Sessions & Events


All sessions and events take place in Eastern Standard Time (adjusted for daylight savings time) - (UTC - 4).

All sessions & events are included in convention registration.

Change the Time Zone by selecting from the list below:

Convention Highlights

Monday, October 18, 2021


10:00 AM - 12:00 PM

Moderators: Lawrence L Sutter, Thomas J Van Dam

This session will honor Michael Thomas, PhD, PEng, FACI, FICT, for his extensive contributions to advancing cement and concrete research, and his service to the concrete industry. Various industry leaders will discuss the impacts of the research conducted by Dr. Thomas and his students in the areas of supplementary cementitious materials (SCMs), alkali-silica reaction (ASR) mechanisms, mitigation, and testing; sulfate resistance; chloride-induced corrosion; and other areas of concrete durability.
Learning Objectives:
(1) Explain the role of exposure sites for studying alkali-silica reaction (ASR);
(2) Illustrate how supplementary cementitious materials (SCMs) mitigate ASR?;
(3) Describe how chloride ingress-based service-life models work;
(4) Summarize how service life modeling can be applied to real-world situations.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


10:00 AM - 11:00 AM

Moderator: Kimberly Waggle Kramer

Understanding the basics of reinforced concrete column design, detailing, and constructability is imperative but is not always clearly understood. This session will cover the basics of column design, including discussion on interaction diagram. Topics will include key column design considerations such as reinforcing layout, concrete mix design, joint design/detailing, member slenderness, and constructability. The presentation will highlight several real-world project examples to show the critical interrelationship of code provisions and construction techniques to achieve efficient and elegant designs for these crucial structural elements. Where this methodology is outlined in ACI 318 will be presented.
Learning Objectives:
(1) Define short, intermediate, and slender reinforced columns;
(2) Explain the basics of short column-interaction diagrams;
(3) Identify software tools available for analysis;
(4) Summarize best practices for detailing.

This session has been approved by AIA and ICC for 1 PDH (0.1 CEU). Please note: You must attend the live session for the entire duration to receive credit. Mini Sessions will not be available on-demand.


10:00 AM - 12:00 PM

Moderators: Ali Ghahremaninezhad, Mohammed Albahttiti

This session will feature presentations of original, unpublished results from ongoing research projects and leading-edge concrete technology and research throughout the world.
Learning Objectives:
(1) Recognize ongoing concrete research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to structural and material aspects of concrete research;
(3) Describe engaging ideas in concrete research;
(4) Summarize recent technical information related to concrete materials and structures research.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


10:00 AM - 12:00 PM

Moderator: Kay Wille

In the last decade ultra-high-performance concrete (UHPC) has significantly attracted the interest of researchers and practitioners due to its material performance and its potential for innovative practical applications. It has become one of the most influential materials in the construction industry in the twenty-first century. After years of innovations in material, structural and architectural design what are the current UHPC hot topics? This session will invite national and international research groups, material suppliers and contractors to share their knowledge of hot topics of UHPC.
Learning Objectives:
(1) Define architectural UHPC;
(2) List potential applications of UHPC overlays;
(3) Discuss the opportunity of using sprayed UHPC;
(4) Summarize field implementation of UHPC for beam end repair.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


10:00 AM - 12:00 PM

Moderators: Danielle Kennedy, Lauren G McCauley

What I Wish I knew session, aims to provide insights on the life of a young professional in the concrete industry. This session will explore the challenges, factors, problems, and solutions of having a good work life balance. The panel will discuss the different points of view and specific challenges they face to maintain the balance. The panel, in addition to sharing their experiences, will discuss a variety of solutions and techniques to help other tackle their work life balance challenges.
Learning Objectives:
(1) Describe what work life balance means;
(2) Summarize challenges and problems that may affect work life balance;
(3) Identify strategies to manage your time better to achieve a good work life balance;
(4) Discuss solutions and techniques based on the panelists experiences.

* Certificates of PDH credit will not be issued for this session.


10:00 AM - 9:00 PM

YOUR SUPPORT NEEDED!

At each ACI Convention, the Women in ACI provide two deserving young professionals with a Young Professional Convention Sponsorship. This award pays the convention registration fee for these young professionals to help foster their ACI careers. Since inception, WACI has awarded over 19 Young Professional Convention Sponsorships. Please join your fellow ACI members in supporting the Young Professional Convention Sponsorship program by participating in the virtual Concrete Auction. Items featured at the auction are donated or created by ACI members and university students. All proceeds of the auction benefit the Young Professional Convention Sponsorship. Visit the virtual auction site and view the many wonderful and unique auction items you can purchase to support ACI Young Professionals! Your participation in this event is appreciated.


12:00 PM - 1:00 PM

Speaker: David Moody
Title: Changing Directions is Not the Same as Quitting
So often we are told to chase our passions. There is a difference between our passion and what we are truly good at doing. Moody thought he would be the next Frank Lloyd Wright, got his 5-year professional degree in architecture and started pursuing that dream. Then, Moody took a construction filed assignment and realized he would be just an average architect, but he could be a really good builder. Moody will discuss that pivot in his life and what it is like to be an entrepreneur.


1:00 PM - 3:00 PM

Moderators: Ahmed Al-Rahmani, Robert Thomas

The ACI 123 Student Poster Session complements the existing Research in Progress and Open Topic sessions and provides further opportunity for the presentation of original, unpublished results from ongoing research projects and leading-edge concrete technology throughout the world.
Learning Objectives:
(1) Recognize ongoing cementitious materials research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to material aspects of concrete research;
(3) Describe emerging ideas in concrete materials research; and
(4) Summarize recent technical information related to concrete materials research.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


1:00 PM - 3:00 PM

Moderators: Nur Yazdani, Ben Dymond

The session will focus on live load distribution issues for concrete bridge decks and supporting girders. In addition to discussing the AASHTO methodology, other available codes/specification provisions will be reviewed. Potential topics related to live load distribution include, but are not limited to, simplification of the AASHTO methodology, traffic non-parallel to girders, construction stage issues, partial composite deck-girder systems, long-span girders, slab-span structures, and bridges with missing as-built plans.
Learning Objectives:
(1) Understand the basis of AASHTO live load distribution factors and simplification options for girder bridges;
(2) Determine AASHTO knowledge gaps and ways to plug them for girder bridges;
(3) Consider real-life implications of design, evaluation, construction, and maintenance issues for girder bridges;
(4) Identify advanced numerical analysis or experimental load testing techniques used to determine live load distribution for girder bridges.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


1:00 PM - 3:00 PM

Moderators: Ali Ghahremaninezhad, Mohammed Albahttiti

This session will feature presentations of original, unpublished results from ongoing research projects and leading-edge concrete technology and research throughout the world.
Learning Objectives:
(1) Recognize ongoing structural reinforced concrete research projects from a wide range of research topics;
(2) Discuss recent techniques, research methods, and procedures related to structural aspects of concrete research;
(3) Describe engaging ideas in structural concrete design and research;
(4) Summarize recent technical information related to concrete structures.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


3:30 PM - 4:30 PM

Moderator: Ali Ghahremaninezhad

The early-age properties of concrete materials have a significant effect on the long-term performance of concrete structures. A fundamental understanding of the properties of concrete at early age is critical to ensure long-term structural integrity and safety of concrete structures. A number of methods of early-age testing have been introduced to allow predictions of the long-term durability of concrete. The objective of this session is to bring together researchers, material suppliers, and contractors to discuss the recent developments in early-age testing for long-term performance of concrete. Abstracts that provide fundamental or practical contributions are invited.
Learning Objectives:
(1) Increase awareness about the importance of early-age properties for long-term durability;
(2) Provide a forum for exchange of ideas related to early-age testing for long-term performance;
(3) Foster future sessions on innovative methods for early-age testing for long-term performance;
(4) Enhance the multidisciplinary aspect of innovative cement and concrete research.

This session has been approved by AIA and ICC for 1 PDH (0.1 CEU). Please note: You must attend the live session for the entire duration to receive credit. Mini Sessions will not be available on-demand.


