MCP-5(16): Manual of Concrete Practice Part 5 (2016)


  • The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

International Concrete Abstracts Portal


Title: MCP-5(16): Manual of Concrete Practice Part 5 (2016)


Publication: Technical Documents



Appears on pages(s): 1404


Date: 1/1/2016


Note: A newer version of this document exists. This document was replaced by MCP-5(17).

355.3R-11 Guide for Design of Anchorage to Concrete: Examples Using ACI 318 Appendix D 355.4-11 Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-11) and Commentary 357R-84 Reapproved 1997 Guide for the Design and Construction of Fixed Offshore Concrete Structures 357.2R-10 Report on Floating and Float-In Concrete Structures 357.3R-14 Guide for Design and Construction of Waterfront and Coastal Concrete Marine Structures 359-13 Code for Concrete Containments (Synopsis only) 360R-10 Guide to Design of Slabs-on-Ground 362.1R-12 Guide for the Design and Construction of Durable Parking Structures 362.2R-00 Reapproved 2013 Guide for Structural Maintenance of Parking Structures 363R-10 Report on High-Strength Concrete 363.2R-11 Guide to Quality Control and Assurance of High-Strength Concrete 364.1R-07 Guide for Evaluation of Concrete Structures before Rehabilitation 364.2T-08 Increasing Shear Capacity within Existing Reinforced Concrete Structures 364.3R-09 Guide for Cementitious Repair Material Data Sheet 364.3T-15 Treatment of Exposed Epoxy-Coated Reinforcement in Repair 364.4T-10 Determining the Load Capacity of a Structure when As-Built Drawings are Unavailable 364.5T-10 Importance of Modulus of Elasticity in Surface Repair Materials 364.6T-02 Reapproved 2011 Concrete Removal in Repairs Involving Corroded Reinforcing Steel 364.7T-02 Reapproved 2011 Evaluation and Minimization of Bruising (Microcracking) in Concrete Repair 364.8T-02 Reapproved 2011 Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems 364.9T-03 Reapproved 2011 Cracks in a Repair 364.10T-14 Rehabilitation of Structure with Reinforcement Section Loss 364.11T-15 Managing Alkali-Aggregate Reaction Expansion in Mass Concrete 364.12T-15 Repair of Leaking Cracks in Walls of Liquid Containment Structures 364.13T-15 Repair for Reinforcement with Shallow Cover 365.1R-00 Service-Life Prediction 369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary 370R-14 Report for the Design of Concrete Structures for Blast Effects 371R-08 Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel- Concrete Water Storage Tanks 372R-13 Guide to Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures 374.1-05 Reapproved 2014 Acceptance Criteria for Moment Frames Based on Structural Testing (ACI 374.1-05) and Commentary 374.2R-13 Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic Loads 376-11 Code Requirements for Design and Construction of Concrete Structures for the Containment of Refrigerated Liquefied Gases (ACI 376-11) and Commentary (Synopsis only) 408R-03 Reapproved 2012 Bond and Development of Straight Reinforcing Bars in Tension 408.2R-12 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads 408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension and Commentary 421.1R-08 Guide to Shear Reinforcement for Slabs 421.2R-10 Guide to Seismic Design of Punching Shear Reinforcement in Flat Plates 421.3R-15 Guide to Design of Reinforced Two-Way Slab Systems 423.3R-05 Recommendations for Concrete Members Prestressed with Unbonded Tendons 423.4R-14 Report on Corrosion and Repair of Unbonded Single-Strand Tendons 423.7-14 Specification for Unbonded Single-Strand Tendon Materials 423.8R-10 Report on Corrosion and Repair of Grouted Multistrand and Bar Tendon Systems 423.9M-10 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout 435R-95 Reapproved 2000 Control of Deflection in Concrete Structures 435.8R-85 Reapproved 1997 Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections (Synopsis only) 437R-03 Strength Evaluation of Existing Concrete Buildings 437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance Criteria 437.2-13 Code Requirements for Load Testing of Existing Concrete Structures (ACI 437.2-13) and Commentary 439.3R-07Types of Mechanical Splices for Reinforcing Bars 439.4R-09 Report on Steel Reinforcement—Material Properties and U.S. Availability 440R-07 Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures