Seminar – ACI 318-19: Changes to the Concrete Design Standard

Currency Display

Your Price: $ 695.00 USD

Member Price: $ 595.00 USD

Save $ 100.00 USD, Become a Member


Dates and locations: Visit the Public Seminar Page

Start/End Time: 8am - 5pm (1-hour lunch; two 15-minute breaks)

Continuing Education Credit: 0.75 CEU (7.5 PDH) / Approved by AIA and ICC

Who should attend: Structural and civil engineers, designers, and consultants, inspectors, building officials

Books Included:

• 318-19: Building Code Requirements for Structural Concrete and Commentary

• Lecture notes

Price: $695 (non-member) / $595 (ACI member) / $150 student

Cancelation Policy: $75 fee if canceled within 7 days of the seminar


This seminar covers the major changes in the 2019 edition of ACI 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary. This edition is the first edition of ACI 318 in 5 years and the first update since the reorganization of the code in the 2014 edition.

All major changes in this edition of the code will be presented and discussed. This includes major changes centered around the topics of higher reinforcing steel yield strengths for many applications and the associated design provision changes; the addition of shotcrete provisions; deep foundation provisions; seismic requirements for deep foundations and other applications; vertical seismic motions; nonlinear analysis for seismic design; modification to development length equations; and updated shear design provisions and equations.

The new organization of the code started in the 2014 edition and additional enhancements to the code will be presented. These assist the designer in quickly locating the provisions they need and help assure users they are meeting all of the code requirements.

Specific topics covered in the seminar include the following:

• New provisions allowing the use of higher steel strengths along with changes to design provisions such as strength reduction factors, minimum reinforcement, and requirements for development and splice lengths of straight, hooked, and headed bars.

• Higher steel strength limits for shear walls and special moment frames with accompanying changes to lateral support of vertical reinforcement.

• Newly included and updated provisions related to shotcrete design and construction.

• Provisions governing nonlinear response history analysis for performance-based seismic design.

• Revised seismic design and detailing requirements for structural walls.

• Reduced column tie spacings for intermediate and special moment frames.

• Inclusion of IBC provisions for deep foundations, including seismic provisions, to expand the scope of deep foundations covered in the code.

• Consolidation and updating of one-way and two-way shear provisions.

• Changes to reinforcement and penetration requirements for two-way slabs.

• Removal of two-way slab design methods and shearhead provisions.

• Detailing and distribution requirement changes for transverse, integrity, and flange reinforcement.

• Modifications to requirements for prestressed concrete detailing and design.

• Revisions to strut-and-tie provisions.

• Simplification of shrinkage and temperature reinforcement provisions.

• Modification of load test provisions.

• Addition of screw anchor and shear lug provisions in Chapter 17.

• Use of alternative cementitious materials, crushed concrete, and recycled aggregate.

• Revisions to the definition of modulus of elasticity.

• Changes to the lightweight concrete modification factor.

• Addition of requirements governing the certification of personnel.

• Addition of commentary references to ACI 562 for repair issues.

• Changes to exposure categories and mixture proportioning requirements for durability.


Document Details


Categories: Codes

Table of Contents

Learning Objectives:

1. Understand where higher grades of reinforcement are accepted and changes to the requirements for structural concrete to allow the higher reinforcement grades, including development lengths and phi factors.

2. Identify the added requirements to address shotcrete as a concrete placement method.

3. Explain the expanded scope of deep foundation provisions, including seismic requirements.

4. Learn the new requirements for post-installed screw type anchors and shear lug design for anchoring to concrete.

5. Describe the changes to shear design provisions and equations.

6. Describe tension longitudinal reinforcement requirements in special structural walls

Keywords: admixtures; aggregates; anchorage (structural); beam-column frame; beams (supports); caissons; cements; cold weather; columns (supports); combined stress; composite construction (concrete to concrete); compressive strength; concrete; construction documents; construction joints; continuity (structural); contraction joints; cover; curing; deep beams; deep foundations; deflections; drilled piers; earthquake-resistant structures; flexural strength; floors; footings; formwork (construction); hot weather; inspection; isolation joints; joints (junctions); joists; lightweight concretes; load tests (structural); loads (forces); mixture proportioning; modulus of elasticity; moments; piles; placing; plain concrete; precast concrete; prestressed concrete; prestressing steels; quality control; reinforced concrete; reinforcing steels; roofs; serviceability; shear strength; shear walls; shotcrete; spans; splicing; strength analysis; stresses; structural analysis; structural design; structural integrity; T-beams; torsion; walls; water; welded wire reinforcement.


Any applicable errata are included with individual documents at the time of purchase. Errata are not included for collections or sets of documents such as the ACI Collection. For a listing of and access to all product errata, visit the Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: The full and complete returned product will be accepted if returned within 60 days of receipt and in salable condition. A 20% service charge applies. Return shipping fees are the customer’s responsibility.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.

Subscriptions These items are not eligible for return.

Exchanges: Contact ACI’s Customer Services Department for options (+1.248.848.3800 –

Please enter this 5 digit unlock code on the web page.