4:00 PM - 6:00 PM

Moderators: Lawrence L Sutter, Thomas J Van Dam

This session will honor Michael Thomas, PhD, PEng, FACI, FICT, for his extensive contributions to advancing cement and concrete research, and his service to the concrete industry. Various industry leaders will discuss the impacts of the research conducted by Dr. Thomas and his students in the areas of supplementary cementitious materials (SCMs), alkali-silica reaction (ASR) mechanisms, mitigation, and testing; sulfate resistance; chloride-induced corrosion; and other areas of concrete durability.
Learning Objectives:
(1) Report the cause of delayed ettringite formation (DEF) and how can it be prevented;
(2) Discuss sulfate attack and the influence of SCMs and ground limestone;
(3) Explain the impact of the marine environment on concrete and how it can be mitigated;
(4) Outline the value of academic research to the concrete industry.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


4:00 PM - 6:00 PM

Moderators: Nur Yazdani, Ben Dymond

The session will focus on live load distribution issues for concrete bridge decks and supporting girders. In addition to discussing the AASHTO methodology, other available codes/specification provisions will be reviewed. Potential topics related to live load distribution include, but are not limited to, simplification of the AASHTO methodology, traffic non-parallel to girders, construction stage issues, partial composite deck-girder systems, long-span girders, slab-span structures, and bridges with missing as-built plans.
Learning Objectives:
(1) Discuss why the extra load effect from AASTHO GDF’s and other equations provides additional load carrying capacity to enhance load rating of bridges;
(2) Review the development of a fatigue consumption formula to calculate fatigue damage cause by the state-specific traffic loads;
(3) Explain how to use a FEM model to capture the distribution of loads across a bridge width;
(4) Summarize procedures to evaluation live load distribution and perform load ratings using digital image measurements.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


4:00 PM - 6:00 PM

Moderators: Chris C Ramseyer, Ken Vallens

The objective of this session is to introduce the latest design guide for shrinkage compensating concrete.
Learning Objectives:
(1) Disseminate the latest design and construction practices for shrinkage compensating concrete;
(2) Discuss the latest research concerning shrinkage compensating concrete;
(3) Expand the use and understanding of shrinkage compensating concrete;
(4) Explain that concrete cracks are not something a client must live with.

This session has been approved by AIA and ICC for 2 PDHs (0.2 CEUs). Please note: You must attend the live session for the entire duration to receive credit. On-demand sessions do not qualify for PDH/CEU credit.


5:00 PM - 6:00 PM

Everyone is invited to attend a virtual reception sponsored by the Women in ACI. During this reception, the Women in ACI will announce the winners of the Young Professional Convention Sponsorship, recognize women who have made significant contributions to the industry, and introduce the Women In ACI’s new Mentoring Program. Breakout rooms with games such as trivia, Bingo, and a virtual scavenger hunt will provide attendees with the opportunity for fellowship and fun. This event has a long history at ACI and has grown from a small gathering of women attendees to an event attended by all convention demographics. Attendees will have the opportunity to participate in the online Concrete Art Auction Sponsored by Women in ACI. Proceeds from the auction benefit young professionals by providing them with a paid convention registration. So please come join the Women in ACI and support young professionals!

You are invited to support the Young Professional Convention Sponsorship program by attending the virtual Concrete Art Auction Sponsored by Women in ACI. All proceeds of the auction benefit the Young Professional Convention Sponsorship. Visit the virtual auction site and check out the concrete pens, concrete desk accessories, concrete decorative items, and artwork donated by ACI members. Bid on an item today and Support our Young Professionals’ participation in ACI!


6:00 PM - 7:30 PM

The Excellence in Concrete Construction Awards honors exceptional concrete construction from around the world. Recently completed and nominated concrete projects were juried by an independent panel of industry professionals for the degree of innovation, complexity, achievement, and value that concrete as a material provided to the project. The awards presentation will highlight project details through short videos that will accompany the presentation of first and second place awards in each category. At the conclusion only one project will stand out by receiving the overall Excellence award. To learn more details about each winning project, be sure to attend the Excellence Awards – Project Presentations on Tuesday, October 19 from 1:00 pm – 3:00 pm

All registered convention attendees are invited to join this virtual awards presentation, celebrating concrete excellence from around the world.



Upper Level Sponsors

Baker
Brasfield Gorrie
Concrete Sealants, Inc.
GCP
Holcim
Metromont Corporation
PS=0
Precision
Thomas Concrete
UZUN + CASE

Please enter this 5 digit unlock code on the web page.