ABOUT THE INTERNATIONAL CONCRETE ABSTRACTS PORTAL

  • The International Concrete Abstracts Portal is an ACI led collaboration with leading technical organizations from within the international concrete industry and offers the most comprehensive collection of published concrete abstracts.

International Concrete Abstracts Portal

Showing 1-5 of 1290 Abstracts search results

Document: 

SP-341-02

Date: 

June 30, 2020

Author(s):

Sarah De Carufel and Hassan Aoude

Publication:

Symposium Papers

Volume:

341

Abstract:

This paper presents the results from tests examining the blast performance of columns constructed with ultra-high-performance concrete (UHPC) and high-performance reinforcement (high-strength steel or stainless steel). As part of the study six columns with square cross-sections were tested under simulated blast loads using a shock-tube at the University of Ottawa. Parameters investigated include the effects of concrete type, longitudinal reinforcement type and longitudinal reinforcement ratio. The results demonstrate that the use of UHPC increases the blast performance of reinforced concrete columns by increasing blast capacity and improving control of maximum and residual mid-span displacements by an average of 30% and 40%. Substitution of normal-strength bars with high-strength or stainless steel bars in the UHPC columns resulted in further reductions in displacements, which ranged between 18-43% for maximum deformations and 38-66% for residual deformations. The failure mode of all columns with low steel ratio of 1.24% (4 – No.3 bars) was tension bar rupture, regardless of steel type. Increasing the steel ratio from 1.24% to 1.84% (6 –No.3 bars) increased blast capacity and delayed failure. The use of increased amount of stainless steel bars was particularly effective, and transformed the failure mode from bar rupture to fiber pullout. The analytical study confirms that dynamic inelastic SDOF analysis can be used to reasonably predict the blast response of UHPC columns reinforced with varying steel types.


Document: 

SP-341-05

Date: 

June 30, 2020

Author(s):

Yu-Chen Ou, Samuel Y.L.Yin, Yi-Qing Liu, and Jui-Chen Wang

Publication:

Symposium Papers

Volume:

341

Abstract:

The use of unstressed Grade 1860 (MPa) seven-wire steel strands as longitudinal reinforcement in columns has the advantage of reducing the cost of steel as compared with conventional Grade 420 (MPa) deformed steel bars. A preliminary experimental study was conducted to investigate the performance of a column with unstressed seven-wire strands as longitudinal reinforcement. Large-scale column specimens were designed and tested using double-curvature lateral cyclic loading under a constant axial load. Test results showed that the column with strands as longitudinal reinforcement (RH1) showed less and wider cracks and less energy dissipation than the column with deformed bars as longitudinal reinforcement (ORH1). Despite this, RH1 showed a slightly higher drift capacity than ORH1 even when the strands used in RH1 had a much lower ultimate strain than the deformed bars used in ORH1.


Document: 

SP-341-11

Date: 

June 30, 2020

Author(s):

Ahmed Ibrahim, Sabreena Nasrin, and Riyadh Hindi

Publication:

Symposium Papers

Volume:

341

Abstract:

The spiral reinforcement is a special detailing technique used for reinforcing columns in regions of high seismic activities because of its ability in energy absorption and ductility. In this paper, the results of the experimental testing on cross spiral confinement in reinforced concrete columns are presented. The experimental results were verified by nonlinear finite element analysis as well as an analytical model. The developed analytical model was based on the octahedral stress criterion and compared with other models available in the literature. In the Finite element model, the concrete damage plasticity and steel yielding criterion were used in the constitutive equations. The finite element showed very good prediction of the ultimate load and failure strain for various spiral reinforcement ratios. Analytical stress-strain models have been developed and compared to the experiment results in the literature and found work well in predicting the columns behavior under monotonic axial loads. The authors see that the proposed technique is a very good potential of industry implementation and provides a more seismic resiliency to structures.

Such detailing technique could be used as a mitigation system for columns in high seismic zones.


Document: 

SP-341-06

Date: 

June 30, 2020

Author(s):

Mostafa Tazarv and M. Saiid Saiidi

Publication:

Symposium Papers

Volume:

341

Abstract:

Current seismic codes prevent bridge collapse under strong earthquakes. For conventional reinforced concrete (RC) bridges, this performance objective is usually achieved through confinement of ductile members such as columns. When an RC bridge column undergoes large displacements, its reinforcement yield and sometimes buckle, the cover concrete spalls, and the core concrete sometimes fail. Damage of reinforcement and core concrete is not easy to repair. Advanced materials and new technologies are emerging to enhance the seismic performance of RC bridge columns by reducing damage, increasing displacement capacities, and/or reducing permanent lateral displacements. Two types of advanced materials, shape memory alloy (SMA) bars and engineered cementitious composite (ECC), are the focus of the present study. SMA bars are viable reinforcement for concrete structures since they resist large stresses with minimal residual strains. Furthermore, ECC, which is a type of fiber-reinforced concrete, shows significant tensile strain capacities with minimal damage. SMA-reinforced ECC bridge columns are ductile with minimal damage and insignificant residual displacements under extreme events. A displacement-based design method for NiTi superelastic SMA-reinforced ECC bridge columns is proposed based on large-scale experimental and extensive analytical studies. A summary of the proposed guidelines, background information, and supporting studies are presented for this novel column type to facilitate field deployment. Finally, the details of the world first SMA-reinforced ECC bridge constructed in Seattle, USA, is discussed.


Document: 

SP-341-03

Date: 

June 30, 2020

Author(s):

Hyun-Oh Shin, Hassan Aoude and Denis Mitchell

Publication:

Symposium Papers

Volume:

341

Abstract:

Ultra-high-performance concrete (UHPC) is an innovative material that exhibits high compressive and tensile strength as well as excellent durability. The provision of fibers in UHPC results in improved ductility and increased toughness when compared to conventional high-strength concrete. These properties make UHPC well-adapted for use in the columns of high-rise buildings and heavily-loaded bridges. This paper summarizes the results from a database of tests examining the effects of various design parameters on the axial load performance of UHPC columns. Experimental results illustrating the effects of concrete type (UHPC vs. high-strength and ultra-high-strength concrete), UHPC compressive strength and transverse reinforcement detailing are presented. The results show that the use of UHPC in columns resulted in increased load carrying capacity and post peak ductility when compared to conventional high-strength or ultra-high-strength concrete due to the ability of steel fibers to delay cover spalling. However, greater amounts of confinement reinforcement were required to achieve the same level of axial load performance as the UHPC compressive strength was increased from 150 to 180 MPa. The results also showed that the amount, spacing, and configuration of transverse reinforcement, as well as their interaction significantly affected the axial load response of UHPC columns. However, increasing the amount of transverse reinforcement had the most pronounced effect on post-peak behavior. The effect of the confinement provisions in current codes (CSA A23.3-14 and ACI-318-14) on the ductility of the UHPC columns was also investigated. Based on the results, an alternative confinement expression for achieving ductile behavior in UHPC columns was proposed.


12345...>>

Results Per Page 




Please enter this 5 digit unlock code on the web page.