, Part 4
343.1R-12 Guide for the Analysis and Design of Reinforced and Prestressed Concrete Guideway Structures, Part 4
345R-11 Guide for Concrete Highway Bridge Deck Construction, Part 4
345.1R-16 Guide to Maintenance of Concrete Bridge Members, Part 4
345.2R-13 Guide for Widening Highway Bridges, Part 4
347R-14 Guide to Formwork for Concrete, Part 4
347.2R-17 Guide for Shoring/Reshoring of Concrete Multistory Buildings, Part 4
347.3R-13 Guide to Formed Concrete Surfaces, Part 4
349-13 Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary, Part 4
349.1R-07 Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures, Part 4
349.2R-07 Reapproved 2020 Concrete Capacity Design (CCD) Method—Embedment Design Examples—Guide, Part 4
349.3R-18 Report on Evaluation and Repair of Existing Nuclear Safety-Related Concrete Structures, Part 4
350-20 Code Requirements for Environmental Engineering Concrete Structures (ACI 350-20) and Commentary, Part 4
350.1-10 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures (ACI 350.1-10) and Commentary, Part 4
PRC-350.2-21 Concrete Structures for Containment of Hazardous Materials, Part 4
350.3-20 Seismic Design of Liquid-Containing Concrete Structures (ACI 350.3-20) and Commentary, Part 4
350.4R-04 Design Considerations for Environmental Engineering Concrete Structures, Part 4
350.5-12 Specifications for Environmental Concrete Structures, Part 5
351.1R-12 Report on Grouting between Foundations and Bases for Support of Equipment and Machinery, Part 5
351.2R-10 Reapproved 2020 Report on Foundations for Static Equipment, Part 5
351.3R-18 Report on Foundations for Dynamic Equipment, Part 5
351.4-14 Specification for Installation of Cementitious Grouting between Foundations and Equipment Bases, Part 5
351.5-15 Specification for Installation of Epoxy Grout between Foundations and Equipment Bases, Part 5
352R-02 Reapproved 2010 Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, Part 5
352.1R-11 Guide for Design of Slab-Column Connections in Monolithic Concrete Structures, Part 5
355.2-19 Qualification of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-19) and Commentary, Part 5
355.4-19 Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-11) and Commentary, Part 5
357R-84 Reapproved 1997 Guide for the Design and Construction of Fixed Offshore Concrete Structures, Part 5
357.2R-10 Report on Floating and Float-In Concrete Structures, Part 5
357.3R-14 Guide for Design and Construction of Waterfront and Coastal Concrete Marine Structures, Part 5
359-17 Code for Concrete Containments (Synopsis only), Part 5
360R-10 Guide to Design of Slabs-on-Ground, Part 5
362.1R-12 Guide for the Design and Construction of Durable Concrete Parking Structures, Part 5
PRC-362.2-21 Parking Structure Structural Maintenance—Guide, Part 5
363R-10 Report on High-Strength Concrete, Part 5
363.2R-11 Guide to Quality Control and Assurance of High-Strength Concrete, Part 5
364.1R-19 Guide for Assessment of Concrete Structures before Rehabilitation, Part 5
PRC-364.2-21 Increasing Shear Capacity within Existing Reinforced Concrete Structures—TechNote, Part 5
364.3R-09 Guide for Cementitious Repair Material Data Sheet, Part 5
364.3T-15 Treatment of Exposed Epoxy-Coated Reinforcement in Repair, Part 5
PRC-364.4-21 Determining the Load Capacity of a Structure When Structural Drawings are Unavailable—TechNote, Part 5
PRC-364.5-21 Importance of Modulus of Elasticity in Surface Repair Materials—TechNote, Part 5
364.6T-02 Reapproved 2011 Concrete Removal in Repairs Involving Corroded Reinforcing Steel, Part 5
PRC-364.7-21 Evaluation and Minimization of Bruising in Concrete Repair—TechNote, Part 5
364.8T-02 Reapproved 2011 Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems, Part 5
PRC-364.9-21 Cracks in a Concrete Repair—TechNote, Part 5
364.10T-14 Rehabilitation of Structure with Reinforcement Section Loss, Part 5
364.11T-15 Managing Alkali-Aggregate Reaction Expansion in Mass Concrete, Part 5
