MCP-5(13): Manual of Concrete Practice Part 5 (2013)


  • The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

International Concrete Abstracts Portal


Title: MCP-5(13): Manual of Concrete Practice Part 5 (2013)


Publication: Technical Documents



Appears on pages(s): 1078


Date: 2/11/2013


Note: A newer version of this document exists. This document was replaced by MCP-5(14).

2013 Version Includes Index of complete Manual of Concrete Practice Contents: 355.4-11 Qualification of Post-Installed Adhesive Anchors in Concrete and Commentary; 357R-84 (Reapproved 1997) Guide for the Design and Construction of Fixed Offshore Concrete Structures; 357.2R-10 Report on Floating and Float-In Concrete Structures; 358.1R-92 Analysis and Design of Reinforced and Prestressed-Concrete Guideway Structures; 359-07 Code for Concrete Containments (synopsis); 360R-06 Guide for Design of of Slabs-on-Ground; 362.1R-12 Guide for the Design and Construction of Durable Parking Structures; 362.2R-00 (Reapproved 2005) Guide for Structural Maintenance of Parking Structures; 363R-10 Report on High-Strength Concrete; 363.2R-11 Guide to Quality Control and Testing of High-Strength Concrete; 364.1R-07 Guide for Evaluation of Concrete Structures before Rehabilitation; 364.2T-08 Increasing Shear Capacity within Existing Reinofrced Concrete Structures; 364.3R-09 Guide for Cementitious Cementitious Repair Materials Data Sheet; 364.3T-10 Treatment of Exposed Epoxy-Coated Reinforcement in Repair; 364.4T-10 Determining the Load Capacity of a Structure when As-Built Drawings are Unavailable; 364.5T-10 Importance of Modulus of Elasticity of Repair Materials; 364.6T-02(Reapproved 2011) Concrete Removal in Repairs Involving Corroded Reinforcing Steel; 364.7T-02(Reapproved 2011) The Evaluation and Minimization of Bruising (Microcracking) in Concrete Repair; 364.8R-02(Reapproved 2011) Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems; 364.9R-03(Reapproved 2011) Cracks in a Repair; 365.1R-00 Service-Life Prediction; 369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary; 371R-08 Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel-Concrete Water Storage Tanks; 372R-03 Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures; 374.1-05 Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary; 376-11 Code Requirements for Design and Construction of Concrete Structures for the Containment of Refrigerated Liquefied Gases (ACI 376-11) and Commentary (abstract only); 408R-03 (Reapproved 2012) Bond and Development of Straight Reinforcing Bars in Tension; 408.2R-12 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads; 408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension; 421.1R-08 Guide to Shear Reinforcement for Slabs; 421.2R-10 Guide to Seismic Design of Punching Shear Reinforcement in Flat Plates; 423.3R-05 Recommendations for Concrete Members Prestressed with Unbonded Tendons; 423.4R-98 Corrosion and Repair of Unbonded Single-Strand Tendons; 423.7-07 Specification for Unbonded Single-Strand Tendon Materials (ACI 423.7-07) and Commentary; 423.8R-10 Report on Corrosion and Repair of Grouted Multistrand and Bar Tendon Systems; 423.9M-10 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout; 435R-95 (Reapproved 2000) Control of Deflection in Concrete Structures; 435.8R-85 (Reapproved 1997) Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections (synopsis only); 437R-03 Strength Evaluation of Existing Concrete Buildings; 437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance Criteria; 439.3R-07 Types of Mechanical Splices for Reinforcing Bars; 439.4R-09 Report on Steel Reinforcement—Material Properties and U.S. Availability; 440R-07 Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures