I. Title - 70 Characters Maximum, including spaces between words.
II. Authors' Names and Affiliations - First name, middle initial (if any), last name (given name first, followed by family name or surname). For affiliations, list the institution and department names in full (if applicable), city, state/province, postal code, and country (if not the United States).
III. Biographical Sketch of Authors - 75 Words Maximum For each author, include:
- Current job title and place of employment (include location: city, state/province, country [if other than the U.S.]).
- Education: degrees earned and schools attended (include name, city, state/province, country [if other than the U.S.]).
- ACI affiliations: committee membership and/or awards received.
- Research interests.
EX: ACI member John Smith is a Professor at the University of Toronto, Toronto, ON, Canada. He received his BS, MS, and PhD in civil engineering from the University of Nevada, Las Vegas, Nev., in 1985, 1987, and 2000, respectively. He is a member of ACI Committee 117, Tolerances. He received the ACI Wason Medal for Materials Research in 1988. His research interests include shear strength and seismic design of reinforced concrete structures.
IV. Abstract or Synopsis - 150 Words Maximum Include on the first page of the manuscript with a concise statement of the principal findings and conclusions. Do not cite references, figures, or tables in the abstract or synopsis.
V. Keywords - 9 Keywords Maximum Used for indexing and other information-retrieval purposes. For a source of keywords, consult ACI 116R-00, "Cement and Concrete Terminology."
VI. Body of Main Text
Typical sections should include:
- Research Significance—100 Words Maximum that identifies the significance and potential impact of the reported work on the state of the art or state of practice
- Experimental investigation or procedure (this may involve laboratory investigations and/or field investigations)
- Analytical investigation or procedure (this may involve development of models and or verification of existing procedures)
- Comparison of predictions and experimental results
- Discussion of results
- Summary and conclusions
Please do not place the text of the manuscript in text boxes (including abstract, keywords, numerical expressions, symbols, tables, and notations). Please do not number your headings.
VII. Acknowledgments - If the author(s) wishes to recognize any individuals, organizations, or agencies for assistance or support for the reported work.
VIII. List of Notations, Definitions, and Symbols - Should be provided on a separate page and should be double spaced. Notations can be listed under equations if there are only a few. Do not format notations as a table and do not place notations or symbols in text boxes.
IX. References - List author's last name (surname); first name and middle name initials (for all authors); title of the paper; name of the publication or periodical; name of the publisher, (city) and country of publication (if not the United States); volume number; issue number; (month) and year of publication; and inclusive page numbers.
The list of references can be submitted in numerical or parenthetical format. Numerical references must be cited in sequential order throughout the body of the text, i.e., 1, 2, 3,...
Sample numerical references:
1. Mejia, C.; Brown, T.; and Flores, P., "Studies of Shear Reinforcement," Principles of Concrete, 2000, pp. 36-43.
2. DiAmato, S., and Jenner, W., "Mechanisms of Shear Resistance," ACI Structural Journal, V. 103, No. 1, Jan.-Feb. 2006, pp. 67-74.
Sample of parenthetical reference (to be listed in alphabetical order in the Reference Section):
Carr, H. R., 2000, "Evaluation of T-Joints Using CFRP Composites," Advances in Engineering, University of Canterbury, Christchurch, New Zealand, 234 pp.
Reference information should be complete and accurate (including spelling). Reference titles should be capitalized where necessary. Do not reference a work that has NOT been published or accepted for publication (that is, manuscripts that have only been submitted for publication).
X. Appendices - Data of secondary importance or data needed to support assertions in the text that is provided in appendices should be referenced in the body of the main text. If the manuscript and appendices combined exceed the 10,000 words or word equivalent count, the appendices WILL NOT be published in the printed journal. (Subsequently, the appendices will appear in PDF format on the ACI website, in their original, unedited form, as addenda of the published paper.) The appendices will also be available in hard copy to anyone who contacts ACI (and pays for applicable shipping and handling of the hard copy). You also have the option to shorten your manuscript to include the appendices within the 10,000 word limit.
XI. Tables and Figures - Figures will be reduced to approximately 85 mm (3.3 in.) in width for printing. Line drawings will be reduced as much as possible while retaining the clarity and detail of the configuration; usually the reduced size does not exceed 85 mm (3.3 in.) in width. Large lettering and heavy line weights should be used in line drawings so that they will be clear and sharp after reduction.
Figures will not be printed in color in the physical journals and, therefore, color should not be relied on as a distinction between lines in a graph, finite element printout, or photograph. However, the on-line journal editions are distributed in color. So please send color figures if available.
Do not place tables as graphics into your final manuscript.
XII. List of Tables - Provide a list of table captions that will serve as identifying labels. The list of table captions must be double-spaced on a separate page and should be provided after the appendices (if any).
XIII. List of Figures - Provide a single list of figure captions, that will serve as identifying labels. The list of figure captions must be double-spaced on a separate page and should be provided after the list of tables.
Every symbol must be defined and multiple meanings should be avoided. Numerals and letters must be clearly distinguished. Equations should appear on individual lines and should be numbered. Equation Maker should only be used when creating stand-alone equations. The symbol font may be used when inserting symbols within the body of the text. Do not place numerical expressions or symbols in text boxes within the body of the text.
Gender-Specific Words in Generic Contexts
Use words such as "author," "discusser," "engineer," and "researcher," instead of "he," "she," "his," "her," "our," and "we."