364.12T-15 Repair of Leaking Cracks in Walls of Liquid Containment Structures, Part 5
364.13T-15 Repairs for Reinforcement with Shallow Cover, Part 5
364.14T-17 Section Loss Determination of Damaged or Corroded Reinforcing Steel Bars, Part 5
364.15T-18 Significance of the Shrinkage-Compensating and Nonshrink Labels on Packaged Repair Materials, Part 5
364.16T-18 Physical Properties and Characteristics Affecting the Sensitivity to Cracking of Cementitious Repair Materials, Part 5
364.17T-18 How to Measure pH of a Concrete Surface prior to Installation of a Floor Covering, Part 5
365.1R-17 Report on Service Life Prediction, Part 5
369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary, Part 5
369.1-17 Standard Requirements for Seismic Evaluation and Retrofit of Exisiting Concrete Buildings (ACI 369.1-17) and Commentary, Part 5
370R-14 Report for the Design of Concrete Structures for Blast Effects, Part 5
371R-16 Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel-Concrete Water Storage Tanks, Part 5
372R-13 Guide to Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures, Part 5
374.1-05 Reapproved 2019 Acceptance Criteria for Moment Frames Based on Structural Testing (ACI 374.1-05) and Commentary, Part 5
374.2R-13 Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic Loads, Part 5
374.3R-16 Guide to Nonlinear Modeling Parameters for Earthquake-Resistant Structures, Part 5
376-11 Code Requirements for Design and Construction of Concrete Structures for the Containment of Refrigerated Liquefied Gases (ACI 376-11) and Commentary, Part 5
PRC-377-21 Integrity and Collapse Resistance of Structural Concrete Floor Systems—Report, Part 6
408R-03 Reapproved 2012 Bond and Development of Straight Reinforcing Bars in Tension, Part 6
408.2R-12 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads, Part 6
408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension and Commentary, Part 6
421.1R-20 Guide to Shear Reinforcement for Slabs, Part 6
PRC-421.2-21 Seismic Design of Punching Shear Reinforcement in Flat Plates—Guide, Part 6
421.3R-15 Guide to Design of Reinforced Two-Way Slab Systems, Part 6
423.3R-17 Recommendations for Concrete Members Prestressed with Single-Strand Unbonded Tendons, Part 6
423.4R-14 Report on Corrosion and Repair of Unbonded Single-Strand Tendons, Part 6
423.7-14 Specification for Unbonded Single-Strand Tendon Materials, Part 6
PRC-423.8-21 Corrosion and Repair of Post-Tensioning Tendon Systems—Report, Part 6
423.10R-16 Guide to Estimating Prestress Losses, Part 6
435R-20 Report on Deflection of Nonprestressed Concrete Structures, Part 6
435.8R-85 Reapproved 1997 Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections (Synopsis only), Part 6
437R-19 Strength Evaluation of Existing Concrete Buildings, Part 6
437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance Criteria, Part 6
437.2-13 Code Requirements for Load Testing of Existing Concrete Structures (ACI 437.2-13) and Commentary, Part 6
439.3R-07 Types of Mechanical Splices for Reinforcing Bars, Part 6
439.4R-09 Reapproved 2017 Report on Steel Reinforcement—Material Properties and U.S. Availability, Part 6
439.5R-18 Guide for the Specification, Manufacture, and Construction Use of Welded Wire Reinforcement, Part 6
439.6R-19 Guide for the Use of ASTM A1035/A1035M Type CS Grade 100 (690) Steel Bars for Structural Concrete, Part 6
440R-07 Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, Part 6
440.1R-15 Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars, Part 6
440.2R-17 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Part 6
440.3R-12 Guide Test Methods for Fiber-Reinforced Polymer (FRP) Composites for Reinforcing or Strengthening Concrete and Masonry Structures, Part 6
440.4R-04 Reapproved 2011 Prestressing Concrete Structures with FRP Tendons, Part 6
440.5-08 Specification for Construction with Fiber-Reinforced Polymer Reinforcing Bars, Part 6
