Title:
Testing and Finite Element Analysis of GFRP Reinforced Concrete Frame Joints
Author(s):
Nader Sleiman, Ryan Barrage, Graeme J. Milligan, and Maria Anna Polak
Publication:
Symposium Paper
Volume:
327
Issue:
Appears on pages(s):
26.1-26.18
Keywords:
corner joint; reinforced concrete; GFRP; closing moment; knee joint; finite element analysis
DOI:
10.14359/51713347
Date:
11/1/2018
Abstract:
The use of GFRP as main reinforcement in concrete structures is an attractive option for structures in aggressive environments. The use of GFRP reinforcement in frame corner joints may be problematic considering the weak link at the reinforcement bend, and it has not been previously studied. The presented experimental program studies the effect of reinforcement ratio and confinement stirrups on the behaviour of the joint. The failure mode was altered from bar rupture to failure of diagonal strut by increasing the reinforcement ratio, however had minimal effect on ultimate strength. The results also indicated a substantial increase in ultimate strength and maximum deflection with the addition of confinement stirrups. The finite element analyses performed suggested good model predictions for failure moments and deflections, but were unable to completely capture the concrete failure within the joint. The suspected cause is the modelling of the bond between the reinforcement and concrete.
Related References:
ACI Committee 440. (2015). Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars. ACI 440.1R-15. Detroit, Michigan: American Concrete Institute.
Canadian Standards Association. (2012). Design and construction of building structures with fibre-reinforced polymers. CAN/CSA S806-12. Mississauga, Ontario, Canada: CSA Group.
Canadian Standards Association. (2014). Canadian Highway Bridge Design Code (CHBDC). CAN/CSA S6-14. Mississauga, Ontario, Canada: CSA Group.
CEB-FIP, MC90. (1993). Design of concrete Structures CEB-FIP Model Code 1990. London, U.K.: British Standard Institution.
Dassault Systems. (2012). ABAQUS Analysis user’s manual 6.12. Providence (Rhode Island, USA).
Genikomsou, A. S., & Polak, M. A. (2015). Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Engineering Structures, 98, 38-48.
Genikomsou, A., & Polak, M. A. (2017). Finite Element Simulation of Concrete Slabs with various Placement and Amount of Shear Bolts. Procedia Engineering, 193, 313-320.
Johansson, M. (2001). Reinforcement Detailing in Concrete Frame Corners. ACI Structural Journal, 98(1), 105-115.
Kemp, E., & Mukherjee, P. (1968, October). Inelastic Behaviour of Concrete Knee Joints. The Consulting Engineer, 44-48.
Luo, Y. H., Durrani, A. J., Bai, S., & Yuan, J. (1994). Study of Reinforcing Detail of Tension Bars in Frame Corner Connections. ACI Structural Journal, 91(4), 486-496.
Mayfield, B., Kong, F.-k., Bennison, A., & Davies, J. C. (1971). Corner Joint Details in Structural Lightweight Concrete. ACI Journal, 68(5), 366-372.
Sleiman, N. (2017). Tests on GFRP Reinforced Concrete Knee-Joints Subjected to Negative Moments. Masters' Thesis. Waterloo, Ontario, Canada: University of Waterloo.
Stoner, J. (2015). Finite Element Modelling of GFRP Reinforced Concrete Beams. Masters' Thesis. Waterloo, Ontario, Canada: University of Waterloo.
Swann, R. (1969). Flexural Strength of Corners of Reinforced Concrete Portal Frames. Technical Report TRA/434. London: Cement and Concrete Association.