440.6-08 Reapproved 2017 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement, Part 6
440.7R-10 Guide for the Design and Construction of Externally Bonded Fiber-Reinforced Polymer Systems for Strengthening Unreinforced Masonry Structures, Part 6
440.8-13 Specification for Carbon and Glass Fiber-Reinforced Polymer (FRP) Materials Made by Wet Layup for External Strengthening of Concrete and Masonry Structures, Part 6
440.9R-15 Guide to Accelerated Conditioning Protocols for Durability Assessment of Internal and External Fiber-Reinforced Polymer (FRP) Reinforcement, Part 6
PRC-440.10-21 Fire Resistance of FRP-Strengthening Concrete Members—TechNote, Part 6
441R-96 High-Strength Concrete Columns, Part 6
441.1R-18 Report on Equivalent Rectangular Concrete Stress Block and Transverse Reinforcement for High-Strength Concrete Columns, Part 6
PRC-444.2-21 Concrete Structure Structural Health Monitoring Technologies—Report, Part 6
445R-99 Reapproved 2015 Recent Approaches to Shear Design of Structural Concrete, Part 6
445.1R-12 Reapproved 2021 Report on Torsion in Structural Concrete, Part 6
PRC-445.2-21 Strut-and-Tie Method Guidelines for ACI 318-19—Guide, Part 6
446.1R-91 Reapproved 1999 Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties (Synopsis only), Part 6
446.3R-97 Finite Element Analysis of Fracture in Concrete Structures, Part 7
447R-18 Design Guide for Twisting Moments in Slabs, Part 7
447.1R-18 Report on the Modeling Techniques Used in Finite Element Simulations of Concrete Structures Strengthened Using Fiber-Reinforced Polymer (FRP) Materials, Part 7
503.3-10 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate, Part 7
503.4-92 Reapproved 2003 Standard Specification for Repairing Concrete with Epoxy Mortars, Part 7
503.5R-92 Reapproved 2003 Guide for the Selection of Polymer Adhesives with Concrete, Part 7
506R-16 Guide to Shotcrete, Part 7
PRC-506.1-21 Fiber-Reinforced Shotcrete—Guide, Part 7
506.2-13 Reapproved 2018 Specification for Shotcrete, Part 7
506.4R-19 Guide for the Evaluation of Shotcrete, Part 7
506.5R-09 Reapproved 2016 Guide for Specifying Underground Shotcrete, Part 7
506.6T-17 Visual Shotcrete Core Quality Evaluation, Part 7
515.2R-13 Guide to Selecting Protective Treatments for Concrete, Part 7
515.3R-20 Guide for Assessment and Surface Preparation for Application of Protection Systems for Concrete, Part 7
522R-10 Reapproved 2011 Report on Pervious Concrete, Part 7
522.1-20 Specification for Construction of Pervious Concrete Pavement, Part 7
523.1R-06 Guide for Cast-in-Place Low-Density Cellular Concrete, Part 7
523.2R-96 Guide for Precast Cellular Concrete Floor, Roof, and Wall Units, Part 7
523.3R-14 Guide for Cellular Concretes above 50 lb/ft3 (800 kg/m3), Part 7
524R-16 Guide to Portland Cement-Based Plaster, Part 7
526R-19 Guide for Design and Construction with Autoclaved Aerated Concrete Panels, Part 7
530-13/TMS 402-13/ASCE 5-13 Building Code Requirements and Specification for Masonry Structures, Part 7
533R-11 Reapproved 2021 Guide for Precast Concrete Wall Panels, Part 7
533.1R-20 Guide for Design and Construction Responsibilities for Architectural Precast Concrete, Part 7
533.5R-20 Guide for Precast Concrete Tunnel Segments, Part 7
543R-12 Guide to Design, Manufacture, and Installation of Concrete Piles, Part 7
544.1R-96 Reapproved 2009 Report on Fiber Reinforced Concrete, Part 7
544.2R-17 Report on the Measurement of Fresh State Properties and Fiber Dispersion of Fiber-Reinforced Concrete, Part 7
544.3R-08 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete, Part 7
544.4R-18 Guide to Design with Fiber-Reinforced Concrete, Part 7
544.5R-10 Report on the Physical Properties and Durability of Fiber-Reinforced Concrete, Part 7
544.6R-15 Report on Design and Construction of Steel Fiber-Reinforced Concrete Elevated Slabs, Part 7
544.7R-16 Report on Design and Construction of Fiber-Reinforced Precast Concrete Tunnel Segments, Part 7
544.8R-16 Report on Indirect Method to Obtain Stress-Strain Response of Fiber-Reinforced Concrete (FRC), Part 8
544.9R-17 Report on Measuring Mechanical Properties of Hardened Fiber-Reinforced Concrete, Part 8
PRC-544.10-21 Fiber Effect on Reducing the Permeability of Cracked Concrete Structures—TechNote, Part 8
546R-14 Guide to Concrete Repair, Part 8
546.2R-20 Guide to Underwater Repair of Concrete, Part 8
546.3R-14 Guide to Materials Selection for Concrete Repair, Part 8
546.4R-20 Guide for Jobsite Quality Control and Quality Assurance of Cementitious Packaged Materials, Part 8
548.1R-09 Guide for the Use of Polymers in Concrete, Part 8
548.3R-09 Report on Polymer-Modified Concrete, Part 8
548.4-11 Specification for Latex-Modified Concrete Overlays, Part 8
548.5R-16 Guide for Polymer Concrete Overlays, Part 8
548.6R-19 Polymer Concrete: Guidelines for Structural Applications, Part 8
548.8-19 Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for Bridge and Parking Garage Decks, Part 8
548.9-08 Specification for Type ES (Epoxy Slurry) Polymer Overlay for Bridge and Parking Garage Decks, Part 8
548.10-10 Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage Decks, Part 8
548.11R-12 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes, Part 8
548.12-12 Specification for Bonding Hardened Concrete and Steel to Hardened Concrete with an Epoxy Adhesive, Part 8
SPEC-548.13-21 Multi-Component Epoxy Adhesive for Bonding to Concrete—Specification, Part 8
548.14-14 Specification for Repairing Concrete with Epoxy Mortar, Part 8
548.15-20 Specification for Crack Repair by Epoxy Injection, Part 8
549R-18 Report on Ferrocement, Part 8
549.1R-18 Design Guide for Ferrocement, Part 8
549.3R-09 Reapproved 2017 Report on Glass Fiber-Reinforced Concrete Premix, Part 8
549.4R-20 Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix and Steel-Reinforced Grout Systems for Repair and Strengthening of Concrete Structures, Part 8
549.5R-16 Report on Spray-up and Continuous Strand Glass Fiber-Reinforced Concrete (GFRC), Part 8
549.6R-20 Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) and Steel-Reinforced Grout (SRG) Systems for Repair and Strengthening Masonry Structures, Part 8
550.1R-09 Reapproved 2017 Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures, Part 8
550.2R-13 Design Guide for Connections in Precast Jointed Systems, Part 8
550.3-13 Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI 374.1 (ACI 550.3-13) and Commentary, Part 8
550.4-18 Qualification of Precast Concrete Diaphragm Connections and Reinforcement at Joints for Earthquake Loading (ACI 550.4-18) and Commentary (ACI 550.4R-18), Part 8
550.5-18 Code Requirements for the Design of Precast Concrete Diaphragms for Earthquake Motions (ACI 550.5-18) and Commentary (ACI 550.5R-18), Part 8
550.6-19 Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing and Commentary, Part 8
550.7-19 Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI 550.6 (ACI 550.7) and Commentary, Part 8
551.1R-14 Guide to Tilt-Up Concrete Construction, Part 8
551.2R-15 Design Guide for Tilt-Up Concrete Panels, Part 8
PRC-551.3-21 Pitfalls of Deviating from ACI 318 Slender Wall Provisions—TechNote, Part 8
555R-01 Removal and Reuse of Hardened Concrete, Part 8
560R-16 Report on Design and Construction with Insulating Concrete Forms (ICFs), Part 8
CODE-562-21 Assessment, Repair, and Rehabilitation of Existing Concrete Structures—Code and Commentary, Part 8
563-18 Specifications for Repair of Concrete in Buildings (ACI 563-18), Part 8
ITG-4.3R-07 Report on Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications, Part 8
ITG-7-09 Specification for Tolerances for Precast Concrete, Part 8
ITG-9R-16 Report on Design of Concrete Wind Turbine Towers, Part 8
ITG-10R-18 Practitioner’s Guide for Alternative Cements, Part 8
ITG-10.1R-18 Report on Alternative Cements, Part 8